Redox hydrogenation

Evdou, A., Nalbandlan, L., and Zaspalis, V.T. (2008) Perovskite membrane reactor for continuous and isothermal redox hydrogen production from the dissociation of water. / Membr. Set, 325, 704-711. 

The main objectives of the Takahax development program were to devise a liquid redox hydrogen sulfide removal process comparable to the Stretford process and to eliminate the use of heavy metals to oxidize the hydrogen sulfide. The new process also sought to minimize the periodic liquid purging that is commonly used in liquid redox systems to eliminate the build-up of undesirable contaminants in the scrubbing solution. 

Oxidoreduciases. Enzymes catalysing redox reactions. The substrate which is oxidized is regarded as the hydrogen donor. This group includes the trivially named enzymes, dehydrogenases, oxidases, reductases, peroxidases, hydrogenases and hydroxylases. 

If two redox electrodes both use an inert electrode material such as platinum, tlie cell EMF can be written down iimnediately. Thus, for the hydrogen/chlorine fiiel cell, which we represent by the cell Fl2(g) Pt FICl(m) Pt Cl2(g) and for which it is clear that the cathodic reaction is the reduction of CI2 as considered in section... 

When either hydrogen ions or hydroxide ions participate in a redox half-reaction, then clearly the redox potential is alTected by change of pH. Manganate(Vir) ions are usually used in well-acidified solution, where (as we shall see in detail later) they oxidise chlorine ions. If the pH is increased to make the solution only mildly acidic (pH = 3-6), the redox potential changes from 1.52 V to about 1.1 V, and chloride is not oxidised. This fact is of practical use in a mixture of iodide and chloride ions in mildly acid solution. manganate(VII) oxidises only iodide addition of acid causes oxidation of chloride to proceed. 

As the above redox potentials indicate, only in the presence of very powerful oxidising agents does hydrogen peroxide behave as a reducing agent. For example ... 

Many of the reactions of halogens can be considered as either oxidation or displacement reactions the redox potentials (Table 11.2) give a clear indication of their relative oxidising power in aqueous solution. Fluorine, chlorine and bromine have the ability to displace hydrogen from hydrocarbons, but in addition each halogen is able to displace other elements which are less electronegative than itself. Thus fluorine can displace all the other halogens from both ionic and covalent compounds, for example... 

In addition to CuCfi, some other compounds such as Cu(OAc)2, Cu(N03)2-FeCl.i, dichromate, HNO3, potassium peroxodisulfate, and Mn02 are used as oxidants of Pd(0). Also heteropoly acid salts comtaining P, Mo, V, Si, and Ge are used with PdS04 as the redox system[2]. Organic oxidants such as benzo-quinone (BQ), hydrogen peroxide and some organic peroxides are used for oxidation. Alkyl nitrites are unique oxidants which are used in some industrial... 

A selected list of redox indicators will be found in Table 8.26. A redox indicator should be selected so that its if" is approximately equal to the electrode potential at the equivalent point, or so that the color change will occur at an appropriate part of the titration curve. If n is the number of electrons involved in the transition from the reduced to the oxidized form of the indicator, the range in which the color change occurs is approximately given by if" 0.06/n volt (V) for a two-color indicator whose forms are equally intensely colored. Since hydrogen ions are involved in the redox equilibria of many indicators, it must be recognized that the color change interval of such an indicator will vary with pH. 

Arsenic is another element with different bioavailabiUty in its different redox states. Arsenic is not known to be an essential nutrient for eukaryotes, but arsenate (As(V)) and arsenite (As(III)) are toxic, with the latter being rather more so, at least to mammals. Nevertheless, some microorganisms grow at the expense of reducing arsenate to arsenite (81), while others are able to reduce these species to more reduced forms. In this case it is known that the element can be immobilized as an insoluble polymetallic sulfide by sulfate reducing bacteria, presumably adventitiously due to the production of hydrogen sulfide (82). Indeed many contaminant metal and metalloid ions can be immobilized as metal sulfides by sulfate reducing bacteria. 

Heat treatment of related glasses melted under reducing conditions can yield a unique microfoamed material, or "gas-ceramic" (29). These materials consist of a matrix of BPO glass-ceramic filled with uniformly dispersed 1—10 p.m hydrogen-filled bubbles. The hydrogen evolves on ceranarning, most likely due to a redox reaction involving phosphite and hydroxyl ions. These materials can have densities as low as 0.5 g/cm and dielectric constants as low as 2. 

Hydrogen peroxide may react directiy or after it has first ionized or dissociated into free radicals. Often, the reaction mechanism is extremely complex and may involve catalysis or be dependent on the environment. Enhancement of the relatively mild oxidizing action of hydrogen peroxide is accompHshed in the presence of certain metal catalysts (4). The redox system Fe(II)—Fe(III) is the most widely used catalyst, which, in combination with hydrogen peroxide, is known as Fenton s reagent (5). 

The most common water-soluble initiators are ammonium persulfate, potassium persulfate, and hydrogen peroxide. These can be made to decompose by high temperature or through redox reactions. The latter method offers versatility in choosing the temperature of polymerization with —50 to 70°C possible. A typical redox system combines a persulfate with ferrous ion ... 

Fig. 6. Band edge positions of several semiconductors ia contact with an aqueous electrolyte at pH 1 ia relation to the redox (electrode) potential regions (vs the standard hydrogen electrode) for the oxidation of organic functional groups (26,27).

Hydroquinone [123-31 -9] represents a class of commercially important black-and-white chemical reducing agents (see Hydroquinone,RESORCINOL, AND catechol). The following scheme for silver haUde development with hydroquinone shows the quantitative importance of hydrogen ion and haUde ion concentrations on the two half-ceU reactions that describe the silver—hydroquinone redox system ... 

An example of the Michael chemistry, typical of all quinones bearing a replaceable hydrogen, is the preparation of a sulfone (6) (in 55% yield), which was ultimately converted to a polystyrene redox polymer (11). 

NKK s Bio-SR process is another iron-based redox process which instead of chelates, uses Thiobacillusferroidans )2iQ. - 2i to regenerate the solution (9). This process absorbs hydrogen sulfide from a gas stream into a ferric sulfate solution. The solution reacts with the hydrogen sulfide to produce elemental sulfur and ferrous sulfate. The sulfur is separated via mechanical means, such as filtering. The solution is regenerated to the active ferric form by the bacteria. 

Anhydrous stannous chloride, a water-soluble white soHd, is the most economical source of stannous tin and is especially important in redox and plating reactions. Preparation of the anhydrous salt may be by direct reaction of chlorine and molten tin, heating tin in hydrogen chloride gas, or reducing stannic chloride solution with tin metal, followed by dehydration. It is soluble in a number of organic solvents (g/100 g solvent at 23°C) acetone 42.7, ethyl alcohol 54.4, methyl isobutyl carbinol 10.45, isopropyl alcohol 9.61, methyl ethyl ketone 9.43 isoamyl acetate 3.76, diethyl ether 0.49, and mineral spirits 0.03 it is insoluble in petroleum naphtha and xylene (2). 

---