Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Pyrrolidine enantioselectivity

Progress has been made toward enantioselective and highly regioselective Michael type alkylations of 2-cyclohexen-l -one using alkylcuprates with chiral auxiliary ligands, e. g., anions of either enantiomer of N-[2-(dimethylamino)ethyl]ephedrine (E. J. Corey, 1986), of (S)-2-(methoxymethyl)pyrrolidine (from L-proline R. K. EHeter, 1987) or of chiramt (= (R,R)-N-(l-phenylethyl)-7-[(l-phenylethyl)iinino]-l,3,5-cycloheptatrien-l-amine, a chiral aminotro-ponimine G. M. Villacorta, 1988). Enantioselectivities of up to 95% have been reported. [Pg.20]

Design of chiral catalysis and asymmetric autocatalysis for diphenyl-(l-methyl-pyrrolidin-2-yl) methanol-catalyzed enantioselective additions of organozinc reagents 97YGK994. [Pg.247]

The first reports on enantioselective addition reactions of achiral organometallic reagents, modified by aprotic chiral additives, described the addition of Grignard reagents to prostereogenic carbonyl compounds in the presence of ( + )-(/ ,/J)-2,3-dimethoxybutane (l)4 5, (-)-tetrahydro-2-methylfuran (2)6, (-)-l-[(tetrahydro-2-furanyl)methyl]pyrrolidine (3)7 or (-)-sparteine (4)8. The enantioselectivity, however, was poor (0-22% ee). [Pg.147]

One of the most intensively studied protic chiral ligands, which moreover allows enantioselectivities of up to 95% ee, is the proline-derived (25 )-l- [(25,)-l-methyl-2-pyrrolidinyl]methyl -2-pyrrolidine methanol (6)19-21. [Pg.150]

Enantioselective synthesis of Hantzsch 1,4-dihydropyridines was developed based on similar 1,4-additions of /1-oxoester derivatives to 2-(arylmethylene)-3-oxopropanoates. High enantiomeric excess (84-98%) was achieved when (5 )-l-amino-2-(l-methoxy-l-methylethyl)pyrrolidine was used at the auxiliary202. [Pg.977]

Imidazole and its derivatives continued to play an important role in asymmetric processes. Optically active pyrroloimidazoles 26 were prepared by the cycloaddition of homochiral imidazolium ylides with activated alkenes <96TL1707>. This reaction was used in the enantioselective preparation of pyrrolidines <96TL1711>. A review of the use of chiral imidazolidines in asymmetric synthesis was published <96PAC531> and the preparation and use of a new camphor-derived imidazolidinone-type auxiliary 27 was reported < 6TL4565> <96TL6931>. [Pg.155]

An auxiliary controlled enantioselective route to generate seven-membered ring lactams 75 used the a-alkylation of cyclic hydrazide derivatives 74. Initially, 6-chloro hydrazides 73,bearing the chiral information in the M-amino-pyrrolidine function underwent amidocyclization in the presence of a base. A subse-... [Pg.138]

Campos, K.R., Klapers, A., Waldman, J.H., Dormer, P.G., Chen, C.Y. (2006) Enantioselective, Palladium-Catalyzed a-Arylation of N-Boc-pyrrolidine. Journal of the American Chemical Society, 128, 3538-3539. [Pg.189]

An examination of the catalytic abilities of C2-symmetric chiral A-(p-mer-captoethyl)pyrrolidines in the enantioselective addition of ZnEt2 to a variety of... [Pg.122]

In order to synthesise the pyrrolidine alkaloid, (-l-)-197B, bis-(i ,i )-tri-fluoromethanesulfonamide ligand was employed in the enantioselective addition of Zn( -Bu)2 to an allene-aldehyde, alfording the corresponding (i )-alcohol in 70% yield and 94% ee (Scheme 3.52). ... [Pg.137]

In 1998, Ruiz et al. reported the synthesis of new chiral dithioether ligands based on a pyrrolidine backbone from (+ )-L-tartaric acid. Their corresponding cationic iridium complexes were further evaluated as catalysts for the asymmetric hydrogenation of prochiral dehydroamino acid derivatives and itaconic acid, providing enantioselectivities of up to 68% ee, as shown in Scheme 8.18. [Pg.255]

Rhodium complexes of (R,i )-1-benzyl-3,4-dithioether-pyrrolidines were also prepared by these authors, who further investigated them as ligands of rhodium complexes in the hydroformylation of styrene but, in all experiments, the enantioselectivity was lower than 3% ee, whereas the chemoselectivity was of 97% (Scheme 10.5). ... [Pg.296]

As another extension of this process, Davies et al. have developed highly regio-, diastereo- and enantioselective C-H insertions of methyl aryldiazoace-tates into cyclic A-Boc-protected amines catalysed by rhodium(II) S)-N- p-dodecylphenyl)sulfonylprolinate. The best results were obtained in the case of the C-H insertion of methyl aryldiazoacetates into A-Boc-pyrrolidine, which gave, in all cases, a diastereoselectivity and an enantioselectivity greater than 90% de and 90% ee respectively (Scheme 10.77). The synthetic utility of this method was demonstrated by means of a two-step asymmetric synthesis of a novel class of C2-symmetric amines. [Pg.355]

The enantioselectivity of Sn(II) enolate reactions can be controlled by chiral diamine additives. These reagents are particularly effective for silyl thioketene acetals.162 Several diamines derived from proline have been explored and l-methyl-2-(l-piperidinomethyl)pyrrolidine 21 is an example. Even higher enantioselectivity can be achieved by attachment of bicyclic amines to the pyrrolidinomethyl group.163... [Pg.130]

