Pemulen

DI Water d-Li monene Pemulen TR-I resin Propylene Glycol G1yceri ne Neodol 25-7 Germaben IIE NaOH (18%)... [Pg.88]

Place the d-limonene in a beaker and add the Carbopol or Pemulen resin to the solvent. (Sifting the resin into the solvent is recommended but not required.)... [Pg.88]

Pemulen resins provide efficient and stable emulsification of d-limonene solvent in waterless hand cleaners and hard surface cleaners... [Pg.88]

Acritamer acrylic acid polymer Carbopol carboxy polymethylene, polyacrylic acid carboxyvinyl polymer Pemulen Ultrez. [Pg.111]

BE Goodrich Company. Technical literature Carbopol, Noveon, Pemulen resins handbook, 1995. [Pg.115]

FIG. 12 Pseudophase diagram for 30 wt% cyclohexane in water stabilized by HMPAA (Pemulen TR 2). The c values are shown as the curve drawn in the bottom left-hand corner of the diagram. (Reprinted from Colloids and Surfaces A Physi-cochem Eng Aspects, 88, Lochhead RY, Rulinson CJ, An investigation of the mechanism by which hydrophobically modified hydrophilic polymers act as primary emulsifiers for oil in water emulsions. 1. Poly(acrylic acids) and hydroxethyl celluloses. 27-32, Copyright (1994), with permission from Elsevier Science.)... [Pg.392]

Simovic S, Milic-Askrabic J, Vuleta G, Ibric S, Stupar M. The influence of processing variables on performance of OAV emulsion gels based on polymeric emulsifier (Pemulen TR-2NF). International J Cosmetic Sci 1999 21 119-125. [Pg.430]

Brisaert M, Plaizier-Vercammen. Investigation of the emulsifying properties of Pemulen TR 1, an acrylic acid alkyl methacrylate copolymer. STP Pharma Sciences 1997 7 438-444. [Pg.440]

Silicone oil can be emulsified and stabilized via the use of Pemulen resins. The resins stabilize emulsions via electrostatic stabilization. This relieves the constraint of seeking an appropriate surfactant emulsifier. [Pg.170]

Use a Lightnin Mixer or similar variable speed unit and an impeller suitable for general mixing and blending operations. Screen the Pemulen resin into the vortex of the rapidly agitating water (800 rpm). Allow to mix until homogeneous and free of polymer lumps. [Pg.170]

Heat the Pemulen dispersion to 90C. Add the Pemulen dispersion to the melted wax with vigorous agitation. [Pg.176]

Hydropalat 535 Hydropalat 535N surfactant, water-resistance coatings Pemulen 1622 surfactant, wax emulsions Kosteran-T/1 Sorbitan tallate surfactant, waxes... [Pg.1620]

Peltex. See Ferro-chromium lignosulfonate Pemulen TR-1, Pemulen TR-2. See Acrylates/C10-30 alkyl acrylate crosspolymer Penacolite B-18-S, Penacolite B-19-S, Penacolite R-2170, Penacolite R-2200. See Resorcinol-formaldehyde resin PenBind 100. See Potato (Solanum tuberosum) starch... [Pg.3224]

Dodwell R, Lochhead R, Hemmker W. Pemulen polymeric emulsifiers what they are, how they work. Cosmet Toilet Manf World 1993 77-80, 83-86. [Pg.283]

Chemical Description Copolymers of acrylic or methacrylic acid and a long-chain alkyl acrylate cross-linked with an allyl ether pentaerythritol or sucrose Trade Names Carbopol 1342, 1382 resins Pemulen TR-1 TR-2 resins... [Pg.619]

Function in Formula Carbopol 1342 and 1382 resins are thickening/gelling and suspending agents for surfactant systems Pemulen TR-1 and TR-2 resins are primary emulsifiers for lotions and creams... [Pg.619]

Use Concentration 0.5-1.5% in shampoos, shower gels, and sanitizing gels (Carbopol 1342 and 1382) 0.1-0.2% in creams, lotions, and low to high viscosity emulsions (Pemulen TR-1 and TR-2)... [Pg.619]

Regulatory Status Carbopol 1382 and Pemulen TR-1 and TR-2 are manufactured without benzene. Carbopol 1342 and Pemulen TR-1 and TR-2 are approved by Japanese MHW Special Comments If higher-viscosity emulsions are required, Carbopol resins may be used in combinations with Pemulen TR-1. Pemulen TR-2 is effective where the mode of emulsion applications is via spray mechanism Form Supplied Powder Supplier BF Goodrich... [Pg.619]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...