PMMA/CNTs nanocomposites processing

Du, Fischer, and Winey (2003) and Zeng et al. (2010) used both methods in attempts to produce the PMMA/carbon nanotube (CNT) nanocomposites. They found ASP resulted in better CNTs dispersion. Unlike the solvent casting process where nanoparticles may agglomerate during solvent evaporation, in ASP, the rapid precipitation of PMMA-CNTs very effectively lock down the well-dispersed structure. 

Chen et al. (67) reported the use of trifluoroacetic acid (TFA) as a cosolvent with tetrahydrofuran (THF) to improve dispersion and processability of the nanocomposites. They prepared MWCNT-PMMA composite films with varying CNT content by solvent casting method using 10 vol % TFA as a co-solvent with tetrahydrofuran (THF). SEM and optical microscopy revealed a good dispersion of nanotubes in solvent and PMMA. The composites showed low percolation... 

Many studies have used these methods for processing of both thermosetting and thermoplastic polymers. Y. Liao (53) dissolved epoxy in a well-dispersed, ultra-sonicated CNT suspension. The solvent was evaporated, and the epoxy was subsequently cured to form a nanocomposite in which the good CNT dispersion was achieved. Jin et al. (54) produced various types of polymer-coated and polymer-grafted MWNT solutions, in some cases evaporating the solvent and subsequently melt-mixing with another polymer. Yudasaka et al. (55) used a mixture of SWNTs and PMMA in monochlorobenzene (MCB) for dispersion, purification and subsequent spin-casting of the material. 

---