Refractory action

Surface defects (Section VII-4C) are also influenced by the history of the sample. Such imperfections may to some extent be reversibly affected by processes such as adsorption so that it is not safe to regard even a refractory solid as having fixed surface actions. Finally, solid surfaces are very easily contaminated detection of contamination is aided by ultra-high-vacuum techniques and associated cleaning protocols [24]. 

Refractories are materials that resist the action of hot environments by containing heat energy and hot or molten materials (1). There is no weU-estabhshed line of demarcation between those materials that are and those that are not refractory. The abiUty to withstand temperatures above 1100°C without softening has, however, been cited as a practical requirement of industrial refractory materials (see Ceramics). The type of refractories used in any particular apphcation depends on the critical requirements of the process. For example, processes that demand resistance to gaseous orHquid corrosion require low permeabihty, high physical strength, and abrasion resistance. Conditions that demand low thermal conductivity may require entirely different refractories. Combinations of several refractories are generally employed. 

Refractories in the Aluminum Industry. Carbon materials are used in the HaH-Heroult primary aluminum cell as anodes, cathodes, and sidewalls because of the need to withstand the corrosive action of the molten fluorides used in the process (see Aluminumand aluminum alloys). 

The Class I agents decrease excitability, slow conduction velocity, inhibit diastoHc depolarization (decrease automaticity), and prolong the refractory period of cardiac tissues (1,2). These agents have anticholinergic effects that may contribute to the observed electrophysiologic effects. Heart rates may become faster by increasing phase 4 diastoHc depolarization in SA and AV nodal cells. This results from inhibition of the action of vagaHy released acetylcholine [S1-84-3] which, allows sympathetically released norepinephrine [51-41-2] (NE) to act on these stmctures (1,2). 

Glass lA Antiarrhythmic Agents. Class lA antiarrhythmic agents decrease automaticity, ie, depress pacemaker rates, especially ectopic foci rates produce moderate depression of phase 0 depolarization and thus slow conduction in atria, A-V node, His-Purkinje system, and ventricles prolong repolarization, ie, lengthen action potential duration increase refractoriness and depress excitabiHty. These electrophysiological effects are manifested in the ECG by increases in the PR, QRS, and QT intervals. 

Glass IB Antiarrhythmic Agents. Class IB antiarrhythmic agents produce less inhibition of the inward sodium current than Class lA agents. In normal myocardial tissue, phase 0 may be unaffected or minimally depressed. However, in ischemic or infarcted tissue, phase 0 is depressed. Myocardial tissue exposed to Class IB agents exhibits decreased automaticity, shortened action potential duration, ie, shortened repolarization, and shortened refractory period. Excitability of the myocardium is not affected and conduction velocity is increased or not modified. The refractory period is shortened less than its action potential duration, thus the ratio of refractory period to action potential duration is increased by these agents. The net effect is increased refractoriness. The PR and QT intervals of the ECG are shortened and the QRS interval is unchanged (1,2). 

Pirmenol. Pirmenol hydrochloride, a pyridine methanol derivative, is a racemic mixture. It has Class lA antiarrhythmic activity, ie, depression of fast inward sodium current, phase 0 slowing, and action potential prolongation. The prolongation of refractory period may be a Class III property. This compound has shown efficacy in converting atrial arrhythmias to normal sinus rhythm (34,35). 

The Class III antiarrhythmic agents markedly prolong action potential duration and effective refractory period of cardiac tissue. The QT interval of the ECG is markedly prolonged. 

The electrophysiological effects of amiodarone may be a composite of several properties. In addition to prolonging action potential duration and refractory period in ad tissues of the heart, the compound is an effective sodium channel blocker (49), calcium channel blocker (50), and a weak noncompetitive -adrenoceptor blocking agent (51). Amiodarone slows the sinus rate, markedly prolongs the QT interval, and slightly prolongs the QRS duration (1,2). 

A carrier of more or less large specific surface, often refractory to withstand high temperatures. A carrier may have some promotion action for example, sinca carrier helps chromia catalyst. 

