Ruthenium complexes bromides

Binary Compounds. The mthenium fluorides are RuF [51621 -05-7] RuF [71500-16-8] tetrameric (RuF ) [14521 -18-7] (15), and RuF [13693-087-8]. The chlorides of mthenium are RUCI2 [13465-51-5] an insoluble RuCl [10049-08-8] which exists in an a- and p-form, mthenium trichloride ttihydrate [13815-94-6], RuCl3-3H2 0, and RuCl [13465-52-6]. Commercial RuCl3-3H2 0 has a variable composition, consisting of a mixture of chloro, 0x0, hydroxo, and often nitrosyl complexes. The overall mthenium oxidation state is closer to +4 than +3. It is a water-soluble source of mthenium, and is used widely as a starting material. Ruthenium forms bromides, RuBr2 [59201-36-4] and RuBr [14014-88-1], and an iodide, Rul [13896-65-6]. 

The preparation of the catalyst starts with the synthesis of 1-mes-ityl-3-(7-octene)-imidazole bromide. This compound is prepared by condensing mesityl imidazole with 8-bromooctene. The resulting salt is deprotonated with (TMS)2NK, where TMS is the tetrameth-ylsilyl radical. This step is performed in tetrahydrofuran at -30°C for 30 min. To this product a solution of the ruthenium complex (PCy3)2Cl2Ru=CHPh is added at 0°C. Bringing the solution slowly to room temperature, after 1 h the ligand displacement was determined to be complete. Afterwards, the reaction mixture is then diluted with n-pentane and heated to reflux for 2 h to induce intramolecular cyclization. 

Many ruthenium complexes have been tested in the silylative coupling reaction. In the synthetic procedure the absence of by-products of the homocoupling of vinylsilanes is required so an excess of the olefin has usually been used. However, the screening tests performed at the 1 1 ratio of styrene and phenyldimethylvinylsilane with a variety of ruthenium catalysts have shown that pentacoordinated monocarbonyl bisphosphine complexes appear to be the most active and selective catalysts of which RuHCl(CO)(PCy3)2 has shown high catalytic activity under conditions of catalyst loadings as low as 0.05 mol % [55]. Cuprous salts (chloride, bromide) have recently been reported to be very successful co-catalysts of ruthenium phosphine complexes, markedly increasing the rate and selectivities of all ruthenium phosphine complexes [54]. 

Wacker oxidation. The oxidation of 1-alkcnes to methyl ketones by oxygen catalyzed by PdCk and CuCU can be carried out under phase-transfer conditions with cetyltrimethylammonium bromide or a closely related salt as the phase-transfer catalyst. Yields are in the range 50-75%. Several rhodium and ruthenium complexes can be used as the metal catalyst, but the yields are lower. 

Substituted benzaldehydes, with a formyl substituent as directing group, were selectively arylated at their ortho-position with aryl bromides as electrophiles in the presence of palladium(O) catalysts [50]. The use of a ruthenium complexes within a cooperative multi-catalytic system [51] altered the chemoselectivity dramatically [52]. Thus, reactions of 8-formylquinoline (39) with iodoarenes proceeded regioselectivity at the formyl group itself to give the corresponding ketones in moderate to very good yields (Scheme 9.15) [52],... 

A significantly more active catalytic system was recently reported, with a ruthenium complex generated from carboxylic acid 75. This allowed for direct arylations to occur also in apolar solvents likely via a concerted metalation-deprotonation mechanism (CMD) and set the stage for the use of aryl bromides, chlorides, and tosylates as electrophilic substrates (Scheme 9.26) [64],... 

Although isomerization of alkenes occurs simultaneously with the oxidation, rhodium and ruthenium complexes can also be used instead of palladium for the oxidation of terminal alkene [15]. With these catalysts, symmetrical quaternary ammonium salts such as tetrabutylammonium hydrogensulfate are effective. Interestingly, the rate of palladium-catalyzed oxidation of terminal alkenes can be improved by using poly(ethylene glycol) (PEG) instead of quaternary ammonium salts [16]. Thus, the rates of PEG-400-induced oxidation of 1-decene are up three times faster than those observed with cetyltrimethylammonium bromide under the same conditions. Interestingly, internal alkenes can be efficiently oxidized in this polyethylene glycol/water mixture. 

The model that we take into account has been firstly proposed by H. J. Krug and coworkers in 1990 [30], to properly account for the photochemically-induced production of inhibitor bromide in the Belousov-Zhabotinsky reaction (BZ) catalyzed with the ruthenium complex Ru(bpy)3 [31, 32]. The Oregonator model was proposed in 1974 [16] on the basis Tyson-Fife reduction of the more complicated Field-Koros-Noyes mechanism [15] for the BZ reaction, the following modified model has been derived ... 

The viologen reduction by EDTA in reverse micelles in the presence of Ru(bpy)3 is another example of vectorial photoinduced electron transfer [106], The accumulation of photoproducts is associated with the catalytic cycles depicted in Fig. 10(b). The oxidative quenching of the ruthenium complex occurs at the micelle outer boundary, while the regeneration of the dye takes place by the oxidation of EDTA in the inner core of the micelle. The reduction of the final product 4-dimethylaminoazobenzene is further mediated by the acceptor 1-benzylnicotinamide (BNA ). In Fig. 10(c), the photocatalytic reduction of methyl benzoylformate (MBF) by thiosulfate is described in the presence of the porphyrin ZnTPPS and the mediator quinolinium-3-carboxiamide (DCA ) [107]. This sequence of reactions occurs only in micelles such as those formed by hexadecyl-trimethylammonium bromide, which contain in the interior the ultimate donor acceptor. Finder illumination, ZnTPPS photoreduces DCA to DCQ, which is subsequently extracted into the micelle core. Within the microenvironment, DCA is regenerated via reduction of MBF, while the oxidized porphyrin is reduced by thiosulfate outside the micelle. 

As carboxylic acid additives increased the efficiency of palladium catalysts in direct arylations through a cooperative deprotonation/metallation mechanism (see Chapter 11) [45], their application to ruthenium catalysis was tested. Thus, it was found that a ruthenium complex modified with carboxylic acid MesC02H (96) displayed a broad scope and allowed for the efficient directed arylation of triazoles, pyridines, pyrazoles or oxazolines [44, 46). With respect to the electrophile, aryl bromides, chlorides and tosylates, including ortho-substituted derivatives, were found to be viable substrates. It should be noted here that these direct arylations could be performed at a lower reaction temperatures of 80 °C (Scheme 9.34). 

The conversion of aryl triflates into vinyl bromides used a ruthenium complex bearing a bulky cyclopentadienyl ligand to catalyze the reaction (Scheme 7.109) [151]. A slight... 

Palladium complexes have been shown to promote this reaction using nucleophilic sources of the bromide or chloride [150]. Ruthenium complexes have also been active towards this reaction [151]... 

---