Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Reinforced-plastic reaction-injection molding

Important are behaviors associated and interrelated with plastic materials (thermoplastics, thermosets, elastomers, reinforced plastics, etc.) and fabricating processes (extrusion, injection molding, blow molding, forming, foaming, reaction injection molding, etc.). They are presented so that the technical or non-technical reader can readily understand the interrelationships. [Pg.611]

Reimer-Tiemann reaction, 6 236 of salicylic acid, 22 5 Reinforced composites flax fiber in, 22 594 silylating agents and, 22 701-703 Reinforced plastics, 26 750-751 asbestos applications, 3 311 Reinforced polyester composites, 20 114 Reinforced reaction injection molding (RRIM), 25 456 Reinforcement... [Pg.798]

N nylon, PO polyolefin, elastomer, TPU thermoplastic urethane, GF glass fiber, NBR nitrile rubber, MAH maleic anhydride, EPR ethylene-propylene copolymer, l ionomer, M- mineral, ABS acrylonitrile-butadiene-styrene copolymer, PPE poly (phenylene ether), R reinforcement, PTFE poly(tetrafluoroethylene), CF° carbon fiber, PEBA poly(etherblockamide), S silicone, RIPP D reaction injection molding plastic, and ASA acrylate-styrene-acrylonitrile copolymer. [Pg.462]

A variation of RIM is reinforced reaction injection molding (RRIM). RRIM refers to a molding process in which the resin is pumped into a closed mold that has been preloaded with dry reinforcements. Polyester resins are often used, but polyurethanes, vinyl esters, and epoxies can be molded via RIM. The advantages of RIM over other reinforced plastic molding processes are ... [Pg.476]

See other pages where Reinforced-plastic reaction-injection molding is mentioned: [Pg.458] [Pg.470] [Pg.458] [Pg.470] [Pg.58] [Pg.251] [Pg.95] [Pg.278] [Pg.95] [Pg.278] [Pg.342] [Pg.108] [Pg.135] [Pg.476] [Pg.251] [Pg.278] [Pg.349] [Pg.544] [Pg.770] [Pg.6] [Pg.240] [Pg.265] [Pg.290] [Pg.432] [Pg.458] [Pg.44] [Pg.63] [Pg.336] [Pg.350] [Pg.431] [Pg.400] [Pg.212] [Pg.259] [Pg.44] [Pg.63] [Pg.336] [Pg.350] [Pg.516] [Pg.374] [Pg.6661] [Pg.836] [Pg.383]

SEARCH

Injection molding plasticizing

Injection molding reinforced plastic

Molds plastic

Plastic molding

REACTION INJECTION

Reaction molding

Reinforced plastics reinforcement

Reinforced reaction injection

Reinforced reaction injection molding

Reinforcements plastics