Polyureas crystallinity

Diamine. 2,2-Dimethyl-l,3-propanediamine [7328-91-8] (5) has been prepared by amination of neopentyl glycol by treating the glycol with ammonia and hydrogen at 150—250°C at 10—31 MPa (1500—4500 psig) over a Ni catalyst. The diamine is useflil for preparation of crystalline polyureas by reaction with diisocyanates (36). 

Foams (cellular structures) made by expanding a material by growing bubbles in it [11]. A foam has at least two components. At a macroscopic scale, there are the solid and liquid phases. The solid phase can be a polymer, ceramic or metal. The fluid phase is a gas in most synthetic foams, and a liquid in most natural foams. At a microscopic scale, the solid phase may itself consist of several components. For example, the solid phase of an amorphous polystyrene foam has only one component. On the other hand, the solid phase of a polyethylene foam or a flexible polyurethane foam typically has two components. These components are the crystalline and amorphous phases in polyethylene foams, and the hard and soft phases formed by the phase separation of the hard and soft segment blocks in flexible polyurethane foams. The solid phase of a polyurethane foam may, in fact, have even more than two components, since additional reinforcing components such as styrene-acrylonitrile copolymer or polyurea particles are often incorporated [12,13]. The solid is always a continuous phase in a foam. Foams can generally be classified as follows, based on whether the fluid phase is co-continuous with the solid phase ... 

Odd-numbered nylons, the next most widely investigated semicrystalline piezoelectric polymers, have excellent piezoelectric properties at elevated temperatures but have not yet been embraced in practical application. Other semicrystalline polymers including polyureas, liquid crystalline pol5oners, biopolymers, and an array of blends have been studied for their piezoelectric potential and are summarized in the following section. The chemical repeat imit and piezoelectric constants of several semicrystalline pol3uners are listed in Table 3. 

Research in metallocene-containing polyamides, polyureas, polyuretiianes, and polyesters continued to be conducted in the 1980s, and since that time, research into these classes of materials has continued to grow7 Homoannular and heteroaimular liquid-crystalline polymetallocenes have been prepared by Zentel and coworkers through condensation reactions. Ferrocene-based liquid-crystalline polymers have also been reported by Senthil and Kannan. The synthesis of ferrocene polymers containing backbone organophosphorus moieties 32 is shown in scheme 9. 

In semicrystalline dipole electrets, polar crystallites are present in addition to the polar amorphous phase (Fig. 2b). In die technically most interesting semicrystalline dipole electrets such as polyvinyhdene fluoride (PVDF) and its copolymers with trifluoro ethylene (P(VDF-TrFE)) (Lovinger 1983) or hexafluoropropylene (P(VDF-HFP)), odd Nylons 7 and 11, polyureas, polyureflianes (PU), and some liquid crystalline polymers, the crystallites are ferroelectric (Vasudevan et al. 1979 Hattori et al. 1996). The terpolymer poly(vinyhdene-fluoride-trifluoroethylene— chlorotrifluoroethylene) (P(VDF-TrFE-CTFE)) has been shown to have relaxor ferroelectric properties as the CTFE group destabilizes die long-range order of the ferroelectric phase (Xu et al. 2001). 

---