Radio-frequency technology

B. Wilson, 50 Si Radio Frequency Technology The Future of Advanced Thermal Processing, presentation at the 45th Annual Symposium of the International Microwave Power Institute, 2011. 

Keskilammi M, Sydanheimo L, Kivikoski M (2003) Radio frequency technology for automated manufacturing and logistics. Part 1 passive RFID systems and the effects of antenna parameters on operational distance. Int Adv Manuf Technol 21 769-774... 

Radio antennas Radio astronomy Radioautogiaphy Radiochemical analysis Radiochemical technology Radiofibrosis Radio frequency... 

An innovative companion technology to SVE is radio frequency heating of the soil (42,43). Heating the soil increases the volatilization of the containments which are removed by SVE. Antennae are installed near the center of the contaminated area the radio frequency energy appHed through the anteimae heat the soil to target levels of 100 to 150°C. 

Dielectric and Microwave Dryers. Dielectric, also caEed radio frequency, dryers operate in the frequency range of 1—100 MHz. Microwave dryers in the United States operate at 915 MHz and 2450 MHz (see Microwave technology). As depicted in Figure 24, a dielectric dryer may consist of two... 

A large number of CVD diamond deposition technologies have emerged these can be broadly classified as thermal methods (e.g., hot filament methods) and plasma methods (direct current, radio frequency, and microwave) [79]. Film deposition rates range from less than 0.1 pm-h to 1 mm-h depending upon the method used. The following are essential features of all methods. 

Kymissis et al. have examined the possibility of generation of electrical power parasitically from devices built in a shoe, a wearable subsystem for the soldier. Merits of three different types of piezoelectric devices are compared. They are a unimorph strip piezoceramic composite, a stave of multilayer laminate of PVDF foil, and a shoe-mounted rotary magnetic generator as a part of technology demonstration a piezoelectric embedded shoe has also been postulated to periodically broadcast a digital radio frequency identification (RFID) signal as the wearer walks. 

Richard L. Rowe is retired chief executive officer of MCMS, Inc., a 550 million electronics contract manufacturing company. His experience includes sensor technologies applied to aviation security, and his expertise includes new technologies in optics and radio frequency, electronic sensors, and switch products. He has more than 20 years of experience in the electronic sensors and switch products in-... 

Lowe, D.F., Oubre, C.L. and Ward, C.H., Eds., Soil vapor extraction using radio frequency heating, in Resource Manual and Technology Demonstration, Lewis Publishers, Boca Raton, FL, 1999. 

Non-thermal plasmas can be produced in a number of ways, including a variety of electrical corona discharges, radio frequency discharges, microwave discharges and electron beams. The most common NTP technologies for emission reduction in engine exhaust streams are the following. 

PAT process analytical technology RFI radio frequency impedance... 

---