Polyurethanes aromatic polyether-based

Two thermoplastic elastomers (Bayer s Texin DP7-1049 and 990) were used for this work. Both materials were aromatic polyether-based thermoplastic polyurethane with similar melt viscosities and Shore hardness valnes of 45D and A90, respectively [19]. 

In order to demonstrate the use of laser flash photolysis in elucidation of the MDI based polyurethane photolysis mechanism, three polyurethanes, two aryl biscarbamate models, an aryl monocarbamate model, and an aromatic amine were selected. Two of the polyurethanes are based on MDI while the third is based on TDI (mixture of 2,4 and 2,6 isomers in 80/20 ratio). The MDI based polyurethanes all have the same basic carbamate repeat unit. The MDI elastomer (MDI-PUE) is soluble in tetrahydrofuran (THF). The simple polyurethane (MDI-PU) based on MDI and 1,4-butanediol is used in the tert-butoxy abstraction reactions since it does not contain a polyether backbone. (See page 47 for structures of polymers and models.)... 

The chemical participation of lignin macromonomers in polymerization or copolymerization reactions has been focussed mostly on the reactivity of both types of OH groups, and hence in the synthesis of polyesters, polyurethanes and polyethers, although some research has also dealt with their intervention through the unsubstituted aromatic sites in different formaldehyde-based resins in partial replacement of phenol [58, 59]. 

The most important oligo-polyols for rigid polyurethanes are polyether polyols and aromatic polyester polyols [1-4, 6]. The aromatic polyether polyols, based on condensates of aromatic compounds with aldehydes, become very important polyols, especially after the introduction of new blowing agents (see Chapter 21). 

Polyurethane-based FTPEs are produced by reacting fluorinated polyether diols with aromatic disocyanates. The resulting block copolymers contain fluorinated polyether soft segments.68 Another possible method of preparation of fluorinated TPE is dynamic vulcanization. Examples are a blend of a perfluoroplastic and a perfluoroelastomer containing curing sites or a combination of VDF-based fluo-roelastomers and thermoplastics, such as polyamides, polybutylene terephtalate, and polyphenylene sulhde.69 70... 

Thermoset polyurethanes are cross-linked polymers, which are produced by casting or reaction injection molding (RIM). For cast elastomers, TDI in combination with 3,3,-dichloro-4,4,-diphen5lmethanediamine (MOCA) are often used. In the RIM technology, aromatic diamine chain extenders, such as diethyltoluenediamine (DETDA), are used to produce poly(urethane ureas) (47), and replacement of the polyether polyols with amine-terminated polyols produces polyureas (48). The aromatic diamines are soluble in the polyol and provide fast reaction rates. In 1985, internal mold release agents based on zinc stearate compatibilized with primary amines were introduced to the RIM process to minimize mold preparation and scrap from parts tom at demold. Some physical properties of RIM systems are listed in Table 7. 

Polyurethane-based FTPEs are produced by reacting fluorinated polyether diols with aromatic diisocyanates. The resulting block copolymers contain fluorinated... 

Lights stability of polyurethanes depends to a large extent on their chemical structure, and both components (Le., isocyanate and polyol) have an influence. Polyurethanes based on aliphatic isocyanates and polyester diols show the best light stability if yellowing is considered, whereas polyurethanes based on aromatic isocyanates and polyether diols are worst in this respect. 

Polyurethane ether (PUR-ether) foams are thought to degrade primarily by oxidation, particularly in the presence of light, resulting in discolouration and a loss of mechanical properties. Polyurethanes synthesized from a polyether polyol and an aromatic diisocyanate such as diphenylmethane diisocyanate (MDI) are highly vulnerable to photo-oxidation, whereas polyester-based polyurethanes are more resistant to ultraviolet radiation (Kerr and Batcheller, 1993). Metal ions, particularly copper, aluminium and zinc, form chelates with some polyurethanes imparting increased sensitivity to photo-oxidation (Ranby and Rabek, 1975). 

A series of polyurethane-ureas (PUUs) has been synthesized by us, based on the aromatic diisocyanates DBDI or MDI. The materials were synthesized with two SS macrodiols, the polyether macrodiol PTMO or the polyester SS, PEA. 

---