Poly ferroelectricity

Polymer Ferroelectrics. In 1969, it was found that strong piezoelectric effects could be induced in the polymer poly(vinyhdene fluoride) (known as PVD2 or PVDF) by apphcation of an electric field (103). Pyroelectricity, with pyroelectric figures of merit comparable to crystalline pyroelectric detectors (104,105) of PVF2 films polarized this way, was discovered two year later (106.)... 

Materials. For holographic information storage, materials are required which alter their index of refraction locally by spotwise illumination with light. Suitable are photorefractive inorganic crystals, eg, LiNbO, BaTiO, LiTaO, and Bq2 i02Q. Also suitable are photorefractive ferroelectric polymers like poly(vinyhdene fluoride-i o-trifluorethylene) (PVDF/TFE). Preferably transparent polymers are used which contain approximately 10% of monomeric material (so-called photopolymers, photothermoplasts). These polymers additionally contain different initiators, photoinitiators, and photosensitizers. 

Licjuid Crystals. Ferroelectric Hquid crystals have been appHed to LCD (Uquid crystal display) because of their quick response (239). Ferroelectric Hquid crystals have chiral components in their molecules, some of which are derived from amino acids (240). Concentrated solutions (10—30%) of a-helix poly(amino acid)s show a lyotropic cholesteric Hquid crystalline phase, and poly(glutamic acid ester) films display a thermotropic phase (241). Their practical appHcations have not been deterrnined. 

Ferroelectrics Poly(vynidilene fluoride) undergoes electrostriction when subjected to high ac fields, thus can be made into actuators applied pressure produces a piezoelectric response useful in sensors. 

Baltd-Calleja, F. J., Gonzalez Arche, A., Ezquerra, T. A., Santa Cruz, C., Batallon, F., Frick, B. and Lopez Cabarcos, E. Structure and Properties of Ferroelectric Copolymers of Poly(vinylidene) Fluoride. Vol. 108, pp. 1-48. 

Note 2 Poly(vinylidene fluoride) after being subjected to a corona discharge is an example of a ferroelectric polymer. 

Barium titanate is one example of a ferroelectric material. Other oxides with the perovskite structure are also ferroelectric (e.g., lead titanate and lithium niobate). One important set of such compounds, used in many transducer applications, is the mixed oxides PZT (PbZri-Ji/Ds). These, like barium titanate, have small ions in Oe cages which are easily displaced. Other ferroelectric solids include hydrogen-bonded solids, such as KH2PO4 and Rochelle salt (NaKC4H406.4H20), salts with anions which possess dipole moments, such as NaNOz, and copolymers of poly vinylidene fluoride. It has even been proposed that ferroelectric mechanisms are involved in some biological processes such as brain memory and voltagedependent ion channels concerned with impulse conduction in nerve and muscle cells. 

Photovoltaic volume effects have been investigated for the ferroelectric polymer-poly vinylidene fluoride [84,85]. The photovoltage was of the order 4 x 104 V for open circuit. The addition of dyes shifts the photosensitivity to the longer wavelength. 

Structure and Properties of Ferroelectric Copolymers of Poly(Vinylidene Fluoride)... 

In the article by Balta Calleja et al., the latest results of investigations into the structure of poly(vinylidenefluoride)and its copolymers withpoly(trifluoroethylene) are summarized and extensively dicussed. These polymers are the most important ferroelectric materials. Special emphasis is placed on the relation between the change of structure and the transition from the ferroelectric into the paraelectric phase. 

Poly(vinylidene fluoride) with the sequence (CF2-CH2)n is a well known ferroelectric polymer in the crystalline state where the chains adopt an all-trans conformation [424]. This structure could provide interesting properties if used as building block of LC. 

The supramolecular structure of block co-polymers allows the design of useful materials properties such as polarity leading to potential applications as second-order nonlinear optical materials, as well as piezo-, pyro-, and ferroelectricity. It is possible to prepare polar superlattices by mixing (blending) a 1 1 ratio of a polystyrene)-6-poly(butadiene)-6-poly-(tert-butyl methacrylate) triblock copolymer (SBT) and a poly (styrene)-Apoly (tert-butyl methacrylate) diblock copolymer (st). The result is a polar, lamellar material with a domain spacing of about 60 nm, Figure 14.10. 

---