Rhodium intramolecular

There are several examples of intramolecular reactions of monocyclic /3-lactams with carbenes or carbenoids most of these involve formation of olivanic acid or clavulanic acid derivatives. Thus treatment of the diazo compound (106) with rhodium(II) acetate in benzene under reflux gives (107), an intermediate in the synthesis of thienamycin (80H(14)1305, 80TL2783). 

Intermediate 37 can be transformed into ( )-thienamycin [( )-1)] through a sequence of reactions nearly identical to that presented in Scheme 3 (see 22— 1). Thus, exposure of /(-keto ester 37 to tosyl azide and triethylamine results in the facile formation of pure, crystalline diazo keto ester 4 in 65 % yield from 36 (see Scheme 5). Rhodium(n) acetate catalyzed decomposition of 4, followed by intramolecular insertion of the resultant carbene 3 into the proximal N-H bond, affords [3.2.0] bicyclic keto ester 2. Without purification, 2 is converted into enol phosphate 42 and thence into vinyl sulfide 23 (76% yield from 4).18 Finally, catalytic hydrogenation of 23 proceeds smoothly (90%) to afford ( )-thienamycin... 

Secondary amines can be added to certain nonactivated alkenes if palladium(II) complexes are used as catalysts The complexation lowers the electron density of the double bond, facilitating nucleophilic attack. Markovnikov orientation is observed and the addition is anti An intramolecular addition to an alkyne unit in the presence of a palladium compound, generated a tetrahydropyridine, and a related addition to an allene is known.Amines add to allenes in the presence of a catalytic amount of CuBr " or palladium compounds.Molybdenum complexes have also been used in the addition of aniline to alkenes. Reduction of nitro compounds in the presence of rhodium catalysts, in the presence of alkenes, CO and H2, leads to an amine unit adding to the alkene moiety. An intramolecular addition of an amine unit to an alkene to form a pyrrolidine was reported using a lanthanide reagent. 

The Rh and Ir complexes 85-88 (Fig. 2.14) have been tested for the intramolecular hydroamination/cyclisation of 4-pentyn-l-amine to 2-methyl-1-pyrroline (n = 1). The reactions were carried out at 60°C (1-1.5 mol%) in THF or CDCI3 The analogous rhodium systems were more active. Furthermore, the activity of 87 is higher than 85 under the same conditions, which was attributed to the hemilabihty of the P donor in the former complex, or to differences in the trans-eSects of the phosphine and NHC ligands, which may increase the lability of the coordinated CO in the pre-catalyst [75,76]. 

Fig. 2.14 Rhodium and iridium cataiysts for the intramolecular hydroamination of alkynes...

Diene-ynes 160 undergo an intramolecular [4+2] Diels-Alder reaction in the presence of two different NHC-Rh catalysts (Scheme 5.42) [48], Catalysts 162 [48a] and 163 [48b] were used in small amounts (1 mol% and 2 mol%, respectively) and the products 161 were obtained in excellent yield under mild conditions. Shorter reaction rates were observed when compared with reaction catalysed by phosphine-based rhodium catalysts. 

McKervey and Ye have developed chiral sulfur-containing dirhodium car-boxylates that have been subsequently employed as catalysts for asymmetric intramolecular C-H insertion reactions of y-alkoxy-ot-diazo-p-keto esters. These reactions produced the corresponding ci -2,5-disubstituted-3(2H)-furanones with diastereoselectivities of up to 47% de. Moreover, when a chiral y-alkoxy-a-diazo-p-keto ester containing the menthyl group as a chiral auxiliary was combined with rhodium(II) benzenesulfoneprolinate catalyst, a considerable diastereoselectivity enhancement was achieved with the de value being more than 60% (Scheme 10.74). 

In contrast to the intramolecular carbenoid C-H insertion, the inter-molecular version has not been greatly developed and has been for a long time regarded as a rather inefficient and unselective process. In this context, Davies and Hansen have developed asymmetric intermolecular carbenoid C H insertions catalysed by rhodium(II) (5 )-A-(p-dodecylphenyl)sulfonylprolinate. " Therefore, these catalysts were found to induce asymmetric induction in the decomposition of aryldiazoacetates performed in the presence of cycloalkanes,... 

