Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Stability Operating Procedures structure

A cycle of repeated adsorption-desorption experiments is currently under way. It aims to determine the long-term operational characteristics of adsorbents and the stability of adsorption/structural properties. The results already obtained appear to be quite promising the properties of adsorbents are comparable with those shown by the adsorbents synthesized in a two-step procedure with TEOS as a silica precursor. [Pg.863]

After the start-up heating procedure, stable operation of the fuel processor needs to be achieved. Micro structured devices allow for rapid system stabilization due to the fast dynamic response at the low residence times applied. [Pg.287]

In the most recent iteration of the feedback loop which relates molecular structure to solid-state device performance, the fast bistable [2]rotaxane 11" has been superseded " by the modified and improved version shown in Fig. 1.15, namely, the [2]rotaxane The impetus for this iteration was at least two-fold (1) to produce a molecular switch in which the bistable rotaxane starts off exclusively in one, and only one, of its two possible co-conformations and (2) to incorporate into this all-or-nothing switch enhanced oxidative stability by removing all of the phenolic residues from the hydrophilic stopper. The rotaxane, which was obtained (Fig. 1.15) by the now well-established templation protocol, has been incorporated by the familiar fabrication procedures into an 8 x 8 crossbar device (Fig. 1.16(a)). Fig. 1.16(b) demonstrates one of these 64-bit devices in operation with the exception of one of the wires, i.e., 56 out of the 64 bits can be switched. This device has been used to store (Fig. 1.16(c)) the letters DARPA in ASCII code the lifetime of the switch-closed state of this devices is about 10 minutes. The proposed electromechanical switching mechanism for the bistable [2]rotaxane which is outlined in Fig. 1.17, merits comparison with that already discussed in Fig. 1.16 for the bistable [2]rotaxane In the case of it is proposed that oxidation of the TTF unit to its radical cation (TTF ) occurs when a +2 V bias is applied across the bistable [2]rotaxane and the tetracationic cyclophane moves to encircle the... [Pg.20]

Operability and maintainability. The control system of the plant was designed and checked fbr plant stability with no significant oscillation or deviation for 10% stepwise changes and 5% ramp changes in reactor power. ISI of the primary major components was implemented for the structural concept based on the ISI policy(draft) established for the DFBR. It is confirmed that the major components and main piping in the primary loop can be repaired and maintained. Maintenance methods and procedures were examined using 3-dimensional CAD simulation. It was confirmed that regular maintenance and inspection works can be carried out within 60 days. [Pg.468]


See other pages where Stability Operating Procedures structure is mentioned: [Pg.975]    [Pg.438]    [Pg.742]    [Pg.263]    [Pg.78]    [Pg.130]    [Pg.557]    [Pg.159]    [Pg.17]    [Pg.123]    [Pg.1843]    [Pg.261]    [Pg.246]    [Pg.207]    [Pg.33]    [Pg.148]    [Pg.55]    [Pg.310]    [Pg.493]    [Pg.1856]    [Pg.240]    [Pg.233]    [Pg.107]    [Pg.57]    [Pg.316]    [Pg.96]    [Pg.230]    [Pg.453]    [Pg.11]    [Pg.626]    [Pg.398]    [Pg.593]    [Pg.515]    [Pg.302]    [Pg.210]    [Pg.217]    [Pg.2043]    [Pg.526]    [Pg.330]    [Pg.656]    [Pg.20]    [Pg.427]    [Pg.26]    [Pg.1109]    [Pg.498]   
See also in sourсe #XX -- [ Pg.304 ]




SEARCH



Operational procedure

Operational stability

Operations Procedures

Operations structure

Operator structure

Stability Operating Procedures

Stability structure

Stabilization procedure

Stabilization structural

© 2024 chempedia.info