The enantioselectivity is due to the retention of the chiral sparteine in the lithiated reagent. The adducts have been used to synthesize a number of pyrrolidine and piperidine derivatives. [Pg.198]

Analogous rearrangement occurs under much milder conditions when the reactant is a zwitterion generated by deprotonation of an acylammonium ion. Substituted pyrrolidines were used as the chiral auxiliary, with the highest enantioselectivity being achieved with a 2-TBDMS derivative.267... [Pg.578]

We became interested in a disconnection between the pyrrolidine and the aryl group (Approach D) as the most convergent method for enantioselective construction of 12 [10]. Although (-)-sparteine mediated enantioselective lithiation of N-Boc pyrrolidine 19 is well established by Beak [11], arylation of the resulting chiral... [Pg.227]

Scheme 8.11 Enantioselective coupling of N-Boc pyrrolidine with aryl bromide 3. Scheme 8.11 Enantioselective coupling of N-Boc pyrrolidine with aryl bromide 3.
The key to the success of the synthesis was the development of a novel method for enantioselective formation of a-arylpyrrolidines. In this method, (-)-sparteine-mediated, enantioselective lithiation of N-Boc-pyrrolidine 19 was followed by an in situ transmetallation to zinc and Pd-catalyzed coupling reaction with aryl bromide 3, which afforded 2-arylpyrrolidine in 63% isolated yield and 92% ee. Notably, the acidic aniline NH2 group was tolerated under the coupling reaction conditions. [Pg.232]

Having demonstrated a practical and reliable method to access 2-arylpyrrolidines in high enantioselectivity, we felt that a noteworthy extension of this methodology would lie in its application to bis-arylated products 27, providing a rapid and efficient approach to enantiopure C2-symmetric 2,5-diarylpyrrolidines, which have been identified as valuable chiral auxiliaries and chiral ligand manifolds [29]. Towards this end, substrate 26a was subjected to the standard arylation conditions, which produced 2,5-diphenyl-N-Boc-pyrrolidine 27 in a 96 4 diastereomeric ratio, and 57% isolated yield (s-BuIi/TMEDA produced 27 in lower d.r. (66 34) and yield (42%)), as depicted in Scheme 8.13. [Pg.234]

An enantioselective variant of the diene cydization reaction has been developed by application of chiral zirconocene derivatives, such as Brintzinger s catalyst (12) [10]. Mori and co-workers demonstrated that substituted dial-lylbenzylamine 25 could be cyclized to pyrrolidines 26 and 27 in a 2 1 ratio using chiral complex 12 in up to 79% yield with up to 95% ee (Eq. 4) [ 17,18]. This reaction was similarly applied to 2-substituted 1,6-dienes, which provided the analogous cyclopentane derivatives in up to 99% ee with similar diastereoselectivities [19]. When cyclic, internal olefins were used, spirocyclic compounds were isolated. The enantioselection in these reactions is thought to derive from either the ate or the transmetallation step. The stereoselectivity of this reaction has been extended to the selective reaction of enantiotopic olefin compounds to form bicyclic products such as 28, in 24% yield and 59% ee after deprotection (Eq. 5) [20]. [Pg.223]

Recently, the research groups of Enders (Eq. 8.38)61 and Barluenga (Eq. 8.39)62 reported on the cycloaddition of chiral 2-aminobutadiene and described elegant solutions to the stereochemistry problems (regio-, diastereo-, and enantioselectivity). The reaction of 2-[(5)-2-methoxymethyl]pyrrolidin-l-yl]buta-l,3-diene with various 2-aryl-1-nitroethenes produces after hydrolysis 5-aryl-2-methyl-substituted 4-nitrocyclohexanones in excellent enantiomeric purity (ee = 75-95%) and with high diastereoselectivity (ds = 75-95%).61... [Pg.248]

The highly enantioselective reductive animation of a-keto acids as a route to amino acids is possible with ligand 118 (3 R,4R)- l-W-benzyl)-3,4-bis(diphenylphosphanyl)pyrrolidine, DEGUPHOS] and [Rh(cod)2]BF4.649 (R,R)-NORPHOS (2-exo-3-endo-bis(diphenylphosphino)bicyclo[2.2.1 ]heptene) and (2. S, 3. S ) - C HIR AP H O S (bis(diphenylphosphino)butane) are also good ligands for this transformation. Arylpyruvic acids give the best results (>95% ee). [Pg.115]

Nagel, U., Rieger, B., and Bublewitz, A., Enantioselective catalysis. VII. Complexes from [P(R/S),3R,4R,P (R,S)]-3,4-bis(phenylphosphino)pyrrolidine. Preparation of optically pure 1,2-biphosphine ligands with four stereocenters containing additional functional groups, /. Organomet. Chem., 370, 223, 1989. [Pg.109]


See other pages where Pyrrolidine enantioselectivity is mentioned: [Pg.1154]    [Pg.1154]    [Pg.599]    [Pg.1154]    [Pg.1154]    [Pg.599]    [Pg.214]    [Pg.185]    [Pg.23]    [Pg.91]    [Pg.262]    [Pg.103]    [Pg.122]    [Pg.256]    [Pg.300]    [Pg.368]    [Pg.579]    [Pg.232]    [Pg.232]    [Pg.233]    [Pg.234]    [Pg.235]    [Pg.290]    [Pg.290]    [Pg.169]    [Pg.535]    [Pg.232]   
See also in sourсe #XX -- [ Pg.81 ]




SEARCH



Enantioselective pyrrolidine formation

© 2024 chempedia.info