Sonochemical polymerization method

As mentioned earlier, polymerization techniques can also be used in the presence of nanotubes for preparation of polymer/CNT nanocomposite materials. In these, in-situ radical polymerization techniques of polymerization in the presence of CNT filler under or without applied ultrasound. Both new factors (presence of CNT and ultrasound) can affect reaction kinetics, stability of suspension or the size of prepared particles. For example, ultrasound waves can open C=C bond of monomer, which starts polymerization initiation. Thus vinyl monomers (styrene, methyl methacrylate or vinyl acetate) can be polymerized without addition of initiator, only by application of ultrasound. This is called sonochemical polymerization method (15,33,34). 

Metallic nanopartides were deposited on ceramic and polymeric partides using ultrasound radiation. A few papers report also on the deposition of nanomaterials produced sonochemically on flat surfaces. Our attention will be devoted to spheres. In a typical reaction, commerdally available spheres of ceramic materials or polymers were introduced into a sonication bath and sonicated with the precursor of the metallic nanopartides. In the first report Ramesh et al. [43] employed the Sto-ber method [44] for the preparation of 250 nm silica spheres. These spheres were introduced into a sonication bath containing a decalin solution of Ni(CO)4. The as-deposited amorphous clusters transform to polyciystalline, nanophasic, fee nickel on heating in an inert atmosphere of argon at a temperature of 400 °C. Nitrogen adsorption measurements showed that the amorphous nickel with a high surface area undergoes a loss in surface area on crystallization. 

The chemical methods for the preparation of nanomaterial could be categorized as either template-directed or template-free. The template synthesis methods commonly used for the production of one-dimensional nanostructured PANI are further subdivided into hard template (physical template) synthesis and soft template (chemical template) synthesis approach according to the solubility of the templates in the reaction media. Non-template routes for the synthesis of one-dimensional nanostructured PANI such as rapid-mixing reaction method, radiolytic synthesis, interfacial polymerization, and sonochemical synthesis have also been reported [56], Other approaches like combined soft and hard template synthesis are also known. An overview of hard-template, soft-template, and template-free procedures are presented in the following paragraphs. 

The sonochemical method has been found useful in many areas of material science, starting from the preparation of amorphous products - and insertion of nanomaterials into mesoporous materials, to deposition of nanoparticles on ceramic and polymeric surfaces. ... 

Various methods have been used for the synthesis and smdies of the chemical and physical properties of the polymeric membrane reactor with embedded nanoparticles. These methods include sonochemical, ultraviolet (UV), and y irradiation, and chemical reduction by reducing agents such as borohydrides and hydrazine. Studies have revealed the successful synthesis of cellulose acetate thin film with embedded bimetallic nanopaiticles such as Ni/Fe, Pd/Co, and monometallic Pd for the catalytic dechlorination and hydrogenation processes (Liu et al., 1997 Liu et al., 2000 Meyer et al., 2004). Catalytically active... 

---