Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Reactions aromatic substrates

These systems nitrate aromatie eompounds by a proeess of electro-philie substitution, the eharacter of whieh is now understood in some detail ( 6.1). It should be noted, however, that some of them ean eause nitration and various other reactions by less well understood processes. Among sueh nitrations that of nitration via nitrosation is especially important when the aromatic substrate is a reactive one ( 4.3). In reaetion with lithium nitrate in aeetie anhydride, or with fuming nitrie aeid, quinoline gives a small yield of 3-nitroquinoline this untypieal orientation (ef. 10.4.2 ) may be a eonsequenee of nitration following nucleophilic addition. ... [Pg.2]

Only small quantities of iron(III) bromide are required It is a catalyst for the brommation and as Figure 12 6 indicates is regenerated m the course of the reaction We 11 see later m this chapter that some aromatic substrates are much more reactive than benzene and react rapidly with bromine even m the absence of a catalyst... [Pg.480]

A study of the aromatic nitration reaction in aqueous nitric acid revealed that when no aromatic substrate was present, an incorporation of 0 from labeled water into nitric acid occurred. [Pg.258]

TWo types of rate expressions have been found to describe the kinetics of most aromatic nitration reactions. With relatively unreactive substrates, second-order kinetics, first-order in the nitrating reagent and first-order in the aromatic, are observed. This second-order relationship corresponds to rate-limiting attack of the electrophile on the aromatic reactant. With more reactive aromatics, this step can be faster than formation of the active electrq)hile. When formation of the active electrophile is the rate-determining step, the concentration of the aromatic reactant no longer appears in the observed rate expression. Under these conditions, different aromatic substrates undergo nitration at the same rate, corresponding to the rate of formation of the active electrophile. [Pg.554]

Molecular bromine is believed to be the reactive brominating agent in uncatalyzed brominations. The brominations of benzene and toluene are first-order in both bromine and the aromatic substrate in trifluoroacetic acid solution, but the rate expressions become more complicated when these reactions take place in the presence of water. " The bromination of benzene in aqueous acetic acid exhibits a first-order dependence on bromine concentration when bromide ion is present. The observed rate is dependent on bromide ion concentration, decreasing with increasing bromide ion concentration. The detailed kinetics are consistent with a rate-determining formation of the n-complex when bromide ion concentration is low, but with a shift to reversible formation of the n-complex... [Pg.577]

Rates that are independent of aromatic substrate concentration have been found for reaction of benzyl chloride catalyzed by TiCl4 or SbFj in nitromethane. This can be interpreted as resulting from rate-determining formation of the electrophile, presumably a benzyl cation. The reaction of benzyl chloride and toluene shows a second-order dependence on titanium tetrachloride concentration under conditions where there is a large excess of hydrocarbon. ... [Pg.581]

Friedel-Crafts acylation usually involves the reaction of an acyl halide, a Lewis acid catalyst, and the aromatic substrate. Several species may function as the active electrophile, depending on the reactivity of the aromatic compound. For activated aromatics, the electrophile can be a discrete positively charged acylium ion or the complex formed... [Pg.583]

A novel reaction of perchloryl fluoride with aromatic substrates was discovered by Neeman and Osawa, the oxofluorination reaction. These authors found that reaction of indene with perchloryl fluoride in dioxane-water yields five products, the major product being, 2-fluoroindanone. When applied to 6-dehydroestradiol diacetate (24) there is obtained as the major product the 7a-fluoro-6-ketone (25). Borohydride reduction of the... [Pg.477]

Other well-known reactions are those offluorinated olefins with fluoride ion and negatively substituted aromatic compounds leading to the formation of per-fiuoroalkylated aromatic compounds The reaction may be considered an amonic version of a Fnedel Crafts process and can result in introduction of one or several perfluoroalkyl substituents [/ /] Aromatic substrates include substituted and unsuhstiluled perfiuorobenzenes [J3l, 212, 213, 214], fiuorinated heterocycles [131, 203, 215, 216, 217, 218, 219, 220, 221, 222, 223],perchlorinated heterocycles [224] (equation 44), and other activated aromatic compounds [225] (equation 45) The fluonnated olefins can be linear or cyclic [208] (equation 46)... [Pg.79]

Carboxylic acids react with xenon difluoride to produce unstable xenon esters The esters decarboxylate to produce free radical intermediates, which undergo fluonnation or reaction with the solvent system Thus aliphatic acids decarboxylate to produce mainly fluoroalkanes or products from abstraction of hydrogen from the solvent Perfluoro acids decarboxylate in the presence of aromatic substrates to give perfluoroalkyl aromatics Aromatic and vinylic acids do not decarboxylate [91] (equation 51)... [Pg.161]

