Sodium nitrite reduction

Plutonium Purification. The aqueous feed for the second plutonium cycle is typically prepared by adding HNO and an excess of sodium nitrite, NaN02, to destroy the excess reductant and oxidize the Pu to the more extractable Pu . An alternative approach which reduces the amount of salt in the Hquid waste involves absorbing nitrogen tetroxide, N2O4, as a substitute for the NaN02 ... 

Production is by the acetylation of 4-aminophenol. This can be achieved with acetic acid and acetic anhydride at 80°C (191), with acetic acid anhydride in pyridine at 100°C (192), with acetyl chloride and pyridine in toluene at 60°C (193), or by the action of ketene in alcohoHc suspension. 4-Hydroxyacetanihde also may be synthesized directiy from 4-nitrophenol The available reduction—acetylation systems include tin with acetic acid, hydrogenation over Pd—C in acetic anhydride, and hydrogenation over platinum in acetic acid (194,195). Other routes include rearrangement of 4-hydroxyacetophenone hydrazone with sodium nitrite in sulfuric acid and the electrolytic hydroxylation of acetanilide [103-84-4] (196). 

Sodium nitrite has been synthesized by a number of chemical reactions involving the reduction of sodium nitrate [7631-99-4] NaNO. These include exposure to heat, light, and ionizing radiation (2), addition of lead metal to fused sodium nitrate at 400—450°C (2), reaction of the nitrate in the presence of sodium ferrate and nitric oxide at - 400° C (2), contacting molten sodium nitrate with hydrogen (7), and electrolytic reduction of sodium nitrate in a cell having a cation-exchange membrane, rhodium-plated titanium anode, and lead cathode (8). 

Later, a completely different and more convenient synthesis of riboflavin and analogues was developed (34). It consists of the nitrosative cyclization of 6-(A/-D-ribityl-3,4-xyhdino)uracil (18), obtained from the condensation of A/-D-ribityl-3,4-xyhdine (11) and 6-chlorouracil (19), with excess sodium nitrite in acetic acid, or the cyclization of (18) with potassium nitrate in acetic in the presence of sulfuric acid, to give riboflavin-5-oxide (20) in high yield. Reduction with sodium dithionite gives (1). In another synthesis, 5-nitro-6-(A/-D-ribityl-3,4-xyhdino) uracil (21), prepared in situ from the condensation of 6-chloro-5-nitrouracil (22) with A/-D-ribityl-3,4-xyhdine (11), was hydrogenated over palladium on charcoal in acetic acid. The filtrate included 5-amino-6-(A/-D-ribityl-3,4-xyhdino)uracil (23) and was maintained at room temperature to precipitate (1) by autoxidation (35). These two pathways are suitable for the preparation of riboflavin analogues possessing several substituents (Fig. 4). 

ISodium nitroxylate can he prepared as a yellow solid hy reduction of sodium nitrite with Na/NH3(liq.) ... 

Bromo-6,7,8,9-tetrahydro-l//-3-benzazepin-2-amine(6) with thiocyanate ion undergoes substitution of bromide to give the thiocyanatotetrahydro-l//-3-benzazepine 7.105 Attempts to replace bromide by azide ion failed, as did diazotization of the amine group with sodium nitrite in 6 M sulfuric acid. Oddly, treatment of the aminobromo compound with sodium borohydride in methanol results not in reduction, but in methoxy-debromination to give the 2-methoxy derivative which, on the basis of HNMR spectral data, is best represented as the 2-imino tautomer 8. 

The specific detection of aromatic nitro compounds is a second example. These can be converted by reduction to primary amines, which are then diazotized and coupled to yield azo dyes (cf. reagent sequence Titanium(III) chloride — Bratton-Marshall reagent ). Sodium nitrite —naphthol reagent, diazotized sulfanilic acid and other reagents specific for amino groups (e.g. ninhydrin, fluorescamine, DOOB, NBD chloride [9]) can also be used in the second stage of the reaction (Fig. 21). 

The solid is very reactive towards air, moisture or carbon dioxide, and tends to explode readily, also decomposing violently on heating. It is produced from sodium nitrate or sodium nitrite by electrolytic reduction, or action of sodium. 

Figure 19.22 Phenolic compounds may be derivatized to contain reactive diazonium groups by nitration with tetranitromethane followed by reduction with sodium dithionite and diazotization with sodium nitrite in dilute HCI.

Azide 367 is prepared from 4-r -butyl-2-nitroaniline in 76% yield by its diazotization followed by treatment with sodium azide. In a 1,3-dipolar cycloaddition with cyanoacetamide, azide 367 is converted to triazole 368 that without separation is directly subjected to Dimroth rearrangement to give derivative 369 in 46% yield. Reduction of the nitro group provides ortfc-phenylenediamine 371 in 91% yield <2000EJM715>. Cyclocondensation of diamine 371 with phosgene furnishes benzimidazol-2-one 370 in 39% yield, whereas its reaction with sodium nitrite in 18% HC1 leads to benzotriazole derivative 372, which is isolated in 66% yield (Scheme 59). Products 370 and 372 exhibit potassium channel activating ability <2001FA841>. 

Subsequent to the checking of this preparation, the submitters reported that DM SO (dimethyl sulfoxide) may be a somewhat better solvent for this preparation than is DMF. Since sodium nitrite is more soluble in DMSO, only 250 ml. of this solvent is required for the preparation. The more concentrated solution permits a reduction in reaction time to about 1.5 hours. 

Finally, the methemoglobin reduction test may be briefly mentioned. The test has been developed for the detection of primaquine sensitivity and depends on the function of the G-6-PDH system. Its principle consists in the oxidation of Hb to MHb by sodium nitrite and the subsequent enzymatic reduction to Hb in presence of methylene blue. The activity of this system can be followed easily by observation of alterations in color after an incubation period or by means of MHb determinations before and after this period (B18). 

Principally the same, but chemically simpler, sequence was used to prepare arylnitro anion-radicals from arylamines, in high yields. For instance, aqueous sodium nitrite solution was added to a mixture of ascorbic acid and sodium 3,5-dibromo-4-aminobenzenesulfonate in water. After addition of aqueous sodium hydroxide solution, the cation-radical of sodium 3,5-dibromo-4-nitro-benzenesulfonate was formed in the solution. The latter was completely characterized by its ESR spectrum. Double functions of the nitrite and ascorbic acid in the reaction should be underlined. Nitrite takes part in diazotization of the starting amine and trapping of the phenyl a-radical formed after one-electron reduction of the intermediary diazo compound. Ascorbic acid produces acidity to the reaction solution (needed for diazotization) and plays the role of a reductant when the medium becomes alkaline. The method described was proposed for ESR analytical determination of nitrite ions in water solutions (Lagercrantz 1998). 

Baum and Archibald reported the synthesis of 2,2,6,6-tetranitrobicyclo[3.3.1]nonane (142). This synthesis starts from the dioxime (140), which on halogenation with chlorine, followed by oxidation with hypochlorite and reductive dehalogenation with hydrogen in the presence of palladium on carbon, yields 2,6-dinitrobicyclo[3.3.1]nonane (141). Oxidative nitration of (141) with sodium nitrite and silver nitrate under alkaline conditions yields 2,2,6,6-tetranitrobi-cyclo[3.3.1]nonane (142). The greater molecular freedom in 2,2,6,6-tetranitrobicyclo[3.3.1] nonane (crystal density-1.45 g/cm ) compared to the isomeric 2,2,6,6-tetranitroadamantane (crystal density-1.75 g/cm ) is reflected is their considerably different crystal densities. 

---