Pd*"’ complexes

Although Pd is cheaper than Rh and Pt, it is still expensive. In Pd(0)- or Pd(ll)-catalyzed reactions, particularly in commercial processes, repeated use of Pd catalysts is required. When the products are low-boiling, they can be separated from the catalyst by distillation. The Wacker process for the production of acetaldehyde is an example. For less volatile products, there are several approaches to the economical uses of Pd catalysts. As one method, an alkyldi-phenylphosphine 9, in which the alkyl group is a polyethylene chain, is prepared as shown. The Pd complex of this phosphine has low solubility in some organic solvents such as toluene at room temperature, and is soluble at higher temperature[28]. Pd(0)-catalyzed reactions such as an allylation reaction of nucleophiles using this complex as a catalyst proceed smoothly at higher temperatures. After the reaction, the Pd complex precipitates and is recovered when the reaction mixture is cooled. 

Another reaction in the last step is the syn elimination ofhydrogen with Pd as H—Pd—X, which takes place with alkyl Pd complexes, and the Pd hydride and an alkene are formed. The insertion of an alkene into Pd hydride and the elimination of, (3-hydrogen are reversible steps. The elimination of, 3-hydrogen generates the alkene, and both the hydrogen and the alkene coordinate to Pd, increasing the coordination number of Pd by one. Therefore, the / -elimination requires coordinative unsaturation on Pd complexes. The, 3-hydrogen eliminated should be syn to Pd. 

Three oxidative reactions of benzene with Pd(OAc)2 via reactive rr-aryl-Pd complexes are known. The insertion of alkenes and elimination afford arylalk-enes. The oxidative functionalization of alkenes with aromatics is treated in Section 2.8. Two other reactions, oxidative homocoupling[324,325] and the acetoxylation[326], are treated in this section. The palladation of aromatic compounds is possible only with Pd(OAc)2. No reaction takes place with PdCl2. 

Oxidative addition of alkyl halides to Pd(0) is slow. Furthermore, alkyl-Pd complexes, formed by the oxidative addition of alkyl halides, undergo facile elimination of /3-hydrogen and the reaction stops at this stage without undergoing insertion or transmetallation. Although not many examples are available, alkynyl iodides react with Pd(0) to form alkynylpalladium complexes. 

The 7V-methylbenzo[( e]quinoline 426 was prepared by trapping the insertion product of an internal alkyne with a tertiary dimethylamine. One methyl group is eliminated. The dimethylaminonaphthalene-Pd complex 427 is an active catalyst and other Pd compounds are inactive[290a]. 

The TT-allylpalladium complexes 241 formed from the ally carbonates 240 bearing an anion-stabilizing EWG are converted into the Pd complexes of TMM (trimethylenemethane) as reactive, dipolar intermediates 242 by intramolecular deprotonation with the alkoxide anion, and undergo [3 + 2] cycloaddition to give five-membered ring compounds 244 by Michael addition to an electron-deficient double bond and subsequent intramolecular allylation of the generated carbanion 243. This cycloaddition proceeds under neutral conditions, yielding the functionalized methylenecyclopentanes 244[148], The syn-... 

Conversion of 5-allylthioimidates into /V-allylthioamides is catalyzed by Pd(Il). 2-Allylthiopyridine (820) is converted into the less stable l-allyl-2-thio-pyridone 821 owing to Pd complex formation[509], Claisen rearrangement of 2-(allylthio)pyrimidin-4-(3//)-one (822) affords the A-l-allylation product 823 as the main product rather than the A -3-allylation product 824[510] The smooth rearrangement of the allylic thionobenzoate 825 to the allyl thiolo-benzoate 826 is catalyzed by both PdCl2(PhCN)2 and Pd(Ph3P)4 by different mechanisms[511],... 

