Phosphines aldehydes

The most unusual substrate in this study was the phosphine aldehyde, PCHO. This substrate adds extremely effectively to 1, yielding an RpcHO of 1 x 102. The significance of this result lies in the recognition that its enhancement factor, i.e., PCHO PhCHO s lO6 while similar enhancement factors for the... 

A wide range of ruthenium DH ketone catalysts have been made with phosphorus and nitrogen ligands. The Schiff base condensation of phosphine aldehydes and amines to generate iminophosphines is an important reaction for providing a range of... 

Synthesis of phosphonium dimers protected phosphine aldehydes... 

Another very important reaction initially involving nucleophilic attack on an aldehyde carbonyl is the Wittig reaction. An yUd adds to the carbonyl forming a betaine intermediate which then decomposes to produce an olefin and a tertiary phosphine oxide. 

The search for catalyst systems which could effect the 0x0 reaction under milder conditions and produce higher yields of the desired aldehyde resulted in processes utilizing rhodium. Oxo capacity built since the mid-1970s, both in the United States and elsewhere, has largely employed tertiary phosphine-modified rhodium catalysts. For example, over 50% of the world s butyraldehyde (qv) is produced by the LP Oxo process, technology Hcensed by Union Carbide Corporation and Davy Process Technology. 

Pla.tinum. Platinum catalysts that utilize both phosphine and tin(Il) haUde ligands give good rates and selectivities, in contrast to platinum alone, which has extremely low or nonexistent hydroformylation activity. High specificity to the linear aldehyde from 1-pentene or 1-heptene is obtained using HPtSnClgCO(1 1P) (26), active at 100°C and 20 MPa (290 psi) producing 95% -hexanal from 1-pentene. 

A further improvement in platinum catalysis is claimed from use of tin(Il) haUde and phosphine ligands which are rigid bidentates, eg, l,2-bis(diphenylphosphinomethyl)cyclobutane (27). High rates for a product containing 99% linear aldehyde have been obtained. However, a pressure of 10 MPa (1450 psi) H2 CO is requited. 

Commercial phosphine derivatives are produced either by the acid-cataly2ed addition of phosphine to an aldehyde or by free-radical addition to olefins, particulady a-olefins. The reactions usually take place in an autoclave under moderate pressures (<4 MPa (580 psi)) and at temperatures between 60 and 100°C. 

The addition of P—H bonds across a carbonyl function leads to the formation of a-hydroxy-substituted phosphines. The reaction is acid-cataly2ed and appears to be quite general with complete reaction of each P—H bond if linear aUphatic aldehydes are used. Steric considerations may limit the product to primary or secondary phosphines. In the case of formaldehyde, the quaternary phosphonium salt [124-64-1] is obtained. 

If aromatic aldehydes or ketones are used, the tertiary phosphine product sometimes rearranges to a mixed phosphine oxide. 

The hydroformylation reaction is carried out in the Hquid phase using a metal carbonyl catalyst such as HCo(CO)4 (36), HCo(CO)2[P( -C4H2)] (37), or HRh(CO)2[P(CgH3)2]2 (38,39). The phosphine-substituted rhodium compound is the catalyst of choice for new commercial plants that can operate at 353—383 K and 0.7—2 MPa (7—20 atm) (39). The differences among the catalysts are found in their intrinsic activity, their selectivity to straight-chain product, their abiHty to isomerize the olefin feedstock and hydrogenate the product aldehyde to alcohol, and the ease with which they are separated from the reaction medium (36). 

Examples are given of common operations such as absorption of ammonia to make fertihzers and of carbon dioxide to make soda ash. Also of recoveiy of phosphine from offgases of phosphorous plants recoveiy of HE oxidation, halogenation, and hydrogenation of various organics hydration of olefins to alcohols oxo reaction for higher aldehydes and alcohols ozonolysis of oleic acid absorption of carbon monoxide to make sodium formate alkylation of acetic acid with isobutylene to make teti-h ty acetate, absorption of olefins to make various products HCl and HBr plus higher alcohols to make alkyl hahdes and so on. 

