Positioning techniques, scanning electrochemical

The scanning electrochemical microscopy (SECM) technique introduced in recent years by Allen Bard is another area where the smallness of the electrode is essential [38]. The principle in SECM is a mobile UME inserted in an electrolyte solution. The UME is normally operated in a potentiostatic manner in an unstirred solution so that the current recorded is controlled solely by the spherical diffusion of the probed substance to the UME. The current can be quantified from Eqs. 48, 49, or 89 as long as the electrode is positioned far from other interfaces. However, if a solid body is present in the electrolyte solution, the diffusion of the substance to the UME is altered. For instance, when the position of the UME is lowered in the z direction, that is, towards the surface of the object, the diffusion will be partially blocked and the current decreases. By monitoring of the current while the electrode is moved in the x-y plane, the topology of the object can be graphed. The spatial resolution is about 0.25 pm. In one investigation carried out by Bard et al, the... 

A few years ago Bard and his group developed the technique called scanning electrochemical microscopy (SECM) which makes possible a spatial analysi,s of charge transfer processes [9]. In this method an additional tip electrode of a diameter of about 2 pm is used as well as the three other electrodes (semiconductor, counter and reference electrode). Assuming that a redox system is reduced at the semiconductor, then the reduced species can be re-oxidized at the tip electrode, the latter being polarized positively with respect to the redox potential. The corresponding tip current / [ is proportional to the local concentration of the product formed at the semiconductor surface and therefore also to the corresponding local semiconductor current, provided... 

Scanning electrochemical microscopy (SECM, see Chapter 12) is another microelectrode technique that has been used at the cellular surface. Briefly, with SECM a microelectrode (UME, see Chapter 6) functions as a scanning probe that detects local electrochanical activity. When the UME is rastered over a sample, electrochemical data is recorded at multiple positions and an image is constructed based on the local electrochemical properties of the area of interest SECM has been thoroughly reviewed (19,20,52, Chapter 12 of this... 

Such effects are observed inter alia when a metal is electrochemically deposited on a foreign substrate (e.g. Pb on graphite), a process which requires an additional nucleation overpotential. Thus, in cyclic voltammetry metal is deposited during the reverse scan on an identical metallic surface at thermodynamically favourable potentials, i.e. at positive values relative to the nucleation overpotential. This generates the typical trace-crossing in the current-voltage curve. Hence, Pletcher et al. also view the trace-crossing as proof of the start of the nucleation process of the polymer film, especially as it appears only in experiments with freshly polished electrodes. But this is about as far as we can go with cyclic voltammetry alone. It must be complemented by other techniques the potential step methods and optical spectroscopy have proved suitable. 

Position, electrochemical technique (cv), number of cycles, scan rate (mV/s), start (vertex 1, vertex 2 and end) potential (mV)... 

Optional speed of pump (pl/s), pumped volume (pi) (up to sequentially added eight volumes), delay time between pumping events (s) Position, electrochemical technique (dpv), measuring time (s), applied base potential (mV), pulse height (mV), pulse time (ms), time between pulses (ms), scan rate (mV/s), start (vertex 1, vertex 2 and end) potential (mV)... 

Figure 4-3. Electrochemical techniques and the redox-linked chemistries of an enzyme film on an electrode. Cyclic voltammetry provides an intuitive map of enzyme activities. A. The non-turnover signal at low scan rates (solid lines) provides thermodynamic information, while raising the scan rate leads to a peak separation (broken lines) the analysis of which gives the rate of interfacial electron exchange and additional information on how this is coupled to chemical reactions. B. Catalysis leads to a continual flow of electrons that amphfles the response and correlates activity with driving force under steady-state conditions here the catalytic current reports on the reduction of an enzyme substrate (sohd hne). Chronoamperometry ahows deconvolution of the potenhal and hme domains here an oxidoreductase is reversibly inactivated by apphcation of the most positive potential, an example is NiFe]-hydrogenase, and inhibition by agent X is shown to be essentially instantaneous.

---