Solvents cycloaddition

The stereochemistry of these reactions depends on the lifetime of the dipolar intermediate, which, in turn, is influenced by the polarity of the solvent. In the reactions of enol ethers with tetracyanoethylene, the stereochemistry of the enol ether is retained in nonpolar solvents. In polar solvents, cycloaddition is nonstereospecific, as a result of a longer lifetime for the zwitterionic intermediate.177... 

Narasaka reported that TADDOL-TiCl2 was able to catalyze asymmetric DA reaction of cyclopentadiene with oxazolidinone derivatives of acrylates in the presence of 4A MS [148]. A remarkable solvent effect on the enantioselectivity was observed, and high enantioselectivity was attained using mesitylene as the solvent. Cycloadditions to oxazolidinone derivatives of acrylates were also efficiently catalyzed by dendritic or polymer-supported TADDOL-Ti catalysts [149]. From the structural determination of the 3-(( )-3-cinnamoyl)-l,3-oxazolidin-2-one adduct, it can be deduced that the transition state involves binding of the dienophile to the titanium catalyst via the N-acyl-oxazolidinone [19a] (Scheme 14.59). The diastereo-and enantioselectivity of this type of catalyst are thus probably owing to both electronic and steric effects from TADDOL ligand. 

Wijnen, f.W., Zavarise, S., Engberts, J.B.F.N. and Charton, M., Substituent effects on an inverse electron demand hetero Diels Alder reaction in aqueous solution and organic solvents cycloaddition of substituted styrenes to di(2 pyridyl) 1,2,4,5 tetrazine, /. Org. Chem., 1996,61, 2001-2005. 

Recently the solvent effect on the [4+2] cycloaddition of singlet oxygen to cyclic dienes has been subjected to a multiparameter analysis. A pre-equilibrium with charge-transfer character is involved, which is affected by the solvent through dipolarity-polarisability (n ) and solvophobic interactions ( Sjf and Another multiparameter analysis has been published by Gajewski, demonstrating the... 

Alternatively, authors have repeatedly invoked the internal pressure of water as an explanation of the rate enhancements of Diels-Alder reactions in this solvent ". They were probably inspired by the well known large effects of the external pressure " on rates of cycloadditions. However, the internal pressure of water is very low and offers no valid explanation for its effect on the Diels-Alder reaction. The internal pressure is defined as the energy required to bring about an infinitesimal change in the volume of the solvents at constant temperature pi = (r)E / Due to the open and... 

Dramatic rate accelerations of [4 + 2]cycloadditions were observed in an inert, extremely polar solvent, namely in5 M solutions oflithium perchlorate in diethyl ether(s 532 g LiC104 per litre ). Diels-Alder additions requiring several days, 10—20 kbar of pressure, and/ or elevated temperatures in apolar solvents are achieved in high yields in some hours at ambient pressure and temperature in this solvent (P.A. Grieco, 1990). Also several other reactions, e.g, allylic rearrangements and Michael additions, can be drastically accelerated by this magic solvent. The diastereoselectivities of the reactions in apolar solvents and in LiClO EtjO are often different or even complementary and become thus steerable. 

Most ozonolysis reaction products are postulated to form by the reaction of the 1,3-zwitterion with the extmded carbonyl compound in a 1,3-dipolar cycloaddition reaction to produce stable 1,2,4-trioxanes (ozonides) (17) as shown with itself (dimerization) to form cycHc diperoxides (4) or with protic solvents, such as alcohols, carboxyUc acids, etc, to form a-substituted alkyl hydroperoxides. The latter can form other peroxidic products, depending on reactants, reaction conditions, and solvent. 

A versatile method for the synthesis of a variety of five-membered heterocycles and their ring-fused analogs involves the reaction of a neutral 47r-electron-3-atom system with a 27T-electron system, the dipolarophile, which is usually electron deficient in nature. Available evidence, e.g. retention of dipolarophile stereochemistry in the product and solvent polarity exerting only a moderate influence on the reaction, indicates that the cycloaddition proceeds via a concerted mechanism 63AG(E)565, 63AG(E)633, 68JOC2291) and may be represented in general terms by the expression in Scheme 8. 

Solvent has an important influence on the course of this cycloaddition, and in the reaction of 2,5-dimethylthiazole with DMAD in DMF the product analogous to (415) was obtained. However, in DMSO or acetonitrile a thiazolo[3,2-a]azepine was formed in addition to this product, whereas with THF, dichloromethane or nitromethane, only the thiazoloazepine was isolated. 

In this section, reactivity studies will be emphasized while in those devoted to synthesis (Section 4.04.3) theoretical calculations on reactions leading to the formation of pyrazoles (mainly 1,3-dipolar cycloadditions) will be discussed. It should be emphasized that the theoretical treatment of reactivity is a very complicated problem and for this reason, most of the calculations have been carried out on aromatic compounds, as they are the easiest to handle. In general, solvents are not taken into account thus, at the best, the situation described theoretically corresponds to reactions taking place in the gas phase. 

The present preparation illustrates a general and convenient irethod for ring contraction of cyclic ketones. The first step is the usual procedure for the preparation of enamines. The second step involves 1,3-dipolar cycloaddition of diphenyl phosphorazidate to an enamine followed by ring contraction with evolution of nitrogen. Ethyl acetate and tetrahydrofuran can be used as a solvent in place of toluene. Pyrrolidine enamines from various cyclic ketones smoothly undergo the reaction under similar reaction conditions. Diphenyl (cycloalkyl-1-pyrrolidinylmethylene)phosphoramidates with 5,6,7, and 15 members in the ring have been prepared in yields of 68-76%. 