Apart from tertiary amines, the reaction may be catalyzed by phosphines, e.g. tri- -butylphosphine or by diethylaluminium iodide." When a chiral catalyst, such as quinuclidin-3-ol 8 is used in enantiomerically enriched form, an asymmetric Baylis-Hillman reaction is possible. In the reaction of ethyl vinyl ketone with an aromatic aldehyde in the presence of one enantiomer of a chiral 3-(hydroxybenzyl)-pyrrolizidine as base, the coupling product has been obtained in enantiomeric excess of up to 70%, e.g. 11 from 9 - -10 ... 

Dialdehydes 8 have been converted to y-lactones 9 in the presence of a rhodium phosphine complex as catalyst. The example shown below demonstrates that this reaction works also with aldehydes that contain a-hydrogen atoms. 

The reaction of an alkylidene phosphorane 1 (i.e. a phosphorus ylide) with an aldehyde or ketone 2 to yield an alkene 3 (i.e. an olefin) and a phosphine oxide 4, is called the Wittig reaction or Wittig olefination reaction. ... 

The initial step of olefin formation is a nucleophilic addition of the negatively polarized ylide carbon center (see the resonance structure 1 above) to the carbonyl carbon center of an aldehyde or ketone. A betain 8 is thus formed, which can cyclize to give the oxaphosphetane 9 as an intermediate. The latter decomposes to yield a trisubstituted phosphine oxide 4—e.g. triphenylphosphine oxide (with R = Ph) and an alkene 3. The driving force for that reaction is the formation of the strong double bond between phosphorus and oxygen ... 

Notable examples of general synthetic procedures in Volume 47 include the synthesis of aromatic aldehydes (from dichloro-methyl methyl ether), aliphatic aldehydes (from alkyl halides and trimethylamine oxide and by oxidation of alcohols using dimethyl sulfoxide, dicyclohexylcarbodiimide, and pyridinum trifluoro-acetate the latter method is particularly useful since the conditions are so mild), carbethoxycycloalkanones (from sodium hydride, diethyl carbonate, and the cycloalkanone), m-dialkylbenzenes (from the />-isomer by isomerization with hydrogen fluoride and boron trifluoride), and the deamination of amines (by conversion to the nitrosoamide and thermolysis to the ester). Other general methods are represented by the synthesis of 1 J-difluoroolefins (from sodium chlorodifluoroacetate, triphenyl phosphine, and an aldehyde or ketone), the nitration of aromatic rings (with ni-tronium tetrafluoroborate), the reductive methylation of aromatic nitro compounds (with formaldehyde and hydrogen), the synthesis of dialkyl ketones (from carboxylic acids and iron powder), and the preparation of 1-substituted cyclopropanols (from the condensation of a 1,3-dichloro-2-propanol derivative and ethyl-... 

In the course of this study, the authors determined /Lvalues for dibenzyl, methyl phenyl, methyl p-nitrophenyl, di-p-tolyl, di-isopropyl and tetramethylene sulphoxides and for diethyl, dipropyl and dibutyl sulphites. The /Lscales are applied to the various reactions or the spectral measurements. The /Lscales have been divided into either family-dependent (FD) types, which means two or more compounds can share the same /Lscale, family-independent (FI) types. Consequently, a variety of /Lscales are now available for various families of the bases, including 29 aldehydes and ketones, 17 carboxylic amides and ureas, 14 carboxylic acids esters, 4 acyl halides, 5 nitriles, 10 ethers, 16 phosphine oxides, 12 sulphinyl compounds, 15 pyridines and pyrimidines, 16 sp3 hybridized amines and 10 alcohols. The enthalpies of formation of the hydrogen bond of 4-fluorophenol with both sulphoxides and phosphine oxides and related derivatives fit the empirical equation 18, where the standard deviation is y = 0.983. Several averaged scales are shown in Table 1588. 

The industrially used homogeneous catalysts for the hydroformylation of higher molecular olefins into aldehydes, which are hydrogenated to the corresponding surfactant alcohols, are cobalt carbonyl [47] or cobalt carbonylItert-phosphine complexes [48]. 

---