Potential of PH

A similar situation obtains in a series of para-substituted tribenzylbor-anes (48) bearing X = H, F, Me, and MeO groups47 the UV spectra of 48 exhibit a CT band of medium intensity in the region of 240-285 nm. Such an assignment is supported by the existence of a linear correlation of the CT transition energies of the boranes with the ionization potentials of Ph—X (Eq. 16). 

These effects can be illustrated more quantitatively. The drop in the magnitude of the potential of mica with increasing salt is illustrated in Fig. V-7 here yp is reduced in the immobile layer by ion adsorption and specific ion effects are evident. In Fig. V-8, the pH is potential determining and alters the electrophoretic mobility. Carbon blacks are industrially important materials having various acid-base surface impurities depending on their source and heat treatment. 

Fig. V-7. f potential of muscovite mica versus electrolyte concentration at pH 5.8 0.3. (From Ref. 76.)...

Fig. XIII-9. The dependence of the flotation properties of goethite on surface charge. Upper curves are potential as a function of pH at different concentrations of sodium chloride lower curves are the flotation recovery in 10 M solutions of dodecylammo-nium chloride, sodium dodecyl sulfate, or sodium dodecyl sulfonate. (From Ref. 99.)...

Figure Al.4.6. A cross-section of the potential energy surface of PH. The coordinate p is defined in figure Al.4.5.

Protems can be physisorbed or covalently attached to mica. Another method is to innnobilise and orient them by specific binding to receptor-fiinctionalized planar lipid bilayers supported on the mica sheets [15]. These surfaces are then brought into contact in an aqueous electrolyte solution, while the pH and the ionic strength are varied. Corresponding variations in the force-versus-distance curve allow conclusions about protein confomiation and interaction to be drawn [99]. The local electrostatic potential of protein-covered surfaces can hence be detemiined with an accuracy of 5 mV. 

The diagram gives regions of existence, i.e. for a particular combination of pH and redox potential it can be predicted whether it is thennodynamically favourable for iron to be inert (stable) (region A), to actively dissolve (region B) or to fonn an oxide layer (region C). 

The data in Tables 4.2 and 4.3 refer to ions in aqueous acid solution for cations, this means effectively [MlHjO), ]" species. However, we have already seen that the hydrated cations of elements such as aluminium or iron undergo hydrolysis when the pH is increased (p. 46). We may then assume (correctly), that the redox potential of the system... 

When either hydrogen ions or hydroxide ions participate in a redox half-reaction, then clearly the redox potential is alTected by change of pH. Manganate(Vir) ions are usually used in well-acidified solution, where (as we shall see in detail later) they oxidise chlorine ions. If the pH is increased to make the solution only mildly acidic (pH = 3-6), the redox potential changes from 1.52 V to about 1.1 V, and chloride is not oxidised. This fact is of practical use in a mixture of iodide and chloride ions in mildly acid solution. manganate(VII) oxidises only iodide addition of acid causes oxidation of chloride to proceed. 

Stannate(II) ions are powerful reducing agents. Since, for tin, the stability of oxidation state -b4 is greater than that of oxidation state -b2, tin(II) always has reducing properties, but these are greater in alkaline conditions than in acid (an example of the effect of pH on the redox potential, p. 101). 

The potential of a redox reaction for a specific set of solution conditions, such as pH and ionic composition. 

Although there are only three principal sources for the analytical signal—potential, current, and charge—a wide variety of experimental designs are possible too many, in fact, to cover adequately in an introductory textbook. The simplest division is between bulk methods, which measure properties of the whole solution, and interfacial methods, in which the signal is a function of phenomena occurring at the interface between an electrode and the solution in contact with the electrode. The measurement of a solution s conductivity, which is proportional to the total concentration of dissolved ions, is one example of a bulk electrochemical method. A determination of pH using a pH electrode is one example of an interfacial electrochemical method. Only interfacial electrochemical methods receive further consideration in this text. 

Equations 11.19-11.21 are defined for a potentiometric electrochemical cell in which the pH electrode is the cathode. In this case an increase in pH decreases the cell potential. Many pH meters are designed with the pH electrode as the anode so that an increase in pH increases the cell potential. The operational definition of pH then becomes... 

Fig. 5a. Standard (or formal) reduction potentials of actinium and the actinide ions in acidic (pH 0) and basic (pH 14) aqueous solutions (values are in volts...

Accuracy and Interpretation of Measured pH Values. The acidity function which is the experimental basis for the assignment of pH, is reproducible within about 0.003 pH unit from 10 to 40°C. If the ionic strength is known, the assignment of numerical values to the activity coefficient of chloride ion does not add to the uncertainty. However, errors in the standard potential of the cell, in the composition of the buffer materials, and ia the preparatioa of the solutioas may raise the uacertaiaty to 0.005 pH unit. 

The measurement of pH using the operational ceU assumes that no residual Hquid-junction potential is present when a standard buffer is compared to a solution of unknown pH. Although this may never be stricdy tme, especially for complex matrices, the residual Hquid-junction potential can be minimised by the appropriate choice of a salt-bridge solution and caHbration buffer solutions. 

Fig. 7. Dependence of zeta potential on pH for a typical metal hydroxide particle ia water. The isoelectric pH (pH ) is at low pH for acidic hydroxides and...

Aqueous solutions of sodium sulfite are alkaline and have a pH of ca 9.8 at 1 wt %. The solutions are oxidized readily by air. The redox potential is a function of pH, as would be expected from the foUowing equation ... 

Addition of sodium dithionite to formaldehyde yields the sodium salt of hydroxymethanesulfinic acid [79-25-4] H0CH2S02Na, which retains the useful reducing character of the sodium dithionite although somewhat attenuated in reactivity. The most important organic chemistry of sodium dithionite involves its use in reducing dyes, eg, anthraquinone vat dyes, sulfur dyes, and indigo, to their soluble leuco forms (see Dyes, anthraquinone). Dithionite can reduce various chromophores that are not reduced by sulfite. Dithionite can be used for the reduction of aldehydes and ketones to alcohols (348). Quantitative studies have been made of the reduction potential of dithionite as a function of pH and the concentration of other salts (349,350). 

For vanadium solvent extraction, Hon powder can be added to reduce pentavalent vanadium to quadrivalent and trivalent Hon to divalent at a redox potential of —150 mV. The pH is adjusted to 2 by addition of NH, and an oxyvanadium cation is extracted in four countercurrent stages of mixer—settlers by a diesel oil solution of EHPA. Vanadium is stripped from the organic solvent with a 15 wt % sulfuric acid solution in four countercurrent stages. Addition of NH, steam, and sodium chlorate to the strip Hquor results in the precipitation of vanadium oxides, which are filtered, dried, fused, and flaked (22). Vanadium can also be extracted from oxidized uranium raffinate by solvent extraction with a tertiary amine, and ammonium metavanadate is produced from the soda-ash strip Hquor. Fused and flaked pentoxide is made from the ammonium metavanadate (23). 

---