Poly phenylene ether

Major polymer applications electronics (computer and television housings, keyboard frames, interface boxes), automotive (instrument panels, interior and exterior trim, glove compartments, wheel covers, electric connectors, ftise boxes), air conditioner housings, hospital and office fiimiture, production of blends 

Important processing methods injection molding, blow molding, extrusion, thermoforming 

Typical fillers calcium carbonate, glass fiber, carbon fiber, zinc borate, PTFE, aluminum flake, graphite fiber, nickel coated graphite fiber 

Typical concentration range glass fiber - 10-40 wt%, carbon fiber - 10-20 wt%, also filled with a combination of mineral filler and glass fiber - 40 wt%, PTFE - 2-3 wt% 

Special methods of incorporation PPO is processed with PS which acts as plasticizer 

---

AppHcation of an adhesion-promoting paint before metal spraying improves the coating. Color-coded paints, which indicate compatibiHty with specific plastics, can be appHed at 20 times the rate of grit blasting, typically at 0.025-mm dry film thickness. The main test and control method is cross-hatch adhesion. Among the most common plastics coated with such paints are polycarbonate, poly(phenylene ether), polystyrene, ABS, poly(vinyl chloride), polyethylene, polyester, and polyetherimide. 

Alkylated phenol derivatives are used as raw materials for the production of resins, novolaks (alcohol-soluble resins of the phenol—formaldehyde type), herbicides, insecticides, antioxidants, and other chemicals. The synthesis of 2,6-xylenol [576-26-1] h.a.s become commercially important since PPO resin, poly(2,6-dimethyl phenylene oxide), an engineering thermoplastic, was developed (114,115). The demand for (9-cresol and 2,6-xylenol (2,6-dimethylphenol) increased further in the 1980s along with the growing use of epoxy cresol novolak (ECN) in the electronics industries and poly(phenylene ether) resin in the automobile industries. The ECN is derived from o-cresol, and poly(phenylene ether) resin is derived from 2,6-xylenol. 

Poly(phenylene ether). The only commercially available thermoplastic poly(phenylene oxide) PPO is the polyether poly(2,6-dimethylphenol-l,4-phenylene ether) [24938-67-8]. PPO is prepared by the oxidative coupling of 2,6-dimethylphenol with a copper amine catalyst (25). Usually PPO is blended with other polymers such as polystyrene (see PoLYETPiERS, Aromatic). However, thermoplastic composites containing randomly oriented glass fibers are available. 

Poly(phenylene ether) Alloys. Poly(phenylene ether) resins (91), composed of phenoHc monomers, have a very high T. The commercial resins are based on 2,6-dimethylphenol. The resin is produced by oxidative polymerization in toluene solution over an amine catalyst (see also PoLYETPiERS, aromatic). 

Table 10. Properties of Poly(phenylene ether)-based Resins ...

Worldwide sales of poly(phenylene ether)—styrene resin alloys are 100,000—160,000 t/yr (47,96) aimual growth rates are ca 9%. Other resin, particularly acrylonitrile—butadiene—styrene (ABS) polymers and blends of these resins with PC resins, compete for similar appHcations. 

Polyether-PA segmented copolymers, synthesizing, 191-192 Polyether polyols, 200, 205, 211-212 synthesis of, 223, 224 Poly(ether sulfone) (PES), 327. See also Poly(arylene ether sulfone)s Poly(phenylene ether sulfone) chains Sulfonated poly (ary lene ether sulfone)... 

Poly f p-oxybenzoyl-co-p-phenylene isophthalate]), 113-114 Poly(2,2 -oxydiethylene adipate), 29 Polyoxymethylene glycol, aqueous, 377 Poly(oxytetramethylene) (PTMO), 53 Poly (p-pheny lene). See also Poly(para-phenylene)s dendronized, 520-521 synthesis of, 491-494 synthesis of water-soluble, 493 Poly(phenylene ether sulfone) chains,... 

Poly(phenylene oxide) PPO, or poly(phenylene ether) PPE, is an engineering polymer developed by General Electric. It concerns the oxidative coupling of phenols discovered in 1956 by Allan S. Hay [21], Oxidative coupling leads to the formation of carbon-oxygen bonds between carbon atoms 2,4, and 6 and the phenolic oxygen atom. To avoid coupling with carbon atoms 2 and 6, alkyl substituents at these two positions were introduced. In addition to the polymer a 4,4 dimer is formed, named diphenoquinone (DPQ). The... 

ISO 15103-1 2000 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials -Part 1 Designation system and basis for specifications ISO 15103-2 2000 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials -Part 2 Preparation of test specimens and determination of properties... 

Poly(phenylene ether) 170 Often alloyed with polystyrene... 

Poly(phenylene ether) poly(phenylene oxide) (PPO) (General Electric)... 

MPPE poly(phenylene ether) polystyrene blend... 

To this type of reaction belongs the synthesis of poly(phenylene ether)s from substituted phenols, for example, poly(2,6-dimethylphenylene ether), PPE, from 2,6-dimethylphenol in the presence of pyridine and copper(I) chloride ... 

The incorporation of SO2 groups into the main chain of poly(phenylene ether)s leads to poly(phenylene ether sulfone)s. The preferential synthetic routes are ... 

The anisotropy of polarizability can be positive (eg, polycarbonate) as well as negative (eg, polystyrene). This offers the possibility of minimizing birefringence by copolymerization or blending of suitable polymers with the right mixture ratio, eg, blends of poly(phenylene ether) (PPE) and polystyrene (PS). The magnitude of birefringence of axial-symmetrically oriented polymers vs their molecule orientation has been described (182). 

As of 1992, the first specialty platable plastic, acrylonitrile—butadiene—styrene (ABS) terpolymer (see Acrylonitrile polymers, abs resins), is used in over 90% of POP applications. Other platable plastics include poly(phenylene ether) (see Polyethers), nylon (see Polyamides), polysulfone (see Polymers containing sulfur), polypropylene, polycarbonate, phenolics (see Pphenolic resins), polycarbonate—ABS alloys, polyesters (qv), foamed polystyrene (see Styrene plastics), and other foamed plastics (qv). 

---