Perfluoroalkylation can be accomplished via direct reaction of peifluoroalkyl halides and copper with aromatic substrates [232, 233, 234, 235, 236] Thus, perfluoroalkyl iodides or bromides react with functionalized benzenes m DMSO m the presence of copper bronze to give the corresponding perfluoroalkylated products directly in moderate to good yields [233] (equation 157) Mixtures of ortho, meta, and para isomers are obtained [232, 233], The use of acetic anhydride as solvent gives similar results [234, 235], Similarly, the direct reaction of perfluoroalkyl iodides and pyrroles with copper metal regiospecifically gives the 2-perfluoroalkylpyrroles [236] (equation 158). [Pg.708]

The Pictet-Spengler reaction is an acid-catalyzed intramolecular cyclization of an intermediate imine of 2-arylethylamine, formed by condensation with a carbonyl compound, to give 1,2,3,4-tetrahydroisoquinoline derivatives. This condensation reaction has been studied under acid-catalyzed and superacid-catalyzed conditions, and a linear correlation had been found between the rate of the reaction and the acidity of the reaction medium. Substrates with electron-donating substituents on the aromatic ring cyclize faster than the corresponding unsubstituted compounds, supporting the idea that the cyclization process is involved in the rate-determining step of the reaction. [Pg.470]

Electron-rich aromatic substrates can react without a catalyst present. Modern variants of the Blanc reaction use chloromethyl ether" (e.g. (C1CH2)20, ClCH20Me) or methoxyacetyl chloride, since those reagents are more reactive and give higher yields. [Pg.46]

The optimal pH-value for the coupling reaction depends on the reactant. Phenols are predominantly coupled in slightly alkaline solution, in order to first convert an otherwise unreactive phenol into the reactive phenoxide anion. The reaction mechanism can be formulated as electrophilic aromatic substitution taking place at the electron-rich aromatic substrate, with the arenediazonium ion being the electrophile ... [Pg.84]

The most important method for the synthesis of aromatic ketones 3 is the Friedel-Crafts acylation. An aromatic substrate 1 is treated with an acyl chloride 2 in the presence of a Lewis-acid catalyst, to yield an acylated aromatic compound. Closely related reactions are methods for the formylation, as well as an alkylation procedure for aromatic compounds, which is also named after Friedel and Crafts. [Pg.116]

The reaction is initiated by formation of a donor-acceptor complex 4 from acyl chloride 2, which is thereby activated, and the Lewis acid, e.g. aluminum trichloride. Complex 4 can dissociate into the acylium ion 5 and the aluminum tetrachloride anion 4 as well as 5 can act as an electrophile in a reaction with the aromatic substrate ... [Pg.116]

Depending on the specific reaction conditions, complex 4 as well as acylium ion 5 have been identified as intermediates with a sterically demanding substituent R, and in polar solvents the acylium ion species 5 is formed preferentially. The electrophilic agent 5 reacts with the aromatic substrate, e.g. benzene 1, to give an intermediate cr-complex—the cyclohexadienyl cation 6. By loss of a proton from intermediate 6 the aromatic system is restored, and an arylketone is formed that is coordinated with the carbonyl oxygen to the Lewis acid. Since a Lewis-acid molecule that is coordinated to a product molecule is no longer available to catalyze the acylation reaction, the catalyst has to be employed in equimolar quantity. The product-Lewis acid complex 7 has to be cleaved by a hydrolytic workup in order to isolate the pure aryl ketone 3. [Pg.117]

The synthesis of an alkylated aromatic compound 3 by reaction of an aromatic substrate 1 with an alkyl halide 2, catalyzed by a Lewis acid, is called the Friedel-Crafts alkylation This method is closely related to the Friedel-Crafts acylation. Instead of the alkyl halide, an alcohol or alkene can be used as reactant for the aromatic substrate under Friedel-Crafts conditions. The general principle is the intermediate formation of a carbenium ion species, which is capable of reacting as the electrophile in an electrophilic aromatic substitution reaction. [Pg.120]

If the alkyl halide contains more than one, equally reactive C-halogen centers, these will generally react each with one aromatic substrate molecule. For example dichloromethane reacts with benzene to give diphenylmethane, and chloroform will give triphenylmethane. The reaction of tetrachloromethane with benzene however stops with the formation of triphenyl chloromethane 7 (trityl chloride), because further reaction is sterically hindered ... [Pg.121]

The preparation of a formyl-substituted aromatic derivative 3 from an aromatic substrate 1 by reaction with hydrogen cyanide and gaseous hydrogen chloride in the presence of a catalyst is called the Gattermann synthesis This reaction can be viewed as a special variant of the Friedel-Crafts acylation reaction. [Pg.133]

