Silicates Silicate gels

Syneresis of sodium silicate gels may occur under some conditions, eg, in pure gels or coarse formations. Cement grouting should then precede chemical grouting. Leaching that results from dissolution under water-saturated conditions may be eliminated by use of proper reagent proportions. 

Liquid Water Linde Type 4 A Linde Type 5 A Activated Alumina Silicic Acid Gel... 

Siliceous gel zeolite A synthetic, inorganic exchanger produced by the aqueous reaction of alkali with aluminum salts. 

C (associated with various transition metals) Si Si02 (associated with Ti02) Aluminium silicate Silica gel as support or alone 1,2-Ethanediol Various alcohols and acids Various alcohols and acids Various alcohols and acids Terephthalic 129,130) 51,70) 124) 36,131, 134-137, 175)... 

One example is silicate cement where orthosilicic acid, chemically generated in solution, condenses to form a silicic acid gel. Another is refractory cement where a cementitious product is formed by the heat treatment of an acid orthophosphate, a process which again involves condensation to form a polyphosphate. 

The latter interpretation of data is more in accord with the recent Al and Si NMR findings of Ellison Warrens (1987), who found that the structure of an appreciable fraction of the glass changed under acid attack with some loss of aluminium including all in fivefold coordination (see Section 5.9.2). Thus, acid attack was not entirely confined to the surface layer of a glass particle. If this is so then silicic acid as well as ions must migrate from the body of the particle and it is reasonable to suppose that silicic acid deposits as siliceous gel at the particle-matrix interface. 

The picture of cement microstructure that now emerges is of particles of partially degraded glass embedded in a matrix of calcium and aluminium polyalkenoates and sheathed in a layer of siliceous gel probably formed just outside the particle boundary. This structure (shown in Figure 5.17) was first proposed by Wilson Prosser (1982, 1984) and has since been confirmed by recent electron microscopic studies by Swift Dogan (1990) and Hatton Brook (1992). The latter used transmission electron microscopy with high resolution to confirm this model without ambiguity. 

The form of silica in the matrix is at present unknown. In the freshly prepared cement there are appreciable amounts of silicic acid present which decline as the cement ages (Crisp, Lewis Wilson, 1976d). In the set cement silica could be present as a polymeric silicic acid, a siliceous gel or even a hydrated silicate gel, such as the tobermorite gel present in Portland cements (Taylor, 1966). 

The nature of the setting reaction was finally elucidated by Wilson et al. (1970a), who established that formation of an aluminium phosphate gel was responsible although siliceous gel was also formed it merely coated the partly reacted glass particles. 

In the late 1940s zeolites were synthesized according to the procedure shown in Fig. 3.24. First an amorphous alumino-silicate gel is formed. This process is completely analogous to the production of alumina and silica gels described before. Subsequently this gel is crystallized into zeolite. The preparation of zeolites has drawn tremendous attention of the scientific and industrial community. A wide variety of zeolites have been synthesized, and reproducible synthesis procedures have been reported (often in the patent literature). Natural zeolites also exist massive deposits have been discovered in many places in the world. 

Silicate gel enhances the sweep efficiency of a waterflood, gasflood, or steamflood operation by reducing the permeability of the high-permeability zones. Weak acids may be added to control gel generation rate [377]. 

Figure 6. Raman spectra of silicates silica gel dried at 50°C, heated to 600°C, consolidated at 1100°C, and conventionally prepared fused silica.

Heichalsegal, O., Rappoport, S. and Braun, S. (1995) Immobilization in alginate-silicate sol-gel matrix protects beta-glucosidase against thermal and chemical denaturation. Biotechnology, 13, 798-800. 

Chen, J.P. and Wang, H.Y. (1998) Improved properties of bilirubin oxidase by entrapment in an alginate-silicate sol-gel matrix. Biotechnology Techniques, 12, 851-853. 

J.P. Li, T.Z. Peng, and Y.Q. Peng, A cholesterol biosensor based on entrapment of cholesterol oxidase in a silicic sol-gel matrix at a Prussian blue modified electrode. Electroanalysis 15, 1031—1037 (2003). 

D.T. Nguyen, M. Smit, B. Dunn, and J.I. Zink, Stabilization of creatine kinase encapsulated in silicate sol-gel materials and unusual temperature effects on its activity. Chem. Mater. 14, 4300-4308 (2002). 

Role of alkali and NH cations in the crystallization of ZSM-5 Introduced in an aqueous (alumino) silicate gel (sol), the bare alkali cations will behave in various ways firstly, they will interact with water dipoles and increase the (super) saturation of the sol. Secondly, once hydrated, they will interact with the aluminosilicate anions with, as a result, the precipitation of the so formed gel (salting-out effect). Thirdly, if sufficiently small, they also can order the structural subunits precursors to nucleation species of various zeolites (template function-fulfilled by hydrated Na+ in the case of ZSM-5 (11,48)). ... 

In this procedure the soil sample (spiked with isotopic marker compounds) is processed in a two-part enrichment procedure (Fig. 5.3). In part I, a mixture of the sample and sodium sulphate is subject to solvent extraction, and the extract is, in the same process, passed through a series of silica-based adsorbents and then through the carbon/glass fibre adsorbent. The extract passes through the adsorbents in the following order potassium silicate, silica gel, cesium or potassium silicate, silica gel and finally an activated-carbon... 

Other nanocomposite CNT electrodes have been reported by mixing CNTs with granular Teflon [48], chistosan [110], polystyrene [111], polysulfone [112] and epoxy [103, 113] or by incorporating them into a silicate gel matrix [13, 114]. 

In the presence of calcium lignosulfonate [58], the calcium silicate hydrate gel from the C3S and C2S... 

Similarly, the iminodithiocarbonate 72 serves as a thio nitrile ylide synthon (38). When treated with fluoride ion in the presence of aldehydes and ketones, it gave the alcohols 73 as isolable products that were converted into 74 on treatment with silical gel. Best results were obtained with aromatic aldehydes containing electron-withdrawing groups yields were poorer when electron-donating groups were present and for ketones. 

Del Nero, M., Advocat, T., Jollivet, P. Bontems, G. 1999b. Sorption of neptunium (V) on an alteration gel of alumino-borosilicate glasses and on synthetic silicate gels. Proceedings 2nd International Symposium on Nuclear Fuel Cycle Safety Engineering Research Facility NUCEF 98, Hitachinaka, Ibaraki, Japan, 584-595. 

---