Process solvents containing metallic

In conclusion, the above surface film formation processes are expected to occur with all types of the carbons mentioned (including doped diamonds and fullerenes) in nonaqueous solvents containing metal ion salts. Hence, when carbon electrodes are utilized for electroanalysis or electrosynthesis in such solutions at low potentials, they should be considered as modified electrodes covered with surface films that are, at least partially, electronic insulators (but may be ion conductors). 

Oxygen, in the air, is probably the cheapest, most readily available oxidant and so it is not suprising that industrial processes using this reagent for the oxidation of sulphoxides has been patented. These procedures involve the use of transition metal ion catalysts " in solvents containing acetic acid , acetone and carboxylic acids . 

Silver chloride is a common source and intermediate product in many extractive metallurgical processes, for example it occurs in the anode slimes from copper refineries, the residues of leaching processes for base metals, as a product of the chlorination of impure gold—silver bullion, and in photographic waste. A novel process for the leaching and purification of silver chloride, which was devised by Parker et a/.,26 is based on the observation that silver chloride is very soluble in some dipolar aprotic solvents containing chloride ion but is much less soluble when water is present. The very different behaviour of the equilibrium... 

Similar to the behavior of nonactive metal electrodes described above, when carbon electrodes are polarized to low potentials in nonaqueous systems, all solution components may be reduced (including solvent, cation, anion, and atmospheric contaminants). When the cations are tetraalkyl ammonium ions, these reduction processes may form products of considerable stability that dissolve in the solution. In the case of alkali cations, solution reduction processes may produce insoluble salts that precipitate on the carbon and form surface films. Surface film formation on both carbons and nonactive metal electrodes in nonaqueous solutions containing metal salts other than lithium has not been investigated yet. However, for the case of lithium salts in nonaqueous solvents, the surface chemistry developed on carbonaceous electrodes was rigorously investigated because of the implications for their use as anodes in lithium ion batteries. We speculate that similar surface chemistry may be developed on carbons (as well as on nonactive metals) in nonaqueous systems at low potentials in the presence of Na+, K+, or Mg2+, as in the case of Li salt solutions. The surface chemistry developed on graphite electrodes was extensively studied in the following systems ... 

IT at the liquid/liquid interface can be probed using a micropipet tip (7,46). Two types of IT processes, i.e., facilitated and simple IT, require different treatments. In the first case, an aqueous solution in the pipet contains some ion, e.g., a metal cation (M+). The micropipet is immersed in organic solvent containing dissolved ionophore, R, capable of complexing the ion of interest. The facilitated IT reaction at the micropipet tip is... 

---