Rhodium catalysis have been used for formation of ylides by intramolecular reactions. 

Several of the copper and rhodium catalysts were compared in an intramolecular cyclopropanation.210 For the reaction leading to formation of a 10-membered ring, shown below, the copper catalysts gave higher enantioselectivity, but there were many subtleties, depending on ring size and other structural features in related systems. 

Rhodium carboxylates have been found to be effective catalysts for intramolecular C—H insertion reactions of a-diazo ketones and esters.215 In flexible systems, five-membered rings are formed in preference to six-membered ones. Insertion into methine hydrogen is preferred to a methylene hydrogen. Intramolecular insertion can be competitive with intramolecular addition. Product ratios can to some extent be controlled by the specific rhodium catalyst that is used.216 In the example shown, insertion is the exclusive reaction with Rh2(02CC4F9)4, whereas only addition occurs with Rh2(caprolactamate)4, which indicates that the more electrophilic carbenoids favor insertion. 

Rhodium catalysis in an aqueous-organic biphasic system was highly effective for intramolecular [2+2+2] cyclotrimerization. It has been shown that the use of a biphasic system could control the concentration of an organic hydrophobic substrate in the aqueous phase, thus increasing the reaction selectivity. The intramolecular cyclization for... 

Oshima et al. explored a cationic rhodium-catalyzed intramolecular [4+2] annulation of l,3-dien-8-ynes in water in the presence of sodium dodecyl sulfate (SDS), an anionic surfactant.132 When the substrate l,3-dien-8-yne was a terminal alkyne, the reaction provided an inter-molecular [2+2+2] product (Eq. 4.68). In water, a reactive cationic rhodium species was formed by the dissociation of the Rh-Cl bond in the presence of SDS. The SDS forms negatively charged micelles, which would concentrate the cationic rhodium species (Scheme 4.15). 

There are two important rhodium-catalyzed transformations that are broadly used in domino processes as the primary step. The first route is the formation of keto carbenoids by treatment of diazo keto compounds with Rh11 salts. This is then followed by the generation of a 1,3-dipole by an intramolecular cyclization of the keto carbenoid onto an oxygen atom of a neighboring keto group and an inter- or intramolecular 1,3-dipolar cycloaddition. A noteworthy point here is that the insertion can also take place onto carbonyl groups of aldehydes, esters, and amides. Moreover, cycloadditions of Rh-carbenes and ring chain isomerizations will also be discussed in this section. 

Diazo compounds 107 were heated to reflux in the presence of a rhodium catalyst giving rise to the carbene followed by intramolecular cyclization to give the diastereomeric pairs of ylides 5 and 108 (Equation 22) <2006T1459>. 

Products of a so-called vinylogous Wolff rearrangement (see Sect. 9) rather than products of intramolecular cyclopropanation are generally obtained from P,y-unsaturated diazoketones I93), the formation of tricyclo[2,1.0.02 5]pentan-3-ones from 2-diazo-l-(cyclopropene-3-yl)-l-ethanones being a notable exception (see Table 10 and reference 12)). The use of Cu(OTf), does not change this situation for diazoketone 185 in the presence of an alcoholl93). With Cu(OTf)2 in nitromethane, on the other hand, A3-hydrinden-2-one 186 is formed 160). As 186 also results from the BF3 Et20-catalyzed reaction in similar yield, proton catalysis in the Cu(OTf)2-catalyzed reaction cannot be excluded, but electrophilic attack of the metal carbene on the double bond (Scheme 26) is also possible. That Rh2(OAc)4 is less efficient for the production of 186, would support the latter explanation, as the rhodium carbenes rank as less electrophilic than copper carbenes. 

The view has been expressed that a primarily formed ylide may be responsible for both the insertion and the cyclopropanation products 230 246,249). In fact, ylide 263 rearranges intramolecularly to the 2-thienylmalonate at the temperature applied for the Cul P(OEt)3 catalyzed reaction between thiophene and the diazomalonic ester 250) this readily accounts for the different outcome of the latter reaction and the Rh2(OAc)4-catalyzed reaction at room temperature. Alternatively, it was found that 2,5-dichlorothiophenium bis(methoxycarbonyl)methanide, in the presence of copper or rhodium catalysts, undergoes typical carben(oid) reactions intermole-cularly 251,252) whether this has any bearing on the formation of 262 or 265, is not known, however. 

