Polypropylene methacrylate

PPMA polypropylene methacrylate psi pounds per square inch... 

Polymer Blends. The miscibility of poly(ethylene oxide) with a number of other polymers has been studied, eg, with poly (methyl methacrylate) (18—23), poly(vinyl acetate) (24—27), polyvinylpyrroHdinone (28), nylon (29), poly(vinyl alcohol) (30), phenoxy resins (31), cellulose (32), cellulose ethers (33), poly(vinyl chloride) (34), poly(lactic acid) (35), poly(hydroxybutyrate) (36), poly(acryhc acid) (37), polypropylene (38), and polyethylene (39). 

In principle, A can be any polymer normally regarded as a hard thermoplastic, eg, polystyrene, poly(methyl methacrylate), or polypropylene, and B can be any polymer normally regarded as elastomeric, eg, polyisoprene, polybutadiene, polyisobutylene, or polydimethylsiloxane (Table 2). 

Examples of thermoplastics are polyethylene, polyvinyl chloride, polystyrene, nylon, cellulose acetate, acetal, polycarbonate, polymethyl methacrylate and polypropylene. 

Poly(ethylene terephtlhalate) Phenol-formaldehyde Polyimide Polyisobutylene Poly(methyl methacrylate), acrylic Poly-4-methylpentene-1 Polyoxymethylene polyformaldehyde, acetal Polypropylene Polyphenylene ether Polyphenylene oxide Poly(phenylene sulphide) Poly(phenylene sulphone) Polystyrene Polysulfone Polytetrafluoroethylene Polyurethane Poly(vinyl acetate) Poly(vinyl alcohol) Poly(vinyl butyral) Poly(vinyl chloride) Poly(vinylidene chloride) Poly(vinylidene fluoride) Poly(vinyl formal) Polyvinylcarbazole Styrene Acrylonitrile Styrene butadiene rubber Styrene-butadiene-styrene Urea-formaldehyde Unsaturated polyester... 

Grafting reactions onto a polymer backbone with a polymeric initiator have recently been reported by Hazer [56-60]. Active polystyrene [56], active polymethyl methacrylate [57], or macroazoinitiator [58,59] was mixed with a biopolyester polyhydroxynonanaate [60] (PHN) or polybutadiene to be carried out by thermal grafting reactions. The grafting reactions of PHN with polymer radicals may proceed by H-abstraction from the tertier carbon atom in the same manner as free radical modification reactions of polypropylene or polyhy-droxybutyratevalerate [61,62]. 

Reactive compatibilization is also carried out by adding a monomer which in the presence of a catalyst can react with one or both phases providing a graft copolymer in situ that acts as a compatibilizer. Beaty and coworkers added methyl methacrylate and peroxide to waste plastics (containing polyethylene [PE], polypropylene [PP], PS, and poly(ethylene terephthalate) [PET]). The graft copolymer formed in situ homogenized the blend very effectively [19]. 

EPDM-g-glycidyl methacrylate SEBS block copolymer polypropylene... 

Polypropylene Poly(vinyl chloride) Poly(ethylene Terephthalate) Polycarbonate(bisphenol-A) Poly(methyl methacrylate)... 

Figure 6 and 7. Surface grafting of polyethylene (PE) and polypropylene (PP) films with acrylic acid (AA), methacrylic acid (MAA), crotonic acid (CA), tiglic acid (TA), 3-methylcrotonic acid (3-MCA) and a-methyl cinnamic acid (a-MCA), measured by absorption of visible light after grafting for 2 min. with vapor phase method and dipping in aqueous solution of crystal violet. 

Figure 8. Reflection infrared spectra (ATR-IR) of polypropylene film surface before (A) and after grafting with methacrylic acid (MAA) measured at the top (B) and the bottom (C) surface.

We can divide commodity plastics into two classes excellent and moderate insulators. Polymers that have negligible polar character, typically those containing only carbon-carbon and carbon-hydrogen bonds, fall into the first class. This group includes polyethylene, polypropylene, and polystyrene. Polymers made from polar monomers are typically modest insulators, due to the interaction of their dipoles with electrical fields. We can further divide moderate insulators into those that have dipoles that involve backbone atoms, such as polyvinyl chloride and polyamides, and those with polar bonds remote from the backbone, such as poly(methyl methacrylate) and poly(vinyl acetate). Dipoles involving backbone atoms are less susceptible to alignment with an electrical field than those remote from the backbone. 

Polyacetal Polyacrylamide Polyacrylonitrile Polycarbonate Polyethylene Polyethylene oxide Polyethylene terephthalate Poly isobutyl methacrylate Poly methacrylic acid Polymethyl methacrylate Polymonochlorotrifluoro ethylene Polypropylene Polystyrene... 

One such reported example is the synthesis of polypropylene-6-polymethyl-methacrylate (PP-6-PMMA) copolymers utilizing metallocene catalysis and the borane chemistry. In the initial step, PP with chain-end olefinic unsaturations was prepared using metallocene catalysts such as Et(Ind)2ZrCl2/MAO. The unsaturation sites were then hydroborated by 9-borabicyclo[3.3.1]nonane (9-BBN) to produce borane-terminated PP (43) (Fig. 30), which was selectively oxidized and interconverted to a... 

Notes Cellulose (Whatman) PTMSP, poly(trimethyl silyl propine) PS, polystyrene PP, polypropylene PE, polyethylene PA 66, polyamide 66 PA 6, polyamide 6 PVP, poly(vinyl pyrrolidone) PPO, poly(2,6-dimetyl-l,4-phenylene oxide) PMMA, poly(methyl methacrylate) PETP, polyethylene terephthalate) Irganox 1010 is a Ciba anti-oxidant. 

Figure 6 (A) Non-isothermal chemiluminescence runs for oxidation of polystyrene (PS), polyethylene terephthalate) (PETP) and polyfmethyl methacrylate) (PMMA), in oxygen, heating rate 2.5°C/min. (B) Non-isothermal chemiluminescence runs for oxidation of polypropylene (PP), polyamide 6 (PA 6), poly(vinyl pyrrolidone) (PVP), polyethylene (PE) and polyamide 66 (PA 66), in oxygen, heating rate 2.5°C/min.

The triblock terpolymer polypropylene oxide)-h-poly[2-(dimethylami-no)ethyl methacrylate]-b-poly[oligo(ethylene glycol) methacrylate], PPO-fc-PDMAEMA-fc-POEGMA, was prepared using the PPO macroinitiator followed by the addition of CuCl, HMTETA, and DMAEMA for the polymerization of the second block and finally OEGMA for the synthesis of the final product (Scheme 54) [128]. 

A third factor influencing the value of Tg is backbone symmetry, which affects the shape of the potential wells for bond rotations. This effect is illustrated by the pairs of polymers polypropylene (Tg=10 C) and polyisobutylene (Tg = -70 C), and poly(vinyi chloride) (Tg=87 C) and poly(vinylidene chloride) (Tg =- 19°C). The symmetrical polymers have lower glass transition temperatures than the unsymmetrical polymers despite the extra side group, although polystyrene (100 C) and poly(a-meth-ylstyrene) are illustrative exceptions. However, tacticity plays a very important role (54) in unsymmetrical polymers. Thus syndiotactic and isoitactic poly( methyl methacrylate) have Tg values of 115 and 45 C respectively. 

---