Polyester polymer concrete properties

FIGURE 1.3 Most common aggregate systems used in PC. (From V. Y. Garas and C. Vipulanandan, Review of Polyester Polymer Concrete Properties, http //www2.egr. uh.edu/ civebl/CIGMAT/03 poster/ll.pdf.)... 

R. Griffiths and A. Ball An Assessment of the Properties and Degradation Behaviour of Glass-Fiber-Reinforced Polyester Polymer Concrete, Composites Science and Technology Vol. 

Finally some important properties of cement concrete, polymer concrete, and sulfur concrete are compared with each other. For the polymer concrete the data of a commercial polyester concrete were used. 

Polymer concretes show excellent mechanical properties and chemical resistance compared with conventional cement concretes. Polymer concretes can be cured quickly by the use of curing agents. Thus, the applications of polymer concretes are being increased. One of the popular polymers for polymer concretes is unsaturated polyester (UPE) resin. The properties of UPE resin can be modified by changing its molecular features. For the synthesis of the resin, phthalic anhydride or isophthalic acid as well as maleic anhydride can be employed to modify the mechanical properties or hydrothermal resistance. Terephthalic acid which is also used for the synthesis of poly ethylene terephthalate (PET) enhances the thermal resistance of the cured UPE resin. However, the synthesis of unsaturated polyester resin from terephthalic acid is difficult. One method to synthesize unsaturated polyester from terephthalic acid is the use of recycled PET. 

Polymer concretes based on phenol-formaldehyde, acetone-formaldehyde resins and monomers, and methyl methacrylate are much less common. Phenolic resins are similar to furan in many physical and mechanical properties. However, they are unstable in alkalis like polyester resins [7],... 

Other tertiary recycling processes that have been developed include a Freeman Chemical Corp. process to convert PET bottles and film to aromatic polyols used for manufacture of urethane and isocyanurates. Glycolized PET, preferably from film, since it is often lower in cost than bottles, can be reacted with unsaturated dibasic acids or anhydrides to form unsaturated polyesters. These can then be used in applications such as glass-fiber-reinforced bath tubs, shower stalls, and boat huUs. United States companies that have been involved include Ashland Chemical, Alpha Corp., Ruco Polymer Corp., and Plexmar. Unsaturated polyesters have also been used in polymer concrete, where the very fast cure times facilitate repair of concrete structures. Basing polymer concrete materials, for repair or precast applications, on recycled PET reportedly leads to 5 to 10 percent cost savings and comparable properties to polymer concrete based on virgin materials. However, they are still approximately 10 times the cost of portland cement concrete. There appears to be little commercial application of these processes at present. 

UP Unsaturated polyester Reproduced with permission from M.S. Helal in Experimental Study of Mechanical Properties and Structural Applications of Polymer Concrete, University of Texas, Austin, TX, USA, 1990 [PhD Thesis], 1990, University of Texas [17] ... 

PET is useful polymer used for fiber, film, and plastic containers such as carbonated beverage bottles. Recently, the recycling of polymers such as PET after use is attracting the attention of many researchers aware of environmental problems and wishing to find ways to save earth resources. Previous studies showed that unsaturated polyester resins can be economically prepared from recycled PET and the resins may be useful for resin concretes (1 4). However, there is little information on the molecular features of the UPE resins. Thus, we synthesized various UPE resins from PET. Especially, the PET content, chain flexibility and degree of unsaturation of the resins were systematically varied and the effects of those variables on the mechanical properties of the cured resins and polymer mortars made therefrom were studied. 

---