Phase transfer halides

As expected for a Finkelstein reaction, phase-transferred halide ions behave as bases as well as nucleophiles. Bromocyclohexane is reported to react with 18-crown-6 activated potassium fluoride to quantitatively yield cyclohexene [2]. The corresponding reaction of chlorocyclohexane in which fluoride ion is associated with a resin-bound quaternary ion yields only 50% cyclohexene [5]. Quantitative alkene formation is observed, however, when sec-octyl bromide is treated with potassium fluoride in the presence of hexadecyltributylphosphonium ion [1]. A more complicated situation is encountered in the reaction of 2-chloro-2-methylcyclohexanone with fluoride ion. In this case, a mixture of elimination and substitution products is obtained (69% and 31% respectively, see Eq. 9.2) [2]. The elimination reactions of phase-transferred halide ions are included in Table 9.1. 

A newer and equally effective way of swapping azides with halides (bromines or iodines) is in the use of phase transfer catalysts [68]. Strike wouldn t expect an underground chemist to purchase the exotic catalyst Aliquat 336 which the investigators in this reference used to get yields approaching 100% but an alternative catalyst of... 

The benzoic acid derivative 457 is formed by the carbonylation of iodoben-zene in aqueous DMF (1 1) without using a phosphine ligand at room temperature and 1 atm[311]. As optimum conditions for the technical synthesis of the anthranilic acid derivative 458, it has been found that A-acetyl protection, which has a chelating effect, is important[312]. Phase-transfer catalysis is combined with the Pd-catalyzed carbonylation of halides[3l3]. Carbonylation of 1,1-dibromoalkenes in the presence of a phase-transfer catalyst gives the gem-inal dicarboxylic acid 459. Use of a polar solvent is important[314]. Interestingly, addition of trimethylsilyl chloride (2 equiv.) increased yield of the lactone 460 remarkabiy[3l5]. Formate esters as a CO source and NaOR are used for the carbonylation of aryl iodides under a nitrogen atmosphere without using CO[316]. Chlorobenzene coordinated by Cr(CO)j is carbonylated with ethyl formate[3l7]. 

Aryl sulfides are prepared by the reaction of aryl halides with thiols and thiophenol in DMSO[675,676] or by the use of phase-transfer catalysis[677]. The alkenyl sulfide 803 is obtained by the reaction of lithium phenyl sulfide (802) with an alkenyl bromide[678]. 

Nucleophilic substitution by azide ion on an alkyl halide (Sections 8 1 8 13) Azide ion IS a very good nucleophile and reacts with primary and secondary alkyl halides to give alkyl azides Phase transfer cata lysts accelerate the rate of reaction... 

Benzodiazepinones are alkylated at N1 with alkyl halides in the presence of aqueous alkali under phase-transfer conditions to give products 2.281... 

The preparation of mono- and di-tm-butylcyclopentadienes 1 and 2 starting from monomeric cyclopentadiene was reported first in 1963 [23]. It was noted that the nucleophilic attack of the cyclopentadienide anion on ferf-alkyl halide has to compete with elimination reaction giving isobutene. The yield of the di- and tri-fer/-butylcyclopentadienes 2 and 3 was therefore reported to be modest to low [23, 24], Recently an elegant improvement for this synthesis using phase transfer catalysis was presented (Eq. 1), but the availability of the tri-substituted derivative... 

Sulphoxides can be used as phase transfer catalysts, for example, a-phosphoryl sulphoxides (Scheme 24) have been used as phase transfer catalysts in the two-phase alkylation of phenylacetonitrile or phenylacetone with alkyl halides and aqueous sodium hydroxide. However, they are considered to be inefficient catalysts for simple displacement reactions226. 

Recently, it has been reported that methyl 2-pyridyl sulphoxides (10) and related pyridyl derivatives (11) (see Schepie 25) are good phase transfer catalysts for SN2 reactions of various primary or secondary alkyl halides in a two-phase reaction system and for the alkylation of phenylacetonitrile or phenylacetone with alkyl halides in liquid-liquid two-... 

Alkenyl alcohols, (E) disubstituted, 55, 66 ALKYL HALIDES, alkenes from, 55, 103 C-ALKYLATION, phase transfer catalysis... 

Quaternary ammonium compounds (quats) are prepared - by moderate heating of the amine and the alkyl halide in a suitable solvent - as the chlorides or the bromides. Subsequently conversion to the hydroxides may be carried out. Major applications of the quat chlorides are as fabric softeners and as starch cationizing agent. Several bio-active compounds (agrochemicals, pharmaceuticals) possess the quat-structure. Important applications of quat bromides are in phase transfer catalysis and in zeolite synthesis. 

