Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Power, sustainable

Spitzley, D. V., Brunetti, T. A. and Vigon, B. W. (2000). Assessing Fuel Cell Power Sustainability. SAE Technical Papers, No. 2000-01-1490. SAE International. [Pg.270]

When making the run, hydrogen was fed into the reactor at a definite flow rate and the electric discharge was applied to heat the reactor. When the reactor temperature was stabilized at 300°C., the feed of the organic compound was started. The discharge power sustained for the reaction was in a range from 140 to 170 watts. [Pg.324]

We believe that the combination of challenges—low power, sustainability, manageabihty, reliability, and costs—is likely to influence how we think about... [Pg.29]

The burning of the ligneous portion of the black Hquor produces sufficient heat in the furnace to sustain flash drying of residual moisture, salt-cake reduction, and chemical smelting. The heat in the gas passing through the furnace, boiler, and economi2er produces steam for power and process. [Pg.146]

In principle, after initiation the laser should be operatable purely by chemical reaction, without any external sources of electrical power. In practice, most chemical lasers do use a sustaining source of electrical power. [Pg.11]

Fig. 2. Sources of potential biological damage in the immediate vicinity of a power station cooling system where the condenser may sustain mechanical... Fig. 2. Sources of potential biological damage in the immediate vicinity of a power station cooling system where the condenser may sustain mechanical...
Phenylephrine. Phenylephrine hydrochloride is an a -adrenoceptor agonist. Phenylephrine produces powerful vasoconstrictor and hypertensive responses. This results in baroreceptor activation of a reflex bradycardia and thus is useful in the treatment of supraventricular tachyarrhythmias. Unlike epinephrine [51-43-4] the actions of which are relatively transient, phenylephrine responses are more sustained (20 min after iv dosing and 50 min after subcutaneous dosing) (86). [Pg.120]

Cross-flow-elec trofiltratiou (CF-EF) is the multifunctional separation process which combines the electrophoretic migration present in elec trofiltration with the particle diffusion and radial-migration forces present in cross-flow filtration (CFF) (microfiltration includes cross-flow filtration as one mode of operation in Membrane Separation Processes which appears later in this section) in order to reduce further the formation of filter cake. Cross-flow-electrofiltratiou can even eliminate the formation of filter cake entirely. This process should find application in the filtration of suspensions when there are charged particles as well as a relatively low conduc tivity in the continuous phase. Low conductivity in the continuous phase is necessary in order to minimize the amount of elec trical power necessaiy to sustain the elec tric field. Low-ionic-strength aqueous media and nonaqueous suspending media fulfill this requirement. [Pg.2008]

Steady-state regulation is the change in sustained speed or pressure (expressed as a percentage of rated) when power or flow output is gradually reduced from rated value to zero. [Pg.2498]

The use of inadiation or electron bombardment offers an alternative approach to molecular dissociation to the use of elevated temperamres, and offers a number of practical advantages. Intensive sources of radiation in the visible and near-visible are produced by flash photolysis, in which a bank of electrical capacitors is discharged tlrrough an inert gas such as ktypton to produce up to 10 joule for a period of about 10 " s, or by the use of high power laser beams (Eastham, 1986 (loc.cit.)). A more sustainable source of radiation is obtained from electrical discharge devices usually incorporating... [Pg.72]

It has been emphasised in the earlier chapters that the thermal efficiency of the gas turbine increases with its maximum nominal temperature, which was denoted as T. Within limits this statement is true for all gas turbine-based cycles and can be sustained, although not indefinitely, as long as the optimum pressure ratio is selected for any value of Ty, further the specific power increases with T. However, in practice higher maximum temperature requires improved combustion technology, particularly if an increase in harmful emissions such as NO is to be avoided. [Pg.47]


See other pages where Power, sustainable is mentioned: [Pg.163]    [Pg.164]    [Pg.235]    [Pg.105]    [Pg.118]    [Pg.27]    [Pg.187]    [Pg.394]    [Pg.163]    [Pg.164]    [Pg.235]    [Pg.105]    [Pg.118]    [Pg.27]    [Pg.187]    [Pg.394]    [Pg.207]    [Pg.388]    [Pg.122]    [Pg.154]    [Pg.191]    [Pg.512]    [Pg.16]    [Pg.313]    [Pg.212]    [Pg.214]    [Pg.223]    [Pg.291]    [Pg.42]    [Pg.142]    [Pg.9]    [Pg.493]    [Pg.1668]    [Pg.14]    [Pg.66]    [Pg.275]    [Pg.522]    [Pg.583]    [Pg.803]    [Pg.81]    [Pg.610]    [Pg.389]    [Pg.390]    [Pg.515]    [Pg.351]    [Pg.206]    [Pg.420]   
See also in sourсe #XX -- [ Pg.132 ]




SEARCH



Renewable sources, sustainable power

Sources, sustainable power from

Sources, sustainable power from renewable

Sustainable energy solar power

Sustainable energy sources wind power

Sustainable power from renewable

The challenge of sustainable development — a potentially expanded role for nuclear power

© 2024 chempedia.info