Process legal requirements

Systems governing legally required processes are, of course, more likely to be formal and documented. If you find a one-to-one correspondence, this may suggest that your company tends toward an informal approach to management systems, documenting them only as they apply to mandatory processes. If you find formal documentation of a number of systems that support discretionary activities, this may indicate that your compands style requires more structure. 

The aim of process design is to create a process, which is profitable, economic, safe, environmentally benign and user friendly. This is achieved by the optimization of process alternatives according to economic and functional criteria. It is required that the safety of a process plant fulfills a certain required level. This is because of general legal requirements, company image, and also due to economic reasons, since an unsafe plant cannot be profitable due to losses of production and capital. 

There are certain legal requirements and standards which cover the manufacture, processing, storage and quality of some foodstuffs.10 In general, these requirements do not cover composition in any detail except in the case of milk products. 

In this chapter, a plan for prescribing is presented. The physical form of the prescription, common prescribing errors, and legal requirements that govern various features of the prescribing process are then discussed. Finally, some of the social and economic factors involved in prescribing and drug use are described. 

What are the main advantages/disadvantages of this model as compared to the traditional sales concept Influence on the application of the procedural plant which increases live expectancy pressure at the market. No initial investment at user s side and a most reliable process without requiring an expert. The supplier satisfies all legal formalities with the authorities referring to the laws and environmental regulations. ... 

Standardization of the milk fat and total solids contents of milk is accomplished by blending cream or skim milk with separated milk. Modern technology has developed continuous standardization processes that use turbidity or infrared absorption measuring devices to monitor and adjust the composition of the product as it leaves the separator. It is important that milk be accurately standardized to meet governmental legal requirements and to manufacture dairy products with optimal functional and quality attributes. 

According to 21CFR 211.110(a), pharmaceutical manufacturers are legally required to demonstrate the adequacy of mixing to ensure uniformity of in-process powder blends and finished dosage units. The uniformity of dose unit is usually a product specification for oral solid dosage forms and is tested to ensure it meets the compendial acceptance criteria. 

Quality Raw Material" is an expression that has to be defined by the individual user of a raw material, for specific production processes and for the production objectives, i.e. for every product. The "quality", i.e. the required physical/chemical parameters of a raw material vary and are product specific however if it comes to product safety, there is no room for interpretation. Our products must be safe and fulfill all legal requirements given in a specific country or imposed by international regulations. 

---