Potassium carbonate, synthesis with

Potassium carbonate Synthesis of heterocyclics with 1-sulfonyl-l-isonitriles Oxazoles from 0x0 compds. 

In this preparation, phenyi-2-nitropropene is reduced to phenyl-2-nitropropane with sodium borohydride in methanol, followed by hydrolysis of the nitro group with hydrogen peroxide and potassium carbonate, a variety of the Nef reaction. The preparation is a one-pot synthesis, without isolation of the intermediate. 

Hexa.cya.no Complexes. Ferrocyanide [13408-63 ] (hexakiscyanoferrate-(4—)), (Fe(CN) ) , is formed by reaction of iron(II) salts with excess aqueous cyanide. The reaction results in the release of 360 kJ/mol (86 kcal/mol) of heat. The thermodynamic stabiUty of the anion accounts for the success of the original method of synthesis, fusing nitrogenous animal residues (blood, horn, hides, etc) with iron and potassium carbonate. Chemical or electrolytic oxidation of the complex ion affords ferricyanide [13408-62-3] (hexakiscyanoferrate(3—)), [Fe(CN)g] , which has a formation constant that is larger by a factor of 10. However, hexakiscyanoferrate(3—) caimot be prepared by direct reaction of iron(III) and cyanide because significant amounts of iron(III) hydroxide also form. Hexacyanoferrate(4—) is quite inert and is nontoxic. In contrast, hexacyanoferrate(3—) is toxic because it is more labile and cyanide dissociates readily. Both complexes Hberate HCN upon addition of acids. 

Nucleophilic Substitution Route. Commercial synthesis of poly(arylethersulfone)s is accompHshed almost exclusively via the nucleophilic substitution polycondensation route. This synthesis route, discovered at Union Carbide in the early 1960s (3,4), involves reaction of the bisphenol of choice with 4,4 -dichlorodiphenylsulfone in a dipolar aprotic solvent in the presence of an alkaUbase. Examples of dipolar aprotic solvents include A/-methyl-2-pyrrohdinone (NMP), dimethyl acetamide (DMAc), sulfolane, and dimethyl sulfoxide (DMSO). Examples of suitable bases are sodium hydroxide, potassium hydroxide, and potassium carbonate. In the case of polysulfone (PSE) synthesis, the reaction is a two-step process in which the dialkah metal salt of bisphenol A (1) is first formed in situ from bisphenol A [80-05-7] by reaction with the base (eg, two molar equivalents of NaOH),... 

NMP are examples of suitable solvents for PES and PPSF polymerizations. Chlorobenzene or toluene are used as cosolvents at low concentrations. These cosolvents form an azeotrope with water as they distill out of the reaction mixture, thereby keeping the polymerization medium dehydrated. Potassium carbonate is a suitable choice for base. The synthesis of PES and PPSE differ from the PSE case in that the reaction is carried out in a single-step process. In other words, the formation of the dipotassium salt of the bisphenol is not completed in a separate first step. Equations 2 and 3 represent polymerizations based on the dipotassium salts of bisphenol S and biphenol to make PES and PPSE, respectively. 

An alternative synthesis route for PES involves the partial hydrolysis of dichlorodiphenyl sulfone (2) with base to produce 4-chloro-4 -hydroxydiphenylsulfone [7402-67-7] (3) followed by the polycondensation of this difimctional monomer in the presence of potassium hydroxide or potassium carbonate (7). 

Another synthesis of the cortisol side chain from a C17-keto-steroid is shown in Figure 20. Treatment of a C3-protected steroid 3,3-ethanedyidimercapto-androst-4-ene-ll,17-dione [112743-82-5] (144) with a tnhaloacetate, 2inc, and a Lewis acid produces (145). Addition of a phenol and potassium carbonate to (145) in refluxing butanone yields the aryl vinyl ether (146). Concomitant reduction of the C20-ester and the Cll-ketone of (146) with lithium aluminum hydride forms (147). Deprotection of the C3-thioketal, followed by treatment of (148) with y /(7-chlotopetben2oic acid, produces epoxide (149). Hydrolysis of (149) under acidic conditions yields cortisol (29) (181). 

The reaction of appropriate 1,3-diketones (302) with hydroxylamine hydrochloride in pyridine (79MI41601) has been reported to result in a regiospecific synthesis of 3-alkyl-5-arylisoxazoles, as has the reaction of an a -bromoenone (307) with hydroxylamine hydrochloride in ethanol in the presence of potassium carbonate (81H(16)145). Regiospecific syntheses of 5-alkyl-3-phenylisoxazoles also result from the reaction of an a-bromoenone (307) with hydroxylamine in the presence of sodium ethoxide (81H(16)145). 3-Aryl-5-methylisoxazoles were prepared from phosphonium salts (304) and hydroxylamine (80CB2852). 