The reaction between acyl halides and alcohols or phenols is the best general method for the preparation of carboxylic esters. It is believed to proceed by a 8 2 mechanism. As with 10-8, the mechanism can be S l or tetrahedral. Pyridine catalyzes the reaction by the nucleophilic catalysis route (see 10-9). The reaction is of wide scope, and many functional groups do not interfere. A base is frequently added to combine with the HX formed. When aqueous alkali is used, this is called the Schotten-Baumann procedure, but pyridine is also frequently used. Both R and R may be primary, secondary, or tertiary alkyl or aryl. Enolic esters can also be prepared by this method, though C-acylation competes in these cases. In difficult cases, especially with hindered acids or tertiary R, the alkoxide can be used instead of the alcohol. Activated alumina has also been used as a catalyst, for tertiary R. Thallium salts of phenols give very high yields of phenolic esters. Phase-transfer catalysis has been used for hindered phenols. Zinc has been used to couple... 

A carboxylic acid (not the salt) can be the nucleophile if F is present. Mesylates are readily displaced, for example, by benzoic acid/CsF. Dihalides have been converted to diesters by this method. A COOH group can be conveniently protected by reaction of its ion with a phenacyl bromide (ArCOCH2Br). The resulting ester is easily cleaved when desired with zinc and acetic acid. Dialkyl carbonates can be prepared without phosgene (see 10-21) by phase-transfer catalyzed treatment of primary alkyl halides with dry KHCO3 and K2C03- ... 

In a variation of this reaction, alkyl halides can be converted to carbamates, by treatment with a secondary amine and K2CO3 under phase-transfer conditions. ... 

Unsymmetrical as well as symmetrical anhydrides are often prepared by the treatment of an acyl halide with a carboxylic acid salt. The compound C0CI2 has been used as a catalyst. If a metallic salt is used, Na , K , or Ag are the most common cations, but more often pyridine or another tertiary amine is added to the free acid and the salt thus formed is treated with the acyl halide. Mixed formic anhydrides are prepared from sodium formate and an aryl halide, by use of a solid-phase copolymer of pyridine-l-oxide. Symmetrical anhydrides can be prepared by reaction of the acyl halide with aqueous NaOH or NaHCOa under phase-transfer conditions, or with sodium bicarbonate with ultrasound. 

A convenient way of obtaining secondary amines without contamination by primary or tertiary amines involves treatment of alkyl halides with the sodium or calcium salt of cyanamide NH2—CN to give disubstituted cyanamides, which are then hydrolyzed and decarboxylated to secondary amines. Good yields are obtained when the reaction is carried out under phase-transfer conditions. The R group may be primary, secondary, allylic, or benzylic. 1, co-Dihalides give cyclic secondary amines. 

Amides are very weak nucleophiles, far too weak to attack alkyl halides, so they must first be converted to their conjugate bases. By this method, unsubstituted amides can be converted to N-substituted, or N-substituted to N,N-disubstituted, amides. Esters of sulfuric or sulfonic acids can also be substrates. Tertiary substrates give elimination. O-Alkylation is at times a side reaction. Both amides and sulfonamides have been alkylated under phase-transfer conditions. Lactams can be alkylated using similar procedures. Ethyl pyroglutamate (5-carboethoxy 2-pyrrolidinone) and related lactams were converted to N-alkyl derivatives via treatment with NaH (short contact time) followed by addition of the halide. 2-Pyrrolidinone derivatives can be alkylated using a similar procedure. Lactams can be reductively alkylated using aldehydes under catalytic hydrogenation... 

Alkyl azides can be prepared by treatment of the appropriate halide with azide ion. ° Phase-transfer catalysis,ultrasound,and using reactive clays as a... 

Palladium complexes also catalyze the carbonylation of halides. Aryl (see 13-13), vinylic, benzylic, and allylic halides (especially iodides) can be converted to carboxylic esters with CO, an alcohol or alkoxide, and a palladium complex. Similar reactivity was reported with vinyl triflates. Use of an amine instead of the alcohol or alkoxide leads to an amide. Reaction with an amine, AJBN, CO, and a tetraalkyltin catalyst also leads to an amide. Similar reaction with an alcohol, under Xe irradiation, leads to the ester. Benzylic and allylic halides were converted to carboxylic acids electrocatalytically, with CO and a cobalt imine complex. Vinylic halides were similarly converted with CO and nickel cyanide, under phase-transfer conditions. ... 

This reaction is similar to 13-1 and, like that one, generally requires activated substrates. With unactivated substrates, side reactions predominate, though aryl methyl ethers have been prepared from unactivated chlorides by treatment with MeO in HMPA. This reaction gives better yields than 13-1 and is used more often. A good solvent is liquid ammonia. The compound NaOMe reacted with o- and p-fluoronitrobenzenes 10 times faster in NH3 at — 70°C than in MeOH. Phase-transfer catalysis has also been used. The reaction of 4-iodotoluene and 3,4-dimethylphenol, in the presence of a copper catalyst and cesium carbonate, gave the diaryl ether (Ar—O—Ar ). Alcohols were coupled with aryl halides in the presence of palladium catalysts to give the Ar—O—R ether. Nickel catalysts have also been used. ... 

The reaction with ammonia or amines, which undoubtedly proceeds by the SnAt mechanism, is catalyzed by copper and nickel salts, though these are normally used only with rather unreactive halides. This reaction, with phase-transfer catalysis, has been used to synthesize triarylamines. Copper ion catalysts (especially cuprous oxide or iodide) also permit the Gabriel synthesis (10-61) to be... 

---