Polyethylene glycol nonyl phenol

Polycyclocondensation, high-temperature catalytic 142, 146, 148-162 Polydimethylacrylamide 19 Polyelectrolytes, water-soluble 49 Polyethylene glycol nonyl phenol 58 Polyheteroarylenes 158, 162, 167 Polynaphthoylenebenzimidazoles 118,146-165... 

CAS 9016-45-9 (generic) 37205-87-1 (generic) 68412-54-4 (generic) Synonyms Glycols, polyethylene, mono (nonylphenyl) ether Nonylphenol ethoxylates Nonylphenol, polyoxyethylene ether Nonyl phenyl polyethylene glycol Nonyl phenyl polyethylene glycol ether Polyethylene glycol nonyl phenyl ether Polyoxyethylene nonylphenol Classificatbn Ethoxylated alkyl phenol Formula (CjH O), CisHj O... 

A recent study on electrokinetic removal of ethyl benzene from contaminated clay showed a promising use of anionic-nonionic mixed surfactants. Surfactant addition resulted in 1.6-2.4-fold more removal than afforded by EK alone, and a mixed surfactant system, including 0.5% SDS and 2.0% PANNOX 110 (nonyl phenol polyethylene glycol ether) permitted optimal ethyl benzene removal (98%). This indicated that, in the presence of mixed surfactant micelles, the zeta potential of the soil particles significantly increased compared with that seen when anionic surfactant micelles were formed, and electrolytic mobility was thus enhanced (Yuan and Weng, 2004). The use of anionic-nonionic mixed surfactants in EK will also improve the desorption and migration of PAHs. 

Calcium dodecylbenzene sulfonate Glycidol PEG/PPG-17/6 copolymer PEG/PPG-35/9 copolymer PEG/PPG-125/30 copolymer Poloxamer 101 Poloxamer 105 Poloxamer 108 Poloxamer 122 Poloxamer 123 Poloxamer 124 Poloxamer 181 Poloxamer 182 Poloxamer 183 Poloxamer 184 Poloxamer 185 Poloxamer 188 Poloxamer 212 Poloxamer 215 Poloxamer 231 Poloxamer 234 Poloxamer 235 Poloxamer 237 Poloxamer 238 Poloxamer 282 Poloxamer 284 Poloxamer 288 Poloxamer 331 Poloxamer 333 Poloxamer 334 Poloxamer 335 Poloxamer 338 Poloxamer 401 Poloxamer 402 Poloxamer 403 Poloxamer 407 Stearyl hydroxyethyl imidazoline Tall oil hydroxyethyl imidazoline Tetrasodium dicarboxyethyl stearyl sulfosuccinamate demulsifier component, crude oil Nonoxynol Nonyl nonoxynol Phenol-formaldehyde sulfonate Polyethylene glycol demulsifier component, lubricant Nonyl nonoxynol Phenol-formaldehyde sulfonate... 

Uses Surfactant degreasers, compounds for dry-cleaning, liq. water-based waxes for ceramic floors and floor covering Trade Names Ultranex NP 40 Nonylphenol ethoxylates. See Nonoxynol Nonyl phenol ethoxy (4) sulfate. See Nonoxynol-4 sulfate Nonyl phenol ethoxy (10) sulfate. See Nonoxynol-10 sulfate Nonyl phenol (mixed isomers). See Nonylphenol Nonylphenol polyethylene glycol ether, 10 EO. See Nonoxynol-10 Nonylphenol polyethylene glycol ether, 15 EO. See Nonoxynol-15 Nonylphenol polyethylene glycol ether, 20 EO. See Nonoxynol-20 Nonylphenol, polyoxyethylene ether. See Nonoxynol 2-(Nonylphenoxy) ethanol. See Nonoxynol-1 2-[2-[2-(Nonylphenoxy)ethoxy]ethoxy]ethanol. See Nonoxynol-3 23-(Nonylphenoxy)-3,6,9,12,15,18,21-heptaoxatricosan-1-ol. See Nonoxynol-8... 

The base polymer for this t5q>e of sealant exists in the form of an emulsion of micron- and submicron-sized partides of the polymer suspended in water. The base polymer formed by free radical polymerization may be a homopolymer of an acrylic monomer but is more likely to be a copolymer of a number of different monomers chosen to provide the correct balance of properties. The polymer latex has to be made more permanent and therefore a nonionic surfactant such as a nonyl phenol/ polyethylene oxide is added to help stabilize the emulsion. Other additives to the sealant formulation include plastid-zers, fillers, solvents, and silanes. A plasticizer is added to the formulation in order to improve upon or maintain the flexibility of the sealant. Solvents (usually a small amount) are added to improve the tooling of the sealant after it is applied. In addition, a solvent could be a material such as ethylene or propylene glycol which can improve the resistance of the packaged sealant to temperatures below freezing. The most widely used filler for this type of sealant is calcium carbonate. Silanes are often added to acrylics to improve the wet adhesion of the sealant to glass. Other additives include antimildew agents (for tub and tile applications) and clay for rheological control. 

---