Sodium dodecyl sulfate interface

As an example, Tajima and co-workers [108] used labeling to obtain the adsorption of sodium dodecyl sulfate at the solution-air interface. The results, illustrated in Fig. Ill-12, agreed very well with the Gibbs equation in the form... 

Wanless E J and Ducker W A 1996 Organization of sodium dodecyl sulfate at the graphite-solution interface J. Phys. Chem. 100 3207-14... 

P 20] The reaction was carried out using ethylene glycol/water (60 40 wt.-%) and hydrogen [63, 66]. To stabilize the gas/liquid interface, sodium dodecyl sulfate was added as surfactant. By this means, a foam stable for at least 6 min at 60 °C was achieved. Bubbles of a typical size of 200 pm were formed. The liquid content in the foam amounted to 20%. 

Surfactants like sodium dodecyl sulfate reduce the surface tension at the liquid-gas interface considerably. In fact, the addition of surfactants in small... 

Bimetallic Au/Pd nanoparticles were prepared by ultrasound irradiation of a mixture solution of NaAuCl4-H20/PdCl2 2NaCl-3H20 by which the Au and Pd ions were reduced to the metallic state. The Mossbauer spectra of AuPd-SDS particles, with SDS (sodium dodecyl sulfate) representing the surfactant of the system, consist of two components, one for the pure Au core and the other for the alloy layer at the interface of Au core and Pd shell [435]. 

A further interesting application of CLM involves the fluorescence quenching reaction between (5,10,15,20-tetraphenylporphyrinato) zinc (II) and methylviologen at a dode-cane-water interface. [62] This study demonstrated that the quenching reaction could occur only in the presence of an anionic surfactant, sodium dodecyl sulfate (SDS). The quenching efficiency depended on the concentration of SDS in the aqueous phase with a maximum value of 13.5%... 

Recently, the newly developed time-resolved quasielastic laser scattering (QELS) has been applied to follow the changes in the surface tension of the nonpolarized water nitrobenzene interface upon the injection of cetyltrimethylammonium bromide [34] and sodium dodecyl sulfate [35] around or beyond their critical micelle concentrations. As a matter of fact, the method is based on the determination of the frequency of the thermally excited capillary waves at liquid-liquid interfaces. Since the capillary wave frequency is a function of the surface tension, and the change in the surface tension reflects the ion surface concentration, the QELS method allows us to observe the dynamic changes of the ITIES, such as the formation of monolayers of various surfactants [34]. 

G. Narsimham and P. Goel Drop Coalescence During Emulsion Eormation in a High-Pressure Homogenizer for Tetradecane-in-Water Emulsion Stahihzed hy Sodium Dodecyl Sulfate. J. Colloid Interface Sci. 238, 420 (2001). 

J. Lucassen, F. Hollway, and J.H. Buckingham Surface Properties of Mixed Solutions of Poly-Lysine and Sodium Dodecyl Sulfate. 2. Dynamic Surface Properties. J. Colloid Interface Sci. 67, 432 (1978). 

E. Staples, I. Tucker, J. Penfold, R.K. Thomas, and D.J.F. Taylor Organization of Polymer-Surfactant Mixtures at the Air-Water Interface Sodium Dodecyl Sulfate and Poly Dimethyldiallylammonium Chloride. Langmuir 18, 5147 (2002). 

Figure 8.6 Comparison of the influence of non-ionic Ci2E6 (hexaoxyethyl-ene ft-dodecyl ether) or anionic SDS (sodium dodecyl sulfate) on adsorbed amount of p-lactoglobulin at the air-water interface (0.1 wt% protein, pH = 6, ionic strength = 0.02 M, 25 °C) as determined by neutron reflectivity measurements. Protein surface concentration is plotted against the aqueous phase surfactant concentration ( ) Ci2E6 ( ) SDS. Reproduced from Dickinson (2001) with permission.

This paper describes a study of the dispersibility of Graphon (graphitized Spheron 6) in aqueous solutions of sodium dodecyl sulfate (SDS) an dodecyl trimethylammonium bromide (DTAB), and its relation to the adsorption behavior of the surfactants at the solid/liquid interface, with a view to determine the controlling process in the dispersibility of these systems. 

Figure D3.5.5 Equilibrium surface tension of sodium dodecyl sulfate (SDS) at the air-water interface as a function of surfactant concentration. The corresponding surface coverage was calculated using the Gibbs absorption equation (Eq. D3.5.26).

A hydrate nucleating agent (precipitated amorphous silica) and a quiescent surface inhibitor (sodium dodecyl sulfate) were used in an attempt to initiate hydrates in the bulk phase. While the induction time (for detectable hydrate formation) was not predictable, in every case hydrate was initiated at a surface—usually at the vapor-water interface, but infrequently along the sides of the sapphire tube in the gas phase, and at the metal end-plate below the liquid phase. 

J.C. Hoskins and A.D. King, Jr., The effect of n-pentanol on the solubility of ethane in micellar solutions of sodium dodecyl sulfate, J. Colloid Interface Sci. 82 (1981) 260-263. 

A predictive molecular thermodynamics approach is developed for microemulsions, to determine their structural and compositional characteristics [3.7]. The theory is built upon a molecular level model for the free energy change. For illustrative purposes, numerical calculations are performed for the system water, cyclohexane, sodium dodecyl sulfate as surfactant, pentanol as cosurfactant and NaCl as electrolyte. The droplet radius, the thickness of the surfactant layer at the interface, the number of molecules of various species in the droplets, and the distribution of the components between droplets and the continuous phase are calculated. The theory also predicts the transition from a mi-... 

In what follows, one considers for illustration purposes the case in which the charge is generated on the surface of colloidal particles or droplets by the adsorption of a surfactant, namely sodium dodecyl sulfate (SDS). We selected this case because information about the adsorption of SDS on an interface is available in the literature, and as it will become clearer later the number of parameters involved is smaller than in the case of silica. A more complex calculation about the silica and the amphoteric latex particles will be presented in a forthcoming paper. It involves several kinds of surface dipoles and equilibrium constants. 

Aqueous phase (2.7 mm3) was placed in the thin lower compartment of the microcell and the Dil dodecane solution (63 mm3) was added on top of the aqueous layer. Fluorescence of the interfacial Dil was observed in the range of 571-575 nm. The influence of two kinds of surfactants, sodium dodecyl sulfate (SDS) and dimyristoyl phosphatidylcholine (DMPC), on the lateral diffusion dynamics of single molecules at the interface was investigated. DMPC was dissolved in chloroform, and the solution was mixed with pure diethyl ether at a ratio of 1 19 (chloroform diethyl ether) by volume. Pure water was placed in the lower container, and the DMPC solution was subsequently (5 mm3) spread carefully on the water. After evaporation of chloroform and diethyl ether, the Dil dodecane solution was added on the DMPC layer. Since Dil has a high... 

Fang, J., and Venable, R. L. (1987), Conductivity study of the microemulsions system sodium dodecyl sulfate-hexylamine-heptane-water, /. Colloid Interface Sci, 116, 269-277. 

---