Nitroolefins also offer the possibilities of 1,2 cycloaddition (37,57) or simple alkylation (57-59) products when they are allowed to react with enamines. The reaction of nitroethylene with the morpholine enamine of cyclohexanone led primarily to a cyclobutane adduct in nonpolar solvents and to a simple alkylated product in polar solvents (57). These products are evidently formed from kinetically controlled reactions since they cannot be converted to the other product under the conditions in which the other... 

Stable sulfenes have been isolated by treating methanesulfonyl chloride, with triethylamine or trimethylamine in acetonitrile solvent at -40°C (165,166). These stable sulfenes undergo 1,2 cycloaddition with enamines to form the expected thietanes (trimethylenesulfones). 

The mechanism of the cycloaddition of phenyl azide to norbornene has been shown to involve a concerted mechanism with a charge imbalance in the transition state (199). In a similar manner the cycloaddition of phenyl azide to enamines apparently proceeds by a concerted mechanism (194, 194a). This is shown by a rather large negative entropy of activation (—36 entropy units for l-(N-morpholino)cyclopentene in benzene solvent at 25°C), indicative of a highly ordered transition state. Varying solvents from those of small dielectric constants to those of large dielectric constants has... 

The validity of the model was demonstrated by reacting 35 under the same reaction conditions as expected, only one diastereoisomer 41 was formed, the structure of which was confirmed by X-ray analysis. When the vinylation was carried out on the isothiazolinone 42 followed by oxidation to 40, the dimeric compound 43 was obtained, showing that the endo-anti transition state is the preferred one. To confirm the result, the vinyl derivative 42 was oxidized and the intermediate 40 trapped in situ with N-phenylmaleimide. The reaction appeared to be completely diastereoselective and a single diastereomer endo-anti 44 was obtained. In addition, calculations modelling the reactivity of the dienes indicated that the stereochemistry of the cycloaddition may be altered by variation of the reaction solvent. 

Reaction of 2-(A -allylamino)-3-formyl-4//-pyrido[l, 2-u]pyrimidin-4-ones 219 in EtOH with HONH2 HCI yielded ( )-oximes 220 at 0°C and 221 (R = PhCH2) under reflux. Heating 220 (R = H) in a boiling solvent afforded cw-fused tetracyclic cycloadducts 221 (R = H). In an aprotic solvent (e.g., benzene or MeCN) the main a>fused cycloadducts 221 (R = H) were accompanied by a mixture of trauA-fused cycloadducts 222, A -oxides 223 and tetracyclic isoxazoline 224 (96T887). The basicity of the 2-allylamino moiety of compounds 219 affected the rate of the conversion. Cycloadditions were also investigated in dioxane and BuOH. 

In an extension of this work Scheeren et al. studied a series of derivatives of N-to-syl-oxazaborolidinones as catalysts for the 1,3-dipolar cycloaddition reaction of 1 with 2b [29]. The addition of a co-solvent appeared to be of major importance. Catalyst 3b was synthesized from the corresponding amino acid and BH3-THF, hence, THF was present as a co-solvent. In this reaction (-)-4b was obtained with 62% ee. If the catalyst instead was synthesized from the amino acid and... 

A mechanism for this reaction has been proposed [75], The first key intermediate in the reaction is the copper(I) acetylide 42. The additional ligand may be solvent or H2O. The acetylene moiety in 42 is activated for a 1,3-dipolar cycloaddition with the nitrone to give intermediate 43, with introduction of chirality in the product. A possible route to ris/traws-41 might be via intermediate 44. Finally, the cis isomer is isomerized into the thermally more stable trans-41. It should be mentioned that the mechanism outlined in Scheme 6.32 was originally proposed for a racemic version of the reaction to which water was added. 

The photochemical [2 + 2] cycloaddition of cyclopentene to pentaflu-oropyridine in cyclohexane gave a 1 1 adduct, which in excess olefin gave a single 1 2 adduct (37) (82JOC4462). The solvent has an important role, as in its absence two 1 2 adducts are obtained. With PhC CR in cyclohexane, the nature of R determined whether a triene (R = f-butyl) or tetraene (R = Me) was in the product mixture (89T1755). A mixture of 1 2 and two 1 1 adducts was obtained by [2 + 2] addition of but-2-yne in the absence of a solvent [87JFC(20)745]. 

Treatment of 1,2,4-triazines 91a-91e with the electron-deficient die-nophile dimethyl acetylenedicarboxylate gave products, depending on the substituents [77LA( 10) 1718]. Pyrrolo-[2, -/][ ,2,4]triazines 92 were obtained via [4 + 2]-cycloaddition [77LA(9)1413, 77LA( 10)1718] with 91, but interaction with 91b in the absence of solvent gave, in addition to 92, the pyrido[2,l-/][l,2,4]triazine 93 and [l,3]oxazino[2,3-/][l,2,4]-triazine 94. In case of 91a pyridine and benzene derivatives were also formed in addition to 92 (Scheme 23). 

The preparation of 5-ACETYL-l,2,3,4,5-PENTAMETHYLCYCLO-PENTADIENE is of value in the synthesis of pentamethyleyclo-pentadiene and many pentamethylcyclopentadienyl metal carbonyl derivatives that are more soluble in organic solvents than those derived from cyclopentadiene. Simple preparations of 5,6-DIHYDRO-2-PYRAN-2-0NE and 2-//-PYRAN-2-ONE make these hitherto rather inaccessible intermediates available for cycloaddition and other reactions. The already broad scope of the Michael reaction has been widened further by including an efficient preparation of ETHYL (E)-3-NITROACRYLATE. Workers in the field of heterocyclic chemistry will find a simplified method for the preparation of 2,3,4,5-TETRA-HYDROPYRIDINE of help. 

---