Polyacrylonitrile decomposition

Polyacrylonitrile decomposition begins at 260 °C and passes through a maximum 297 °C. From the DSC curve, the kinetic parameters are calculated to be reaction order = 0.9 and E, = 410 kj mol. ... 

Combination techniques such as microscopy—ftir and pyrolysis—ir have helped solve some particularly difficult separations and complex identifications. Microscopy—ftir has been used to determine the composition of copolymer fibers (22) polyacrylonitrile, methyl acrylate, and a dye-receptive organic sulfonate trimer have been identified in acryHc fiber. Both normal and grazing angle modes can be used to identify components (23). Pyrolysis—ir has been used to study polymer decomposition (24) and to determine the degree of cross-linking of sulfonated divinylbenzene—styrene copolymer (25) and ethylene or propylene levels and ratios in ethylene—propylene copolymers (26). 

The high purity carbon nanotubes (CNTs) used in this study were obtained by decomposition of acetylene over a powdered CoxMgi xO solid solution catalyst [19]. Different proportions of CNTs from 15 to 70% and polyacrylonitrile (PAN, Aldrich) have been mixed in an excess of acetone to obtain a slurry. After evaporation of acetone, precursor electrodes were formed by pressing the CNTs/PAN mixture at 1-2 tons/cm2. The C/C composites were formed by carbonisation of the pellets at 700-900°C for 30-420 min under nitrogen flow [20], The optimal capacitance properties of the composite were obtained for a mixture CNTs/PAN (30/70 wt%) treated at 700°C. Such C/C composite remains still quite rich in nitrogen (9 at% of N) demonstrating that PAN is an efficient nitrogen carrier. On the other hand,... 

CNF is an industrially produced derivative of carbon formed by the decomposition and graphitization of rich organic carbon polymers (Fig. 14.3). The most common precursor is polyacrylonitrile (PAN), as it yields high tensile and compressive strength fibers that have high resistance to corrosion, creep and fatigue. For these reasons, the fibers are widely used in the automotive and aerospace industries [1], Carbon fiber is an important ingredient of carbon composite materials, which are used in fuel cell construction, particularly in gas-diffusion layers where the fibers are woven to form a type of carbon cloth. 

Ceramic fibers used in composites are usually made by high-temperature methods. Carbon (graphite) fiber, for example, can be made by the thermal decomposition of fibers of polyacrylonitrile, a long-chain organic molecule also used to make the textile Orion ... 

Carbon fibers are the most rigid and strongest of commonly used reinforcements. They are produced by the pyrolysis (high-temperature decomposition) of natural and synthetic materials, such as rayon, polyacrylonitrile (PAN), and pitch (the tacky residue left from the distillation of petroleum or coal tar). Carbon fibers are commercially available in a variety of formats, including single strands and bundles (known as tows). They are midway in density between glass and polymer fibers and are the most expensive of commonly used reinforcements. 

Several purely organic polymers like pyrolized polyacrylonitrile Sl polyamino-quinones 52>, vulcanized aniline black or ordinary aniline black 53>S4) and pyrolized chlorinated polyvinylchloride ss> were shown to be active for H2Oa decomposition. pH dependence was found in some cases, but mostly no correaltions were found with paramagnetism or semiconductivity. It has been shown S6> for the case of pyrolized polyacrylonitrile, that this polymer actually behaves as a polyquinone, capable of reversible electron transfer ... 

Tsuchiya, Y., Sumi, K. (1977). Thermal decomposition products of polyacrylonitrile. J. Appl. Polym. Sci. 21 975-80. 

Recently the pyrolysis of polymer mixtures has become a focus of interest due to the increasing role of plastics recycling. Many researchers have investigated the thermal decomposition of various polymers in the presence of PVC. Kniimann and Bockhom [25] have studied the decomposition of common polymers and concluded that a separation of plastic mixtures by temperature-controlled pyrolysis in recycling processes is possible. Czegfny et al. [31] observed that the dehydrochlorination of PVC is promoted by the presence of polyamides and polyacrylonitrile however, other vinyl polymers or polyolefins have no effect on the dehydrochlorination. PVC generally affects the decomposition of other polymers due to the catalytic effect of HCI released. Even a few per cent PVC has an effect on the decomposition of polyethylene (PE) [32], HCI appears to promote the initial chain scission of PE. Day et al. [33] reported that PVC can influence the extent of degradation and the pyrolysis product distribution of plastics used in the... 

Carbonaceous materials (CMs) are sometimes also named polymeric carbons. They are mostly prepared by thermal decomposition of organic precursors. One strategy is pyrolysis of gaseous or vaporized hydrocarbons at the surface of heated substrates, a second is heating (pyrolysis) of natural or synthetic polymers, both in an inert atmosphere. The latter is of special interest, and according to Miyabayashi et al. [374], precursors such as condensed polycyclic hydrocarbons, polymeric heterocyclic compounds, phenol-formaldehyde resins, polyacrylonitrile or polyphenylene are heated to 300-3000 °C for 0.15-20 h. Sometimes, a temperature/time profile is run. The temperature range must be divided into two domains, namely... 

---