The use of rhodium(II) acetate in carbenoid chemistry has also been extended to promoting intramolecular C/H insertion reactions of ketocarbenoids 277,280,280 ,). From the a-diazo-P-ketoester 305, highly functionalized cyclopentane 306 could thus be constructed in acceptable yields by regiospecific insertion into an unactivated... 

Similar to the intramolecular insertion into an unactivated C—H bond, the intermolecular version of this reaction meets with greatly improved yields when rhodium carbenes are involved. For the insertion of an alkoxycarbonylcarbene fragment into C—H bonds of acyclic alkanes and cycloalkanes, rhodium(II) perfluorocarb-oxylates 286), rhodium(II) pivalate or some other carboxylates 287,288 and rhodium-(III) porphyrins 287 > proved to be well suited (Tables 19 and 20). In the era of copper catalysts, this reaction type ranked as a quite uncommon process 14), mainly because the yields were low, even in the absence of other functional groups in the substrate which would be more susceptible to carbenoid attack. For example, CuS04(CuCl)-catalyzed decomposition of ethyl diazoacetate in a large excess of cyclohexane was reported to give 24% (15%) of C/H insertion, but 40% (61 %) of the two carbene dimers 289). 

Wolff rearrangement of a-diazoketones to give ketenes or subsequent products is an often used synthetic procedure the scope and limitations of which are well established 13 390), so that only a few new features of this reaction need to be considered here. Concerning its catalytic version, one knows that copper, rhodium and palladium catalysts tend to suppress the rearrangement390). A recent case to the contrary is provided by the Rh2(OAc)4-catalyzed decomposition of ethyl -2-diazo-3-oxopent-4-enoates 404 from which the p,y-unsaturated esters 405 are ultimately obtained via a Wolff rearrangement 236). The Z-5-aryl-2-diazo-3-oxopent-4-enoates undergo intramolecular insertion into an aromatic C—H bond instead (see Sect. 4.1). 

The rhodium-catalyzed intramolecular hydrosilylation of allylic alcohol derived silyl ethers has been described. Oxidative cleavage of the resulting cyclized hydrosilylation products affords a route to optically active diols (Scheme 28).129,130... 

Table 10 Impact of the chelating phosphine on levels of enantioselectivity in rhodium-catalyzed intramolecular hydrosilylation with [Rh(P-P)(acetone)2]+.

The cationic imidazolium rhodium complex (56) has been found to catalyze the intramolecular hydroamination of alkynes in refluxing THF. In the case of 2-ethynylaniline, indole is formed in 100% yield over 9h at 55 °C (Scheme 38).173 One of the earliest examples of late transition metal-catalyzed hydroamination involved the use of the iridium(I) complex [Ir(PEt3)2(C2H4)Cl] as... 

An initial step of orthometallation probably also occurs when aniline is allowed to react with ethylene in the presence of a rhodium(I) catalyst. 2-Methylquinoline (10 turnovers relative to the metal) and JV-ethylaniline (30 turnovers) are formed after 72 h in what are probably two independent reaction pathways (Scheme 144).216 It is interesting to note that the intramolecular cyclization step in the proposed216 mechanism (Scheme 144) has precedent in the palladium-promoted quinoline synthesis reported by Hegedus et al.16 (see Scheme 142), but the transformation 118->119 is unusual in the chemistry of organometallic insertion reactions.106... 

Two type la syntheses of (3-hydroxypyrroles have appeared. An aza-Nazarov cyclization of l-azapenta-l,4-dien-3-ones produced (3-hydroxypyrroles including 2,2 -bipyrroles <06EJO5339>. A second approach to a (3-hydroxypyrrole involved an intramolecular N-H insertion into a rhodium carbene derived from the decomposition of a diazoketone <06JOC5560>. On the other hand, the photochemical decomposition of the diazoketone led to pyrrolidin-2-ones. 

---