Particle Sizing Systems, Accusizer

Fig. 9.12 Schematic diagram of the Particle Sizing Systems Accusizer autodilution apparatus and optical particle counter.

Nicomp Model 380/L is designed for on-line monitoring either by itself or in combination with the Particle Sizing System AccuSizer. These instruments are available from Particle Sizing Systems. 

Figure 6.12. The resolution of the particle size information which can be obtained with photozone stream counters is illustrated by data for a mixture of latex spheres generated by the Particle Sizing Systems Accusizer 770.

Figure 4. Volume-weighted particles size distribution of calcined MSU-1 Silica obtained with Tergitol 15S12. Particle sizing was performed with an Accusizer 770A (NICOMP, Particle Sizing Systems Co (CA, USA)).

AccuSizer, Particle Sizing Systems Co., 75 Aero Camino, Santa Barbara, California, 93117. 

Particle-Sizing Systems Inc. Accusizer size-range. Available at http //www.pssnicomp.com/acculab.htm. 

Figure 12.13 Auto-dilution and optical particle sensor schematic of the Accusizer 770, where MC = mixing chamber, Vi, Vi, V3 = valves, P = pump, OPS = optical particle sensor, LS = laser source, D = detector, V s volts and PHA = pulse height analyser. (Courtesy of Particle Sizing Systems.)...

The Particle Sizing System (PSS) AccusizerLPC Is Available for Both Bench-top Bottle Sample Measurement and On-line Semi-continuous Particle Measurement (see http // pssnicomp.com/products/accusizer last accessed November 2014). 

The particle size analysis of the powder after crushing for 2 h with the assistance of a planetary crusher at a rate of 250 revolutions/min and calibrated with 100 mm was determined using a Particle Sizing Systems (Inc. Santa Barbara, California, USA Model 770 AccuSizer). The particle diameters range varied from 0.5 to 54 mm (Fig. 2). 

---