Reactor digital control loop

Figure 21. Block diagram of digital control loop for downstream reactors...

Cascade control, 395-402, 410, 445 Catalytic reactors auctioneering control, 405-7 fluid catalytic cracking, 75-76 regeneration of catalyst, 406 Centra] processing unit, 553-54 Characteristic equation, 285-87 of digital control loop, 623, 628 Characteristic polynomial, 145, 167, 321 of second-order system, 188 Chemical reactors batch (see Batch reactor) catalytic (see Catalytic reactor)... 

The equipment used in this application included two Waters M-45 pumps, a Waters 481 UV detector with microbore cell, an air-actuated Rheodyne 7413 injection valve with a 1-pl injection loop, an air-actuated Valeo four-port sampling valve (A2CI4UW2) with no groove in the injection entry ports, an air-actuated Valeo three-port switching valve (AC3W), and a Digital Equipment LSI-11/23 microcomputer. The LC system was located in a purged cabinet suitable for use in Class I, division 2 areas. The cabinet was in a heated room about 40 feet from the reactor column. The two Valeo valves were mounted next to the reactor column, while the microcomputer was located in the control room. 

The fine measuring loop was installed to strictly and accurately control the reactor water level. The loop has a pressure sensor pipe sank in the reactor lank with a deepness of 20 cm (measuring range is 0-20 cm), pressure difference transmitter type ARK-200 and digit indicator type 3.1/2 digit LED DMP. 

---