Rhenium sulfur containing

Since sulfur is the most effective of all catalyst poisons, the hydrogenation of sulfur containing heterocycles is not easily accomplished unless there are no unshared electron pairs on the sulfur atom or the catalyst used is not affected by the poison. The hydrogenation of the cyelie sulfone, 58, takes palace over an excess of palladium in acetic acid at room temperature and atmospheric pressure (Eqn. 17.57). Thiophene, itself, can be hydrogenated to tetrahydrothiophene over rhenium heptasulfide at 250°C and 300 atmospheres of hydrogen or over a large excess of palladium in methanolic sulfuric acid at room temperature and 3-4 atmospheres. No hydrogenolysis of the carbon-sulfiir bond was observed in these reactions. 

Because of the strong coordination of sulfur to metal surfaces, sulfur-containing molecules are very effective catalyst poisons. Nevertheless, a few examples of the hydrogenation of such molecules have been reported. Thiophene can be hydrogenated to tetrahydrothiophene by use of rhenium heptasulfide [44] under harsh conditions (250 °C and 300 atm hydrogen) or with a large excess of palladium in methanolic sulfuric acid [45]. In the synthesis of biotin, stereoselective civ-hydrogenation of a tri-substituted thiophene was achieved with Pd/C in acetic acid [46]. 

Larger rhenium complexes are also the subject of a number of publications. Reaction of an excess of thietane with the thietane complex fRe3(CX))jQ(p-H)3(p-cyclo-SCH2CH2CH2)] affords a number of ring-opening oligomerisation products from which sulfur containing macrocycles such as 12-S-4, 16-S-4 and 24-S-6 can be eliminated upon addition of pyridine . Addition of... 

Tantalum is a gray, heavy, and very hard metal. When pure, it is ductile and can be drawn into fine wire, which is used as a filament for evaporating metals such as aluminum. Tantalum is almost completely immune to chemical attack at temperatures below ISOoC, and is attacked only by hydrofluoric acid, acidic solutions containing the fluoride ion, and free sulfur trioxide. Alkalis attack it only slowly. At high temperatures, tantalum becomes much more reactive. The element has a melting point exceeded only by tungsten and rhenium. Tantalum is used to make a variety... 

The composition of a reforming catalyst is dictated by the composition of the feedstock and the desired reformate. The catalysts used are principally platinum or platinum—rhenium on an alumina base. The purpose of platinum on the catalyst is to promote dehydrogenation and hydrogenation reactions. Nonplatinum catalysts are used in regenerative processes for feedstocks containing sulfur, although pretreatment (hydrodesulfurization) may permit platinum catalysts to be employed. 

The latter case has been demonstrated with the reaction of [ReCl3(PPh3)2(CH3CN)] with a large excess of sodium diethyldithiocarbamate which results in sulfur abstraction and in the formation of a mixed phosphine/diethyldithiocarbamato/r/ -thiocarbamoyl complex. For the molecular structure of this compound see formula (225) which represents that of the corresponding rhe-nium(IV) cation which is formed by oxidation of the primarily formed Re complex and contains one rhenium-carbon bond. The formation of thiocarbamoyl compounds seems to be an essential... 

The same is true of rhenium catalysts rhenium heptoxide [42], rhenium heptasulfide [5i] and rhenimn heptaselenide [54] all require temperatures of 100-300° and pressures of 100-300 atm. Rhenium heptasulfide is not sensitive to sulfur, and is more active than molybdenum and cobalt sulfides in hydrogenating oxygen-containing functions [55,55]. 

---