Another formylation reaction, which is named after Gattermann, is the Gatter-mann-Koch reaction. This is the reaction of an aromatic substrate with carbon monoxide and hydrogen chloride (gas) in the presence of a Lewis acid catalyst. Similar to the Gattermann reaction, the electrophilic agent 9 is generated, which then reacts with the aromatic substrate in an electrophilic aromatic substitution reaction to yield the formylated aromatic compound 10 ... [Pg.134]

Arenediazonium species 1 can be reacted with another aromatic substrate 2, by the Gomberg-Bachmann procedure, to yield biaryl compounds 3. The intramolecular variant is called the Pschorr reaction ... [Pg.139]

The very reactive phenyl radical reacts with the aromatic substrate 2, present in the reaction mixture. Subsequent loss of a hydrogen radical, which then combines with 7 to give 4, yields a biaryl coupling product e.g. the unsymmetrical biphenyl derivative 3 ... [Pg.140]

A common method for the preparation of alkyl cyanide 2 is the treatment of corresponding alkyl halides 1 with cyanide. The corresponding reaction with aromatic substrates is called the Rosenmund-von-Braun reaction. [Pg.184]

Of particular synthetic importance is the coupling of aryl- and hetarylboronic acids to aryl- and hetaryl halides (or triflates), allowing for a convenient synthesis of biphenyls, even sterically demanding derivatives such as 14, hetaryl phenyls and Zj/ -hetaryls. With appropriately disubstituted aromatic substrates, the Suzuki coupling reaction can be applied in the synthesis of polyphenylene materials. [Pg.273]

In an initial step the reactive formylating agent is formed from N,N-dimethylformamide (DMF) 2 and phosphorus oxychloride. Other N,N-disubstituted formamides have also found application for example A -methyl-A -phenylformamide is often used. The formylating agent is likely to be a chloromethyl iminium salt 4—also called the Vilsmeier complex (however its actual structure is not rigorously known)—that acts as the electrophile in an electrophilic substitution reaction with the aromatic substrate 1 (see also Friedel-Crafts acylation reaction) ... [Pg.280]

The initial product 5 of the electrophilic aromatic substitution step is unstable and easily hydrolyzes to yield the aromatic aldehyde 3 as the final reaction product. With mo o-substituted aromatic substrates the para-substituted aldehyde is formed preferentially. [Pg.281]

With respect to aromatic substrates, the Vilsmeier formylation reaction works well with electron-rich derivatives like phenols, aromatic amines and aromatic heterocycles like furans, pyrroles and indoles. However various alkenes are also formylated under Vilsmeier conditions. For example the substituted hexatriene 6 is converted to the terminal hexatrienyl aldehyde 7 in 70% yield ... [Pg.281]

The chain propagation step consists of a reaction of allylic radical 3 with a bromine molecule to give the allylic bromide 2 and a bromine radical. The intermediate allylic radical 3 is stabilized by delocalization of the unpaired electron due to resonance (see below). A similar stabilizing effect due to resonance is also possible for benzylic radicals a benzylic bromination of appropriately substituted aromatic substrates is therefore possible, and proceeds in good yields. [Pg.299]

Figure 16.8 Limitations on the aromatic substrate in Friedel-Crafts reactions. No reaction occurs if the substrate has either an electron-withdrawing substituent or an amino group. Figure 16.8 Limitations on the aromatic substrate in Friedel-Crafts reactions. No reaction occurs if the substrate has either an electron-withdrawing substituent or an amino group.
Substituent effect, additivity of, 570 electrophilic aromatic substitution and, 560-563 summary of. 569 Substitution reaction, 138 Substrate (enzyme), 1041 Succinic acid, structure of, 753 Sucralose, structure of. 1006 sweetness of, 1005 Sucrose, molecular model of. 999 specific rotation of, 296 structure of, 999 sweetness of, 1005 Sugar, complex, 974 d, 980 L, 980... [Pg.1316]

Isopropoxycarbonyloxy radicals undergo facile reaction with aromatic substrates (e.g. toluene) by reversible aromatic substitution. 94 Isopropoxycarbonyloxy radicals react with S to give ring substitution (ca 1%) as well as the expected double bond addition.40 ... [Pg.128]


See other pages where Reactions aromatic substrates is mentioned: [Pg.404]    [Pg.405]    [Pg.71]    [Pg.287]    [Pg.555]    [Pg.21]    [Pg.568]    [Pg.953]    [Pg.315]    [Pg.340]    [Pg.381]    [Pg.290]    [Pg.306]    [Pg.157]    [Pg.165]    [Pg.165]    [Pg.123]    [Pg.557]   
See also in sourсe #XX -- [ Pg.458 ]




SEARCH



Electrophilic aromatic substitution reactions epoxide substrate

Reaction of Miscellaneous Aromatic Substrates

Substrate reaction

© 2024 chempedia.info