Reagents, for hydrolysis

Sulphonatnides. Sulphonamides are very resistant to the normal reagents for hydrolysis. Heating with 80 per cent, sulphuric acid at 160-170° results in rapid hydrolysis ... 

The reagent for hydrolysis may be hydrochloric acid, sulfuric acid, or ammonium chloride solution. Water alone leads to magnesium hydroxide, which makes further working up more difficult. 

Hydrolysis of amides and esters, Potassium r-butoxide in combination with water (2 1 equiv.) as a slurry in ether is an excellent reagent for hydrolysis of tertiary amides at room temperature (65-1007o yield). One drawback is that primary and secondary amides are resistant to these conditions. The reagent is essentially finely divided anhydrous potassium hydroxide. It is also useful for hydrolysis of esters at room temperature (70-1007o yield). Simple esters are hydrolyzed in 1-2 hours, but longer reaction periods are required for hindered esters. Even methyl mesitoate can be saponified in 75 7 yield at room temperature in the course of 5-6 days. ... 

Other reagents for hydrolysis are alcoholic alkali, alcoholic hydrochloric acid, and strong acids under pressure. 

The compound (III) can however lose ethanol by an internal Claisen ester condensation (p. 264) to give the cyclohexane derivative (IV), which, being the ester of a (3-keto acid, in turn readily undergoes hydrolysis and decarboxylation to give 5,5Hiimethyl cyclohexan-i,3Hiione (V) or Dimedone, a valuable reagent for the detection and estimation of formaldehyde. 

Mono-substitution products of primary amines cannot easUy be prepared by direct action of the appropriate reagent for example, bromination of aniline yields largely the 2 4 6-tribomo derivative and nitration results in much oxidation. If, however, the amino group is protected as in acetanilide, smooth substitution occurs. Thus with bromine, />-bromoacetanilide is the main product the small quantity of the ortlio isomeride simultaneously formed can be easily eliminated by crystallisation. Hydrolysis of p-bromoacetanilide gives/ -bromoaniline ... 

Sulfosahcyhc acid is prepared by heating 10 parts of sahcyhc acid with 50 parts of concentrated sulfuric acid, by chlorosulfonation of sahcyhc acid and subsequent hydrolysis of the acid chloride, or by sulfonation with hquid sulfur trioxide in tetrachloroethylene. It is used as an intermediate in the production of dyestuffs, grease additives, catalysts, and surfactants. It is also useful as a colorimetric reagent for ferric iron and as a reagent for albumin. Table 9 shows the physical properties of sahcyhc acid derivatives. 

LiBF4, wet CH3CN, 96% yield.Unsubstituted 1,3-dioxolanes are hydrolyzed only slowly, but substituted dioxolanes are completely stable.This reagent proved excellent for hydrolysis of the dimethyl ketal in the presence of the acid-sensitive oxazolidine. ... 

The Npys group can be. cleaved reductively with BU3P, H2O or mercaptoethanol. It is stable to CF3COOH (24 h), 4 M HCl/dioxane (24 h), and HF (1 h). The related reagent, 2-pyridinesulfenyl chloride, has also been proposed as a useful reagent for the deprotection of the 5-trityl, 5-diphenylmethyl, 5-acetamidomethyl, 5-/-butyl, and S-r-butylsulfenyl groups, but this reagent is very susceptible to hydrolysis. ... 

Nevertheless Kipping made a number of contributions of value to the modem silicone industry. In 1904 he introduced the use of Grignard reagents for the preparation of chlorosilanes and later discovered the principle of the inter-molecular condensation of the silane diols, the basis of current polymerisation practice. The term silicone was also given by Kipping to the hydrolysis products of the disubstituted silicon chlorides because he at one time considered them as being analogous to the ketones. 

Iodosobenzene diacetate is used as a reagent for the preparation of glycol diacetates from olefins,9 for the oxidation of aromatic amines to corresponding azo compounds,10 for the ring acetylation of N-arylacetamides,11 for oxidation of some phenols to phenyl ethers,12 and as a coupling agent in the preparation of iodonium salts.13 Its hydrolysis to iodosobenzene constitutes the best synthesis of that compound.14... 

Attention has been drawn to the potential of phosphoric acid anhydrides of nucleoside 5 -carboxylic acids (14) as specific reagents for investigating the binding sites of enzymes. For example, (14 B = adenosine) inactivates adenylosuccinate lyase from E. coli almost completely, but has little effect on rabbit muscle AMP deaminase. The rate of hydrolysis of (14) is considerably faster than that of acetyl phosphate, suggesting intramolecular assistance by the 3 -hydroxyl group or the 3-nitrogen atom. 

Reagent pump (post-column) Merck-Hitachi 655A-13, equipped with one reactor containing a 10-m Teflon loop (thermostated at 95 °C) for hydrolysis which is connected to a 50-p.L Teflon loop (at ambient temperature) for fluorescence reagent addition... 

---