Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Polyol pigments dispersed

Tegocolor . [Goldschmidt] Pigment dispersions in a polyether polyol fix coloring polyethn polyurethane foam. [Pg.368]

Products Pigments/dispersions, photoinitiators/sensitizers, acrylate monomers, vinyl ethers, polyols/glycols, epoxy acrylates, polyester acrylates, unsaturated polyesters, urethane acrylates... [Pg.341]

GP-209 Slicone Polyol Copolymer GP-215 Slicone Polyol Copolymer dispersant, pigments HOPE Maxomer LUBE E2SA dispersant, pigments high-gioss emuision paints Nuosperse FX 508 dispersant, pigments high-pH appiics. [Pg.2630]

Titanium dioxide pigment coated with pentaerythritol, trimethylolpropane, or trim ethyl ol eth an e exhibits improved dispersion characteristics when used in paint or plastics formulations. The polyol is generally added at levels of 0.1—0.5% (96). [Pg.466]

If required, pigment and any other additive may be added and predispersed. The pigments used must be in a dry, nonreactive medium. If the pigments are dispersed in a polyol, the paste may absorb moisture and will react with some of the isocyanate groups. Some yellow pigments need to be added to the prepolymer prior to its final heating, as they disperse poorly. [Pg.72]

MeadWestvaco USA Non-sulfonated kraft lignin, lignosulfonates Lignin products hydroxymethylated lignin, propoxylated lignin polyols additives for cements and animal feeds Adhesives for particle boards Wax emulsifier Dispersants for dyes and pigments, ceramics, refractories and concrete... [Pg.299]

DeMULS SMS GP-219 Silicone Polyol Copolymer Histar BS dispersant, pigment thermoset powder coatings... [Pg.1507]

Component 6 all dry pigments must be used in the form of carefully ground, ball milled or its equivalent, dispersions. Usually some of the polyol is used as a reactive carrier for the solid pigment. [Pg.180]

Aqueous two-component polyurethane systems for automotive topcoats are under development. Currently the automotive topcoats are made from solvent-based two-component or blocked one-component systems based on HDI trimer (Desmodur N) or IPDI trimer (Desmodur Z) or both in conjunction with an acrylic polyol. The polyurethane topcoats provide the vehicles with a tough and durable finish with excellent long-lasting glossy appearance ( wet look ) One-component aqueous dispersions are already used in electrodeposition primers and pigmented base coats. Soft-feel polyurethane coatings are increasingly used for instrument panels and seat covers. [Pg.6694]

As an alternative to pressed powders, liquid foundations have attracted special attention in recent years. Most foundation make-ups are made of O/W or W/0 emulsions in which the pigments are dispersed either in the aqueous or the oil phase. These are complex systems consisting of a suspension/emulsion (suspoe-mulsion) formulation. Special attention should be paid to the stability of the emulsion (absence of flocculation or coalescence) and suspension (absence of flocculation). This is achieved by using specialised surfactant systems such silicone polyols or block copolymers of poly(ethylene oxide) and poly(propylene oxide). Some thickeners may be also added to control the consistency (rheology) of the formulation. [Pg.431]

Chem. Descrip. Dist. polyol-based ester derived from veg. oils Uses Vehicle, dispersant, wetting agent, binder, process aid for pigments and colorant systems antistat, antifog, melt flow enhancer, filler for polymers Regulatory FDA compliance GRAS Properties Ivory wh. liq. above 40 C, soft paste at ambient temps. [Pg.1732]

Aerosol OT-B Batiace B-30 Bari-ace B-34 Baiiline BF-1 Barifine BF-20 Barifine BF-20F Barifine BF-20P Barifine BF-21 Barifine BF-21P Barifine BF-40 Drakeol 7 Drakeol 9 Geropon SDS GP-214 Siicone Polyol Copolymer Maxsperse W-85 Nuosperse FX 600 Oleyl alcohol PPG-40 diethylmonitm chloride Silicone glycol copolymer SMA 1000 F SMA 2000 SMA 3000 Sodium diisooctyl sulfosuccinate Variquat CC-42 dispersant, pigments plastics/oig. niedia... [Pg.2632]

Geropon BIS SODICO 2 dispersant, pigments polishes GP-209 Silicone Polyol Copolymer GP-215 Siicone Polyol Copolymer Span 83 Zonyl FSN-100 Zonyl FSO-100 dispersant, pigments pollution control... [Pg.2632]

GP-219 Silicone Polyol Copolymer Hislar BS Tegomet DA-100 N dispersant, pigments thermoset powder coatings Modallow Powder 2000 dispersant, pigments thermosets BYK -W975... [Pg.2633]


See other pages where Polyol pigments dispersed is mentioned: [Pg.156]    [Pg.240]    [Pg.3272]    [Pg.46]    [Pg.389]    [Pg.488]    [Pg.1502]    [Pg.8694]    [Pg.283]    [Pg.982]    [Pg.2084]    [Pg.172]    [Pg.1006]    [Pg.582]    [Pg.200]    [Pg.344]    [Pg.75]    [Pg.90]    [Pg.21]    [Pg.829]    [Pg.2630]    [Pg.2632]   
See also in sourсe #XX -- [ Pg.72 , Pg.203 ]




SEARCH



Pigment dispersibility

Pigments dispersion

© 2024 chempedia.info