Polarization modulated Fourier transform infrared reflection absorption

X. Bin, Electrochemical and polarization modulation Fourier transform infrared reflection absorption spectroscopic studies of phospholipids bilayers on a Au(lll) electrode surface . PhD thesis, University of Guelph, 2005. [Pg.376]

Recent work in our laboratory has shown that Fourier Transform Infrared Reflection Absorption Spectroscopy (FT-IRRAS) can be used routinely to measure vibrational spectra of a monolayer on a low area metal surface. To achieve sensitivity and resolution, a pseudo-double beam, polarization modulation technique was integrated into the FT-IR experiment. We have shown applicability of FT-IRRAS to spectral measurements of surface adsorbates in the presence of a surrounding infrared absorbing gas or liquid as well as measurements in the UHV. We now show progress toward situ measurement of thermal and hydration induced conformational changes of adsorbate structure. The design of the cell and some preliminary measurements will be discussed. [Pg.435]

The technique using p-s modulation has received different names depending on the kind of IR instrument used. Thus for grating instruments it was called PMIRRAS (polarization modulation infrared reflection-absorption spectroscopy) [6]. For FT spectrometers the name FTIRRAS [8] was suggested. However this name was later used also in connection with Fourier transform spectra applying the potential difference approach. [Pg.137]

Polarization-modulation infrared reflection-absorption spectroscopy (PM-IR-RAS) spectra were recorded with a Bruker ITS 66/S Fourier transform infrared spectrometer equipped with a PMA 37 polarization modulation module and a ititrogen-cooled MCT detector. The infrared beam was first p-polarized with a ZnSe wire grid polarizer (Specac) before passing through a photoelastic modulator (Hinds Instruments, PEM-90), which modulated at a frequency of 74 kHz. A lock-in ampHfier (Stanford model SR-830) was used to obtain the PM-IRRAS spectra. The half-wave retardation frequency was set at 4000 cm . The PM-IR-RAS spectra were recorded as S= R -Rs)/(R +Rg). A total of 250 scans at a resolution of 4 cm were collected for each measurement at an angle of incidence of 82.5° with respect to the normal to the sample surface. [Pg.291]

Infrared Spectroscopy. Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) data were collected using a Nicolet MAGNA-IR 860 Fourier transform spectrometer equipped with a liquid nitrogen-cooled mercury-cadmium-telluride (MCT) detector and a Hinds Instruments PEM-90 photoelastic modulator. The p-polarized light was incident at 80° from the surface normal. The spectra were collected for 1000 scans at a spectral resolution of 4 cm . ... [Pg.277]

In this chapter, a sensitive method for measurement by continuous-scan Fourier-transform infrared (FT-IR) spectrometry called polarization-modulation spectrometry is introduced this is a useful method for measuring, with high signal-to-noise ratio, not only the reflection-absorption spectra of thin films adsorbed onto metal substrates but also other spectra such as vibrational circular dichroism (VCD) spectra. Polarization-modulation spectrometry is a type of double-modulation FT-IR spectrometry [1], In this chapter, descriptions of double-modulation spectrometry are given first, then polarization-modulation spectrometry is discussed, and then its application to the measurement of reflection-absorption spectra of thin films on metal substrates is discussed. [Pg.153]

Boujday S, Methivier C, Beccard B, Pradier C-M (2009) Innovative surface characterization techniques applied to immunosensor elaboration and test comparing the efficiency of Fourier transform-surface plasmon resonance, quartz crystal microbalance with dissipation measurements, and polarization modulation-reflection absorption infrared spectroscopy. Anal Biochem 387 194-201... [Pg.158]