Standard Methods, part

Appendix A2 Standard Methods, part 7000—Radioactivity (Standard Methods 2005)... 

Marecek and colleagues developed a new electrochemical method for the rapid quantitative analysis of the antibiotic monensin in the fermentation vats used during its production. The standard method for the analysis, which is based on a test for microbiological activity, is both difficult and time-consuming. As part of the study, samples taken at different times from a fermentation production vat were analyzed for the concentration of monensin using both the electrochemical and microbiological procedures. The results, in parts per thousand (ppt), are reported in the following table. 

Method of Testfor the Ignitability of Upholstered Compositesfor Seating, British Standard 5852 part 2, British Standards Institute, London, 1983. 

British Standard Methods for the Determination of Particle Sis e Powders, Part I, Subdivision of Gross Sample Down to 0.2 Milliliters, BS3406 Part I, British Standards, London, 1961. 

Labor productivity is very much dependent on the health and well-being of the workers and also on the availability of laborsaving tools and construction equipment. The frequency of strikes, hohdays, slowdowns, and pohtical unrest will also depress productivity. Closed-shop practices or demarcation disputes will also affect the productivity of labor. The use of standard equipment, parts, and methods tends to improve productivity. 

CFR Part 60 (Appendix A) New source performance standards Methods 1-4 Test location, volumetric flow rate, gas composition, moisture content... 

We present here examples of this condensation with an aromatic aldehyde and a cyclic ketone. Both of these examples are useful because, although other methods are available for their preparation, problems often attend these syntheses. In the synthesis of cyclohexy11deneaceton1tr11e, for example, the standard method results exclusively In the g.y-lsomer and none of the a,g-Isomer. In Part A of this procedure, cyclohexanone Is condensed with acetonitrile to give predominantly the conjugated Isomer (80-83%) whicfi is then separated from the nonconjugated isomer by selective bromination. 

The primary goal of this series of chapters is to describe the statistical tests required to determine the magnitude of the random (i.e., precision and accuracy) and systematic (i.e., bias) error contributions due to choosing Analytical METHODS A or B, and/or the location/operator where each standard method is performed. The statistical analysis for this series of articles consists of five main parts as ... 

Standard method of test for continuous analysis and automatic recording of the oxidant content of the atmosphere. Designation D 2011-65 (Reapproved 1972), pp. 924-928. In 1973 Annual Book of ASTM Standards. Part 23. Water Atmospheric Analysis. Philadelphia American Society for Testing and Materials, 1973. 

Standard Methods for the Examination of Water and Waste Water XIV Edition - APHA, AWWA, WPCF, Part 918A, 997. 

Standard Methods fot the Exahmiation of Water and Waste Water XIV Edition - APHA, AWWA, WPCF, Part 909, 928 and following. Glater, J., Effect of Halogens on Performance and Durability of RO Membranes, presented at 2nd Chemical Congress of the North American Continent, Las Vegas, 1980. 

N cuum technology standard method for calibrating vacuum gauges through direct comparison with a reference device Part 1 - General principles 5/76... 

N cuum gauges - standard methods for calibration Part 1 - Pressure reduction by continuous flow in the pressure range 10 . .. 10" Pa. 2/91... 

---