Rubber material styrene-butadiene matrix

For hydrophobic elastomers such as NR and styrene butadiene rubber, carbon black usually has been selected as filler due to the hydrophobic surface characteristics and special particle shapes of carbon black which provide good dispersion. However, the dispersion of polar filler in hydro-phobic rubbers matrix is difficult because of its hydrophilic surface. The hydroxyl groups exist on the surface of polar filler provide strong filler-filler interactions which resulted in poor filler dispersion. The polar surface of filler formed hydrogen bonds with polar materials in a rubber compound. As known, the silica surface is acidic and forms strong hydrogen bonds with basic materials. ... 

At the same time, Peddini et al. described the preparation of nanocomposites from styrene-butadiene mbber (SBR) and multiwall carbon nanotubes (MWCNT). MWCNT are important nanostructures due to the exceptionally high modulus and aspect ratios there has been much interest in using them as reinforcing agents for polymer composites. Styrene-butadiene rubber (SBR), commonly used as a tread stock for tires, is employed here as the matrix for creation of a masterbatch with oxidized MWCNT (12.3-15 wt%). These materials do not show a high level of electrical conductivity as might be expected from a percolation concept, signifying excellent tube dispersion and formation of a bound rubber layer on the discrete MWCNT [126]. 

The term ABS was originally used as a general term to describe various blends and copolymers containing acrylonitrile, butadiene and styrene. Prominent among the earliest materials were physical blends of acrylonitrile-styrene copolymers (SAN) (which are glassy) and acrylonitrile-butadiene copolymers (which are rubbery). Such materials are now obsolete but are referred to briefly below, as Type 1 materials, since they do illustrate some basic principles. Today the term ABS usually refers to a product consisting of discrete cross-linked polybutadiene rubber particles that are grafted with SAN and embedded in a SAN matrix. 

Another major use of butadiene polymer is in the manufacture of HIPS. Most HIPS has about 4%i-12%i polybutadiene in it so that HIPS is mainly a PS-intense material. Here, the polybutadiene polymer is dissolved in a liquid along with styrene monomer. The polymerization process is unusual in that both a matrix composition of PS and polybutadiene is formed as well as a graft between the growing PS onto the polybutadiene is formed. The grafting provides the needed compatibility between the matrix phase and the rubber phase. The grafting is also important in determining the structure and size of rubber particles that... 

ABS Three-component copolymer of acrylonitrile, butadiene, and styrene, alloy Rubber-toughened materials in which the matrix can be a mixture of polymer tyrpes. alternation copolymer Ordered copolymer in which every other building is a different mer. azeotropic copolymer Copolymer in which the feet and composition of the copolymer are the same, blends Mixtures of different polymers on a molecular level may exist in one or two phases, block copolymer Copolymer that contains long sequences or runs of one mer or both mers. 

Acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acry- late (ASA) are rubber-toughened plastics based upon the styrene-acrylonitrile (SAN) copolymer matrix. The combination of the stiffness and toughness exhibited by these materials has made them increasingly attractive in engineering applications, and the activity of the patent literature testifies to a continuing interest in improving properties through modifications of structure. The aim of this paper is to discuss a quantitative approach to structure-property relationships in ABS and ASA polymers. 

Other Impact-Modified Commercial Grafting-Based Polymers Typical HIPS and ABS polymers are opaque materials however, MABS (methyl methacrylate-acrylonitrile-butadiene-styrene) polymers, which are produced by processes similar to those used in the production of ABS, are transparent materials. This property is obtained by the addition of methyl methacrylate (MMA) to the recipe in order to impart transparency to the polymer by equalizing the refracting index of the rubber particles to that of the matrix. These materials find applications... 

Acrylonitrile-styrene-acrylate (ASA) copolymers is another family of graft-copolymer-based materials in which the rubber phase is really a copolymer of butyl acrylate (BuA) and butadiene (at least in some recipes) [47, 48], and the matrix is made of a SAN copolymer. Originally, butadiene was not present in the rubber phase [49] and perhaps those were not really graft-copolymer-based materials. The main advantage of ASA over ABS is its increased UV stability and long-term heat resistance due to the lack of residual double bonds in the acrylate part of the rubber. 

---