Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Parameter for poly

Table 2 VFT Parameters for Poly(organoboron halide)-imidazole Complexes... Table 2 VFT Parameters for Poly(organoboron halide)-imidazole Complexes...
Peppas N, Merrill E. Determination of interaction parameter for poly(vinyl alcohol) in gels crosslinked from solution. Journal of Polymer Science 1976, 14, 459 464. [Pg.238]

The research below focusses on the NMR parameters for poly(dA-dT) in 1 M tetramethylammonium chloride (TMA+) relative to their value in the same concentration of sodium chloride. The methyl groups shield the charged nitrogen in the TMA+ ion and it was of interest to determine whether conformational changes occur in the synthetic DNA when the counterion was changed from Na+ to TMA+. [Pg.235]

In the "Polymer Handbook" we find two sets of Mark-Houwink parameters for poly (methyl methacrylate) in toluene at 25 °C... [Pg.265]

Janik I, Kasprzak E, Al-Zier A, Rosiak JM (2003) Radiation crosslinking and scission parameters for poly(vinyl methyl ether) in aqueous solution. Nucl Instrum Methods Phys Res B... [Pg.127]

Ashworth, A. J. Price, G. J., "Comparison of Static with Gas Chromatographic Interaction Parameters and Estimation of the Solubility Parameter for Poly(dimethylsiloxane)," Macromolecules, 19, 362 (1986b). [Pg.166]

DiPaola-Baranyi, G. Guillet, J. E., "Estimation of Solubility Parameters for Poly(vinyl acetate) by Inverse Gas Chromatography," J. Chromatogr., 166, 349 (1978b). [Pg.169]

Gechele, G. B. Crescentini, L., "Phase Separation, Viscosity, and Thermodynamic Parameters for Poly-2-methyl-5-vinylpyridine- Diluent Systems," J. Polym. Sci., Part A., 3, 3599 (1965). [Pg.172]

Gottlieb, M. and Herskowitz, M., Estimation of the Flory-Huggins parameter for poly(dimethylsilox-ane) solutions by the UNIFAC group contribution method. Macromolecules, 14, 1468, 1981. [Pg.739]

The enthalpic and entropic components of the interaction parameter for poly(methyl methacrylate) in various solvents at 20 °C (from Casassa, 1970)... [Pg.49]

Fig. 12.8. The theoretical temperature dependence of the components of the interaction parameter for poly(a-methylstyrene) in n-butyl chloride 1, Flory-Huggins contribution 2, free volume contribution 3, sum of 1 and 2 (after Croucher and Hair, 1978). Fig. 12.8. The theoretical temperature dependence of the components of the interaction parameter for poly(a-methylstyrene) in n-butyl chloride 1, Flory-Huggins contribution 2, free volume contribution 3, sum of 1 and 2 (after Croucher and Hair, 1978).
FIGURE 45 The relationship between fractal dimension of solvent molecules swarm 8 and Floiy-Huggins interaction parameter for poly(methyl methacrylate) (1), poly stirene (2), poly(vinyl acetate) (3) and polysulfone (4). [Pg.109]

Terada, M. and Marchessault, R.H. (1999) Determination of solubility parameters for poly(3-hydroxyalkanaotes). International Journal of Biological Macromolecules, 25, 207-215. [Pg.167]

Shih, H. Flory, P. J., Equation-of-State Parameters for Poly(dimethylsiloxane). Macromolecules 1972, 5, 758-761. [Pg.116]

Table 19.1. Best-fit site-dissociation model parameters for poly(ethylene glycol)s (PEGs) of various molecular weights grafted to APS-modified quartz (cf. Figure 19.9)... Table 19.1. Best-fit site-dissociation model parameters for poly(ethylene glycol)s (PEGs) of various molecular weights grafted to APS-modified quartz (cf. Figure 19.9)...
WUY Wu, Y.-M., Direct determinationof thermodynamic quantities and solubility parameter for poly(tetramethylene p-silphenylene siloxane) by gas liquid chromatography (Chin.), Sepu, 4, 232, 1986. [Pg.462]

LEZ Lezcano, E.G., Salom, C., Masegosa, R.M., and Prolongo, M.G., Polymer-solvent interaction parameter for poly(4-hydroxystyrene) by GC,Polym. Bull., 34,677, 1995. [Pg.464]

FRE Frezzotti, D. and Ravanetti, G.P., Evaluation of the Flory-Huggins interaction parameter for poly(styrene-co-acrylonitrile) and poly(methyl methacrylate) blertd from enthalpy of mixing measurements, J. Calorim. Anal. Therm., 24, 135,1993. [Pg.524]

Calculate the solubility parameter for poly(vinyl butyl ether). Take the polymer density as 1.0 g/cm. ... [Pg.481]

Figure 12 shows the results for the modeling of the solubility of the copolymer poly(ethylene-co-l-butene) in propane. The pure-component parameters for poly (ethylene) (HOPE), poly(l-butene), and propane as well as the binary parameters for HDPE/propane and poly(l-butene)/propane were used as determined for the homopolymer systems. [Pg.347]

Developing MM parameters for (poly)saccharides is notoriously difficult [247]. With GLYCAM06 [36, 248] Woods and coworker presented a new consistent and... [Pg.32]

Mohd-Adnan, A.-F., Nishida, H., and Shirai, Y. (2008). Evaluation of kinetics parameters for poly(L-lactic acid) hydrolysis under high-pressure steam, Polym. Degrad. Stab., 93,1053-1058. [Pg.328]

Table I. Dielectric transition parameters for poly(propylene oxide). [Pg.264]

See other pages where Parameter for poly is mentioned: [Pg.22]    [Pg.455]    [Pg.449]    [Pg.22]    [Pg.323]    [Pg.51]    [Pg.31]    [Pg.517]    [Pg.187]    [Pg.86]    [Pg.388]   


SEARCH



© 2024 chempedia.info