Saturation tables

Values converted and mostly rounded off from those of Goodwin, NBSIR 77-860, 1977. t = triple point c = critical point. The notation 3.O.—9 signifies 3.0 X 10 . Later tables for the same temperature range for saturation and for the superheat state from 0.1 to 1000 har, 85.5 to 600 K, were published by Younglove, B. A. and J. F. Ely, J. Fhys. Chem. Ref. Data, 16, 4 (1987) 685-721, but the lower temperature saturation tables contain some errors. 

The 1993 ASHRAE Handbook—Fundamentals (SI ed.) gives a saturation table from —100 to 25.92 C and an enthalpy-log-pressure diagram from 0.1 to 80 har, —100 to 280 C. Equations and constants approximated to the 1985 ASHRAE tables are given bv Mecarvk, K. and M. Masaryk, Heat Recovety Sustems and CHF, 11,... 

Saturation tables Tables that relate the dryness properties of a gas to its temperature and pressure. 

Treatment of the culture filtrate with increasing ammonium sulfate amounts showed that the bulk of polygalacturonase activity precipitates between 45 and 85 % ammonium sulfate saturation (Table 1). 

Flow Tests. One foot long sand packs using Wilmington oil field unconsolidated sand were prepared for each of the flow tests. Porosity and permeability of all the sand packs were within 30-35% and 100-300 md, respectively. All core packs were evacuated to about 1 mm of mercury (Hg) before saturating them under gravity to assure complete water saturation. Table III gives the core and fluid properties for the flow tests. The properties of the cores were chosen so that they are close to the field conditions reported by Krebs(15). 

The partition index (IR, which will be discussed in details below) of Cd, Cu, Cr, Ni and Zn in both soils rapidly increased from time zero (calculated value) to one day and further to one year. This was especially true for Cr, Cu and to some extent Ni and Cd (Table 6.5). This result indicates that added trace metals are initially and rapidly transferred from the labile EXC fraction into the more stable fractions. Furthermore, IR of trace metals in native arid soils incubated under the saturated paste regime decreased at the end of year. This indicates mobilization of trace elements in these soils as saturation (Table 6.5). Also, it can be seen that IR decreased, for any given time, with an increase of the loading level (Table 6.5, Fig. 6.5). This means that higher additions of soluble metals result in higher metal content in the labile fractions and lower metal binding intensity in soils. 

Fractionation conditions are expressed as % saturation . Table 8.19 and 8.20 give the amount of sohd ammonium sulfate necessary to get a distinct degree of saturation starting from a certain starting saturation. 

Solid bodies dissolved in water or other liquida produce, to a certain extent, the same effect as high pressure generally, the elevation of the boiling point varies according to the nature of the substance in solution, but it uniformly increases with the same body till the liquid is saturated. Tables founded upon this law have been drawn up, for the purpose of estimating the amount of saline matter in a liquid from its boiling point. 

The most interesting structural feature is the extremely short terminal Nd-N distance of 2167(2) A, which resembles Ln-O bond lengths [18]. This cannot be explained in terms of a double bond . However, as a common feature in all aforementioned Ln-NiPr2 complexes, close Ln---C interactions play a crucial part on steric saturation (Table 3). In Nd(NiPr)2(Me)(AlMe3)2 a Ln - C contact of 2934(2) A could be observed. For comparison M(NiPr2)3 (M = Al, Cr) do not show close Ln---C contacts [85]. 

---