Stationary phase enhancement

Another completely different effect of temperature is the influence on viscosity and on diffusion coefficients. This is largely a kinetic effect, which improves efficiency (i.e., peak width). There are two different mass transfer effects here. One is mobile mass transfer. An increase of temperature reduces the viscosity of the mobile phase. However, an increase of the temperature also increases the diffusion coefficients of the solute in both the mobile phase and the stationary phase (enhancing stationary phase mass transfer). " ... 

From equation 12.1 it is clear that resolution may be improved either by increasing Afr or by decreasing wa or w-q (Figure 12.9). We can increase Afr by enhancing the interaction of the solutes with the column or by increasing the column s selectivity for one of the solutes. Peak width is a kinetic effect associated with the solute s movement within and between the mobile phase and stationary phase. The effect is governed by several factors that are collectively called column efficiency. Each of these factors is considered in more detail in the following sections. 

Heteroboranes, compounds where one or more of the cage borons are replaced by a main group element (33), are not themselves commercially available. However, carborane sdoxanes containing > -carborane [16986-21 -6], C2H22B2Q, are available under the trade name of Dexsd for the stationary phase in gas—Hquid chromotography (qv) (34). The carborane, l,7-dicarba-c/(9j (9-dodecaborane(10) (35), contributes enhanced chemical and thermal stabiHty to the sdoxane polymer. 

In the course of mixture separation, the composition and properties of both mobile phase (MP) and stationary phase (SP) are purposefully altered by means of introduction of some active components into the MP, which are absorbed by it and then sorbed by the SP (e.g. on a silica gel layer). This procedure enables a new principle of control over chromatographic process to be implemented, which enhances the selectivity of separation. As a possible way of controlling the chromatographic system s properties in TLC, the pH of the mobile phase and sorbent surface may be changed by means of partial air replacement by ammonia (a basic gaseous component) or carbon dioxide (an acidic one). 

In common with all multidimensional separations, two-dimensional GC has a requirement that target analytes are subjected to two or more mutually independent separation steps and that the components remain separated until completion of the overall procedure. Essentially, the effluent from a primary column is reanalysed by a second column of differing stationary phase selectivity. Since often enhancing the peak capacity of the analytical system is the main goal of the coupling, it is the relationship between the peak capacities of the individual dimensions that is crucial. Giddings (2) outlined the concepts of peak capacity product and it is this function that results in such powerful two-dimensional GC separations. 

At the current time, there is considerable interest in the preparative applications of liquid chromatography. In order to enhance the chromatographic process, attention is now focused on the choice of the operating mode [22]. SMB offers an alternative to classical processes (batch elution chromatography) in order to minimize solvent consumption and to maximize productivity where expensive stationary phases are used. 

The stationary phase matrices used in classic column chromatography are spongy materials whose compress-ibihty hmits flow of the mobile phase. High-pressure liquid chromatography (HPLC) employs incompressible silica or alumina microbeads as the stationary phase and pressures of up to a few thousand psi. Incompressible matrices permit both high flow rates and enhanced resolution. HPLC can resolve complex mixtures of Upids or peptides whose properties differ only slightly. Reversed-phase HPLC exploits a hydrophobic stationary phase of... 

---