Potassium storage

Potassium Phosphates. Potassium phosphate salts are analogous to the sodium salts and share many of the same functional properties. The higher cost of potassium hydroxide has restricted these salts to appHcations where high solubiUty or nutrient value is important. Potassium salts are manufactured like their sodium analogues, often on the same equipment. Many of the potassium phosphates are more deflquescent than their sodium analogues and may require special storage and moistureproof containers. 

Potassium Alkoxides. The most widely used potassium bases are potassium tert-hu. oAde [865-47-4] (KTB) and potassium / i -amylate [41233-93-6] (KTA). These strong alkoxide bases offer such advantages as base strength (pX = 18), solubiUty (Table 5), regio/stereoselectivity because of bulky alkyl groups, and stabiUty because of the lack of a-protons. On storage, KTB and KTA have long shelf Hves under inert atmosphere (see... 

Potassium 3-aniinopropylaniide [56038-00-7] (KAPA), KNHCH2CH2CH2-NH2, pX = 35, can be prepared by the reaction of 1,3-diaminopropane and potassium metal or potassium hydride [7693-26-7] (57—59). KAPA powder has been known to explode during storage under nitrogen in a drybox, and is therefore made in situ. KAPA is extremely effective in converting an internal acetylene or aHene group to a terminal acetylene (60) (see Acetylene-DERIVED chemicals). 

Sorbic acid and its salts are highly refined to obtain the necessary purity for use in foods. The quaUty requirements are defined by the Food Chemicals Codex (Table 3). Codistillation or recrystaUization from water, alcohoHc solutions, or acetone is used to obtain sorbic acid and potassium sorbate of a purity that passes not only the Codex requirements but is sufficient for long-term storage. Measurement of the peroxide content and heat stabiUty can further determine the presence of low amounts of impurities. The presence of isomers, other than the trans,trans form, causes instabiUty and affects the melting point. 

Sodium and Potassium Benzoate. These salts are available in grades meeting the specifications of the 25ationalVormulary (18) and the Vood Chemicals Codex (19) (Table 7). Sodium benzoate [532-32-1] is produced by the neutralization of benzoic acid with caustic soda and/or soda ash. The resulting solution is then treated to remove trace impurities as weU as color bodies and then dried in steam heated double dmm dryers. The product removed from the dryers is light and fluffy and in order to reduce shipping and storage space the sodium benzoate is normally compacted. It is then milled and classified into various product forms, the names of which often bear Httle relationship to the actual form of the product. 

Lithium Hypochlorite. High purity, anhydrous lithium hypochlorite [13840-33-0] LiOCl, is a white, lightweight, dusty, hygroscopic, and corrosive powder. The monohydrate is free-flowing, nondusty, and of reasonable density. The presence of diluents such as salt, sodium, and potassium sulfates reduces dustiness, increases bulk density, reduces reactivity, and improves storage stabiUty. The commercial product is marketed in this form. 

Metbyl-l-pentene [763-29-1] M 84.2, b 61.5-62", d 0.680, n 1.395. Water was removed, and peroxide formation prevented by several vacuum distns from sodium, followed by storage with sodium-potassium alloy. 

BATTERY, ELECTRIC, STORAGE, DRY, CONTAINING POTASSIUM HYDROXIDE 1813 ... 

Mercaptan extraction is used to reduce the total sulfur content of the fuel. When potassium isobutyrate and sodium cresylate are added to caustic soda, the solubility of the higher mercaptans is increased and they can be extracted from the oil. To remove traces of hydrogen sulfide and alkyl phenols, the oil is pretreated with caustic soda in a packed column or other mixing device. The mixture is allowed to settle and the product water washed before storage. 

Then, 1-(3-acetylthio-2-methylpropanoyl)-L-proline is produced. The 1-(3-acetylthio-3-methyl-propanoyl)-L-proline tert-butyl ester (7.8 g) is dissolved in a mixture of anisole (55 ml) and trifluoroacetic acid (110 ml). After one hour storage at room temperature the solvent Is removed in vacuo and the residue is precipitated several times from ether-hexane. The residue (6.8 g) is dissolved in acetonitrile (40 ml) and dicyclohexylamine (4.5 ml) is added. The crystalline salt is boiled with fresh acetonitrile (100 ml), chilled to room temperature and filtered, yield 3 g, MP 187°C to 188°C. This material is recrystallized from isopropanol [ttlo -67° (C 1.4, EtOH). The crystalline dicyclohexylamine salt is suspended in a mixture of 5% aqueous potassium bisulfate and ethyl acetate. The organic phase is washed with water and concentrated to dryness. The residue is crystallized from ethyl acetate-hexane to yield the 1-(3-acetylthio-2-D-methylpropanoyl-L-proline, MP83°Cto 85°C. 

The indicator solution is prepared by dissolving 0.5 g of xylenol orange in 100 mL of water. For storage it is best kept as a solid mixture with potassium nitrate (page 316). 

---