Secondary breakup effect

The substantial effect of secondary breakup of droplets on the final droplet size distributions in sprays has been reported by many researchers, particularly for overheated hydrocarbon fuel sprays. 557 A quantitative analysis of the secondary breakup process must deal with the aerodynamic effects caused by the flow around each individual, moving droplet, introducing additional difficulty in theoretical treatment. Aslanov and Shamshev 557 presented an elementary mathematical model of this highly transient phenomenon, formulated on the basis of the theory of hydrodynamic instability on the droplet-gas interface. The model and approach may be used to make estimations of the range of droplet sizes and to calculate droplet breakup in high-speed flows behind shock waves, characteristic of detonation spray processes. 

Chiappetta, L. M. 2001. Tests of a comprehensive model for ciirblast atomizers including the effects of spray initialization (primary atomization), secondary breakup, collision and coalescence. UTRC Report. 

An attempt has been made by Tsouris and Tavlarides[5611 to improve previous models for breakup and coalescence of droplets in turbulent dispersions based on existing frameworks and recent advances. In both the breakup and coalescence models, two-step mecha-nisms were considered. A droplet breakup function was introduced as a product of droplet-eddy collision frequency and breakup efficiency that reflect the energetics of turbulent liquid-liquid dispersions. Similarly, a coalescencefunction was defined as a product of droplet-droplet collision frequency and coalescence efficiency. The existing coalescence efficiency model was modified to account for the effects of film drainage on droplets with partially mobile interfaces. A probability density function for secondary droplets was also proposed on the basis of the energy requirements for the formation of secondary droplets. These models eliminated several inconsistencies in previous studies, and are applicable to dense dispersions. 

Hybrid techniques such as corrugating the cone with secondary suction and coating can achieve successful decoupling at higher frequencies, thereby minimizing node flexure. Nonetheless, some degree of node flexure is evident in most direct radiators. Extreme examples are shown in Fig. 3.59 (Berwick, 1994, 49) that illustrate the deleterious effects of such uniform piston breakup. 

---