Preventive procedures safety sampling

When you are dealing with sites where agents have been applied, personnel safety and your is your highest priority. Special clothing, respiratory protection, sample collection and analyses procedures and decontamination procedures are all required before one begins characterization and any site work. The possibility of accidental exposure and accident prevention has to be continually considered. 

Commercial PET films can be melted in a microscopy hot stage (Tm 260°C) and are then quenched to liquid nitrogen temperatures by dipping the sample into liquid nitrogen. Careful Do wear suitable safety glasses, lab coat, gloves and further equipment to prevent contact with the liquid nitrogen This procedure efficiently quenches the melt to the amorphous phase (Tg 75°C). 

When safety and loss prevention professionals are confronted with unique problems, the analysis process required to identify potential solutions can often be complex the first few times it is tried. Below is a sample procedure that can be used when addressing problems ... 

Cosmetics are not subject to registration or notification, there are pre-shipment testing procedures in force, based on mandatory SASO standards applied equally to both imported and domestically produced products. These encompass the protection of health, safety, national security, public morals, the environment and prevention of deceptive practices. For imported cosmetics, procedures to ensure conformity to the appUcable Saudi standards are enforced by the Ministry of Commerce and Industry, which implements the International Conformity Certification Program (ICCP) as a combined conformity assessment, inspection and certification scheme, on the basis of which goods are allowed entry into the KSA. Compliance with the relevant Saudi standards, or approved equivalent international alternatives, leads to the issue of a Certificate of Conformity (CoC) prior to shipment by Country Offices or Regional Licensing Centres. The ICCP apphes to all consumer products exported to the KSA (KSA, 2004). Samples may be selected for minimum verification tests as a part of annual routine inspections. Periodic pre-shipment inspection will be performed. 

---