Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Poly diglycidyl ether of bisphenol

Poly(diglycidyl ether of Bisphenol A) epoxy resin... [Pg.841]

Polymer (B) poly(diglycidyl ether of bisphenol A) 2007DL2... [Pg.472]

The preferred polyol is a polyether triol (MW of 4700-5000 daltons), with a terminal poly[EO] block (13-15% EO). The preferred epoxy resin is a liquid one, the diglycidyl ether of bisphenol A (DGBA), and the hardener is ethylenediamine (EDA). The molar ratio of epoxy resin EDA is around 0.8-1 1. [Pg.224]

Structural epoxy adhesives based on DGEBA (diglycidyl ether of bisphenol A) were cured with poly(amido-amine) and HB products at room temperature for seven days. [Pg.219]

Poly(DL-lactide-co-glycolide) Poly(L-lactide-co-diglycidyl ether of bisphenol A-co- 303-306... [Pg.481]

Fra Francis, B., Thomas, S., Sadhana, R., Thuaud, N., Ramaswamy, R., Jose, S., Rao, V. L. Diglycidyl ether of bisphenol-A epoxy resin modified using poly (ether ether ketone) with pendent tert-butyl groups. J. Polym. Sci. B Polym. Phys. 45 (2007) 2481-2496. [Pg.550]

Unsaturated poly(ester amide) resins were also prepared by reaction between diglycidyl ether of bisphenol-A-based epoxy and unsaturated aliphatic bisamic acids, using a base catalyst (Fig. 5.4). These resins were then blended with styrene to produce homogeneous resin syrups which were cured by using BPO as the free radical initiator. [Pg.132]

The additive reaction of oxiranes was also utilized for the preparation of SMP networks with covalent crosslinks. The crosslinking of 3-amino-1,2,4-triazole with epoxidized natural rubber catalyzed by bisphenol-A resulted in polymer networks having shape-memory capability with Ti ms = Tg [82]. The Tg could be controlled by the 3-amino-1,2,4-triazole content in the range between 29 and 64 °C. Recently, the crosslinking reaction of oxiranes and amines was systematically investigated in two polymer systems based on the reaction of the diglycidyl ether of bisphenol A epoxy monomer cured with the bifunctional poly(propylene glycol)bis(2-aminopropyl)... [Pg.15]

In our previous works (7-9) siloxane-silica clusters formed by the sol-gel process from tetraethoxysilane (TEOS) were used to reinforce the rubbery epoxide network based on diglycidyl ether of Bisphenol A (DGEBA) and poly(oxypropylene)diamine (Jeffamine D2000). [Pg.486]

The aliphatic polyamines most commonly used to cure epoxides are diethyleunine triamine (DETA) and triethylene tetramine (TETA). These are both pungent, low viscosity hquids and they are commonly used with the diglycidyl ether of bisphenol A type resins, where rapid low temperature cures are required. Three other commonly used poly amines are ethylene diamine (EDA), tetramethylene pentamine (TEPA) and diethylaminopropylamine (DEAPA)... [Pg.109]

See other pages where Poly diglycidyl ether of bisphenol is mentioned: [Pg.538]    [Pg.549]    [Pg.538]    [Pg.549]    [Pg.154]    [Pg.25]    [Pg.238]    [Pg.7]    [Pg.69]    [Pg.306]    [Pg.306]    [Pg.539]    [Pg.180]    [Pg.434]    [Pg.715]    [Pg.106]    [Pg.65]    [Pg.67]    [Pg.115]    [Pg.475]    [Pg.435]    [Pg.38]    [Pg.429]    [Pg.260]    [Pg.227]    [Pg.559]    [Pg.273]    [Pg.870]    [Pg.272]    [Pg.272]    [Pg.541]   


SEARCH



BISPHENOL DIGLYCIDYL

Bisphenol

Bisphenols

DIGLYCIDYL ETHER BISPHENOL

Diglycidyl ether

Ether of bisphenol

Poly ethers

© 2024 chempedia.info