For the classical Williamson synthesis an alcohol is initially reacted with sodium or potassium to give an alkoxide, e.g. 1. Alternatively an alkali hydroxide or amide may be used to deprotonate the alcohol. Phenols are more acidic, and can be converted to phenoxides by treatment with an alkali hydroxide or with potassium carbonate in acetone. ... 

In semiindustrial synthesis, to achieve better yields, it is possible to omit (A), by directly preparing the ester (B) by reaction of p-hydroxy acetophenone on ethyl 2-bromoacetate in the presence of potassium carbonate in butanone. The yield of ester is 90%, and elimination of excess of p-hydroxyacetophenone is effected by washing with sodium hydroxide. 

Many reactions have been shown to benefit from irradiation with ultrasound (ref. 19). We therefore decided to investigate the effect of ultrasound, different catalysts and the presence of solids on Ullmann diaryl ether synthesis. Indeed, sonication of mixtures of a phenol and a bromoaromatic compound, in the absence of solvent and presence of copper (I) iodide as catalyst and potassium carbonate as base, produces good yields of diaryl ethers at relatively low temperatures (Fig. 10) (ref 20). 

The approach also allows the synthesis of furans by employing ethoxymethylene malonate, followed by an eliminative decarboxylation. This method was used by Balme for a formal synthesis of the antitumor lignan burseran (6/1-294), starting from 6/1-290,6/1-291 and 6/1-292 via the furan 6/1-293 (Scheme 6/1.78) [139], Furans as 6/1-298 can also be obtained by Pd-catalyzed reaction of 2-propynyl-l,3-dicarbonyls 6/1-295 with aryl halides 6/1-296 in DMF, using potassium carbonate as base, as shown by Arcadi, Cacchi and coworkers (Scheme 6/1.79) [140]. 

Horne has used a potassium carbonate-mediated rearrangement of 494 to 495 in a synthesis of dibromoisophakellin <2002TL5135>. However, the authors do not comment on the mechanistic explanation of this, but the reaction proceeds in 40% yield with recovery of starting material (Equation 131). 

In a more recent study, Wang and coworkers have discussed microwave-assisted Suzuki couplings employing a reusable polymer-supported palladium complex [141]. The supported catalyst was prepared from commercial Merrifield polystyrene resin under ultrasound Bonification. In a typical procedure for biaryl synthesis, 1 mmol of the requisite aryl bromide together with 1.1 equivalents of the phenyl-boronic acid, 2.5 equivalents of potassium carbonate, and 10 mg of the polystyrene-... 

Alkylation of 31 with dibromomethane and 1,2-dibromoethane was performed under solvent-PTC conditions with good yields and short irradiation times (15 min) [16]. The synthesis of original benzimidazo-[l,2-c]-quinazoline dimers 32(a,b) was successfully achieved by use of potassium carbonate in the microwave active DMF solvent (Scheme 8.13). 

An easy synthesis of the 2-oxo-2,3-dihydro-l/7-pyrrolo[l,2- ]pyrazole system can be performed by reaction of 1,2-diaza-1,3-butadienes 33 with dialkyl 1,3-acetonedicarboxylate 34 in the presence of potassium carbonate. At first, 1-aminopyrroles 36 was produced by dehydration in the presence of copper(n) trifluoromethanesulfonate. Treatment of these compounds with sodium hydride led to ATZ-substituted 2-oxo-2,3-dihydro-17/-pyrrolo[l,2-A]pyrazole 38. Under the same reaction conditions, and after acidic treatment, NH-BOC-protected 1-aminopyrrole was transformed to NH-unsubstituted 2-oxo-2,3-dihydro-l//-pyrrolo[l,2-A]pyrazole 37 (BOC =/-butylcarbonyl) (Scheme 1). 

The syntheses of 1 utilized the Ullmann ether synthesis.13 Reaction of 2 mol of 1-bromonaphthalene with 4,4-(hexafluoroisopropylidiene)diphenol afforded the desired product 1. The reaction was carried out in DM Ac at 160°C in the presence of potassium carbonate as the base and copper (I) iodine as the reaction catalyst to yield 1, as depicted in Scheme 1. The reaction proceeded slowly but in good yield with easy isolation of the desired compound. Acylation of 1 with 4-fluorobenzoyl chloride to prepare 2 was carried out under modified Friedel-Crafts reaction conditions14 using dimethyl-sulfone as catalyst moderator. Both 1 and 2 were easily recrystallized to yield high-purity monomers suitable for polymerizations. 

Similarly, 1,4-conjugated addition (242) of lithium divinylcyanocuprate to 238 gave the adduct 239, which on treatment with potassium carbonate in methanol produced the epoxide 240, a key intermediate for the synthesis of the carbocycline 241 through highly stereoselective processes. 

---