Corrective Action Application Hydrolysis was favorably applied to a site in which the wastewater contained very soluble, refractory organics. In addition, tars were being produced in high quantities on this site. Both of these problems were solved using a hydrolyzer. Figure 17 illustrates a flow diagram of this process. As a result, the wastewater treatment goals were achieved, and the production of tar was reduced. 

Kvl.5 In human atria, the Kvl.5 presents the ultrarapid delayed rectifier that contributes to the repolarization in the early phase of cardiac action potential. Selective blockers of Kvl.5 channels could be potentially beneficial in the treatment of atrial fibrillation because blocking Kvl. 5 could delay repolarization and prolong refractoriness selectively in cardiac myocytes. Examples for Kvl.5 blockers include AVE0118, S9947, and analogs of diphenyl phosphine oxide (DPO). 

Dantrolene is the mainstay of MH treatment. It has long been available for the treatment of muscle spasm in cerebral palsy and similar diseases. It is a hydantoin derivative that was first synthesized in 1967, and reported to be effective in the treatment of porcine MH in 1975. Also in 1975, dantrolene was shown to be more effective than procainamide in the treatment of human MH, which until that time was the drug of choice. However, the intravenous preparation was not made available until November 1979. It significantly lowered mortality. The half-life of dantrolene is estimated to be 6-8 hr. Dantrolene s primary mode of action is the reduction in calcium release by the sarcoplasmic reticulum. Dantrolene also exerts a primary antiarrhythmic effect by increasing atrial and ventricular refractory periods. Side effects of dentrolene include hepatotoxicity, muscle weakness, ataxia, blurred vision, slurred speech, nausea, and vomiting. Dantrolene is not contraindicated in pregnancy, but it does cross into breast milk and its effect on the neonate is unknown. 

In parallel with the identification of distinct transporters for GABA there has been continued interest in the development of selective blockers of these transporters and the therapeutic potential that could result from prolonging the action of synaptically released GABA. It has been known for a long time that certain pro-drugs of nipecotic add (e.g. nipecotic acid ethyl ester) are able to cross the blood-brain barrier and are effective anticonvulsants in experimental models of epilepsy. More recently, several different systemically active lipophillic compounds have been described that act selectively on GAT-1, GAT-2 or GAT-3 (Fig. 11.4). Of these, tiagabine (gabitiil), a derivative of nipecotic acid that acts preferentially on GAT -1, has proved clinically useful in cases of refractory epilepsy. 

The most important of these are the refractory cements formed by the heat treatment of aluminium acid phosphate solutions. This subject has been well reviewed by Kingery (1950a), Morris et al. (1977), Cassidy (1977) and O Hara, Duga Sheets (1972). The chemistry of these binders is extremely complex as the action of heat on acid phosphates gives rise to polymeric phosphates, with P-O-P linkages, and these are very complex systems (Ray, 1979). 

Electrolytic cells are constructed of materials that can withstand the action of the electrolytes and of the electrode products. The cell may be of the open type or may be partially or fully closed, depending on the requirement of handling the electrode products. Some of these cells will be described while dealing with the production of specific metals. Very stringent requirements are imposed when considering the design of electrolytic cells for the deposition of refractory and reactive metals. Most of such metals are produced by using molten salt electrolytes. These metals are prone to atmospheric contamination at the electrolysis temperature, and it is thus necessary to operate the cell under an inert atmosphere. 

After an electrical impulse is initiated and conducted, there is a period of time during which cells and fibers cannot be depolarized again. This period of time is referred to as the absolute refractory period (Fig. 6-2),2 and corresponds to phases 1,2, and approximately half of phase 3 repolarization on the action potential. The absolute refractory period also corresponds to the period from the Q wave to approximately the first half of the T wave on the ECG (Fig. 6-2). During this period, if there is a premature stimulus for an electrical impulse, this impulse cannot be conducted, because the tissue is absolutely refractory. 

---