Dimerization is the main path. However, trimerization to form 1.3,6,10-dodecatetraene (15) takes place with certain Pd complexes in the absence of a phosphine ligand. The reaction in benzene at 50 C using 7r-allylpalladium acetate as a catalyst yielded 1,3,6,10-dodecatetraene (15) with a selectivity of 79% at a conversion of 30% based on butadiene in 22 h[ 19,20]. 1,3,7-Octatriene (7) is dimerized to 1,5,7,10.15-hexadecapentaene (16) with 70% selectivity by using bis-rr-allylpalladium. On the other hand. 9-allyl-l,4,6.12-tridecatetraene (17) is formed as the main product when PI13P is added in a 1 1. ratio[21]. 

Organometallic compounds which have main group metal-metal bonds, such as S—B, Si—Mg,- Si—Al, Si—Zn, Si—Sn, Si—Si, Sn—Al, and Sn—Sn bonds, undergo 1,2-dimetallation of alkynes. Pd complexes are good catalysts for the addition of these compounds to alkynes. The 1,2-dimetallation products still have reactive metal-carbon bonds and are used for further transformations. 

Telomerization of 3,3-dimethyldiaziridine with butadiene catalyzed by Pd complexes yielded 2 1 adducts (123) and (124) (80IZV220). 

A common property of coordinated alkenes is their susceptibility to attack by nucleophiles such as OH , OMe , MeC02, and Cl , and it has long been known that Zeise s salt is slowly attacked by non-acidic water to give MeCHO and Pt metal, while corresponding Pd complexes are even more reactive. This forms the basis of the Wacker process (developed by J. Smidt and his colleagues at Wacker Chemie, 1959-60) for converting ethene (ethylene) into ethanal (acetaldehyde) — see Panel overleaf. 

Bhattacharjee et al. [79] introduced another new catalyst based on a Pd complex containing both acetate and benzoyl pyridine ligands (Table 6). This was developed to hydrogenate liquid carboxylated nitrile rubber (L-XNBR) [80]. Selective hydrogenation of C=C in L-... 

In an extension of this work, the Shibasaki group developed the novel transformation 48—>51 shown in Scheme 10.25c To rationalize this interesting structural change, it was proposed that oxidative addition of the vinyl triflate moiety in 48 to an asymmetric palladium ) catalyst generated under the indicated conditions affords the 16-electron Pd+ complex 49. Since the weakly bound triflate ligand can easily dissociate from the metal center, a silver salt is not needed. Insertion of the coordinated alkene into the vinyl C-Pd bond then affords a transitory 7t-allylpalladium complex 50 which is captured in a regio- and stereocontrolled fashion by acetate ion to give the optically active bicyclic diene 51 in 80% ee (89% yield). This catalytic asymmetric synthesis by a Heck cyclization/ anion capture process is the first of its kind. 

Bromomethyl-6,7-dichloro-2,3-dimethoxyquinoxaline (284) gave 6,7-dichloro-5-(3-chloroacetonyl)-2,4-dimethoxyquinoxaline (285) (by treatment of a derived Zn complex with CICH2COCI in the presence of a Pd complex as catalyst 75%. See original paper for considerable detail. )... 

As was the case for the Ni (123) and Pd/C2H4 (140) systems, each of the binary olefin complexes isolated has associated with it a moderately intense, UV band, the bands for Pd complexes lying at higher energy than those of the nickel complexes in addition, for each olefin sys-... 

Pd-catalyzed asymmetric allylic alkylation is a typical catalytic carbon-carbon bond forming reaction [ 126 -128]. The Pd-complex of the ligand (R)-3b bearing methyl, 2-biphenyl and cyclohexyl groups as the three substituents attached to the P-chirogenic phosphorus atom was found to be in situ an efficient catalyst in the asymmetric allylic alkylation of l-acetoxy-l,3-diphenylprop-2-en (4) with malonate derivatives in the presence of AT,0-bis(trimethylsilyl)acetamide (BSA) and potassium acetate, affording enantioselectivity up to 96% and quantitative... 

---