Ruthenium thermal properties

Ruthenium see also Elements electrical resistivity, 12-39 to 40 electron configuration, 1-18 to 19 heat capacity, 4-135 history, occurrence, uses, 4-1 to 42 ionization energy, 10-203 to 205 isotopes and their properties, 11-56 to 253 magnetic susceptibility, 4-142 to 147 molten, density, 4-139 to 141 physical properties, 4-133 to 134 thermal properties, 12-201 to 202 vapor pressure, 6-61 to 90 vapor pressure, high temperature, 4-136 to 137... 

The layer of titanium and ruthenium oxides usually is applied to a titanium substrate pyrolytically, by thermal decomposition (at a temperature of about 450°C) of an aqueous or alcoholic solution of the chlorides or of complex compounds of titanium and rathenium. The optimum layer composition corresponds to 25 to 30 atom % of ruthenium. The layer contains some quantity of chlorine its composition can be written as Ruq 2sTio 750(2- c)Cl r At this deposition temperature and Ru-Ti ratio, the layer is a poorly ordered solid solution of the dioxides of ruthenium and titanium. Chlorine is completely eliminated from the layer when this is formed at higher temperatures (up to 800°C), and the solid solution decomposes into two independent phases of titanium dioxide and ruthenium dioxide no longer exhibiting the unique catalytic properties. 

Loss of Coordinated Arene. We previously stated that the arene ligand in ruthenium(II)-arene complexes is relatively inert towards displacement under physiological conditions. While this is generally true, there are a few exceptions to this rule and this type of reactivity can be used to advantage. Weakly bound arenes, for instance, can be thermally displaced, a property convenient for the synthesis of ruthenium-arene complexes that are not readily available through more common synthetic routes. This way, the reaction of a precursor dimer, [RuCl2(etb)]2 (etb, ethylbenzoate) (68), with either 3-phenyl-1-propylamine or... 

Using nitrile oxides, various compounds and materials possessing valuable properties have been prepared. Among them are thin-film resistors useful for a thermal head and comprising a nitrile oxide, ruthenium and oxygen, a method for manufacturing the resistor by coating or deposition (529), isoxazole and/or isoxazoline polyheterocyclic systems like 458, which are useful for development of a new class of ionophores (530). 

The ruthenium(II) polypyridyl complexes are also popular but the brightnesses do not exceed 15,000 and thermal quenching is rather significant. This property can be utilized to design temperature-sensitive probes providing that the dyes are effectively shielded from oxygen (e.g., in polyacrylonitrile beads). Despite often very high emission quantum yields the visible absorption of cyclometallated complexes of iridium(III) and platinum(II) is usually poor (e < 10,000 M-1cm-1), thus,... 

Ti02 and Z1O2 aerogels were successfully employed as supports for ruthenium supported catalysts. These catalysts were found to be very active for wet air oxidation of p-HBZ acid. Furthermore, the use of nitric acid as hydrolysis agent and Ru(N0)(N03)3 as metal precursor leads to the more efficient catalyst. When these conditions were used, ZrOa enhances the catalytic properties of the ruthenium phase. This result points out the important role of the support on the properties of the dispersed metal phase. Further investigations to improve BET surface area and thermal stability of the support are in progress. 

Ruthenium has always been considered as one of the most active catalysts for several reactions of commercial and environmental importance. In early seventies, ruthenium was studied for its possible application as a de-NOx catalyst for automobiles. Its volatile nature in oxide form was soon realized and efforts were directed to stabilize ruthenium, without much affecting its catalytic properties. Attempts were also made towards synthesis of mthenium based perovskite t3 e and other mixed oxide compositions, as the incorporation of ruthenium in perovskite structure can substantially improve its thermal stability... 

It should be noted that the exact cation stoichiometry of the product is highly sensitive to the exact metal concentration of the ruthenium source solution and temperature and pH of the reaction medium (inadvertent increases in both of these parameters lead to increased solubility of lead in the alkaline reaction medium and consequently yield solid products of lower lead ruthenium ratios). While synthesis of a pure lead ruthenium oxide pyrochlore is relatively easy, the precise cation stoichiometry of the product is a property that is not always easy to control. A relatively quick check on the cation stoichiometry of the lead ruthenium oxide product can be obtained, however, by using the correlation between lattice parameter and composition that is displayed in Fig. 1. When lattice parameter and cation stoichiometry are independently determined, the relationship shown in Fig. 1 also provides an assessment of product purity since data points that show significant departures from the displayed linear correlation indicate the presence of impurity phases. The thermal stability of the lead ruthenium oxides decreases with increasing occupancy of tetravalent lead on the octahedrally coordinated site, but all of the ruthenium oxide pyro-chlores described are stable to at least 350° in oxygen. 

---