Polymer Handbook

Orwoll R A and Arnold P A 1996 Polymer-solvent interaotion parameter y Physical Properties of Polymers, Handbook ed J E Mark (Woodbury, NY AlP) oh 14... 

Inhibitors are characterized by inhibition constants which are defined as the ratio of the rate constant for transfer to inhibitor to the propagation constant for the monomer in analogy with Eq. (6.87) for chain transfer constants. For styrene at 50°C the inhibition constant of p-benzoquinone is 518, and that for O2 is 1.5 X 10. The Polymer Handbook (Ref. 3) is an excellent source for these and most other rate constants discussed in this chapter. 

The reactivity ratios of a copolymerization system are the fundamental parameters in terms of which the system is described. Since the copolymer composition equation relates the compositions of the product and the feedstock, it is clear that values of r can be evaluated from experimental data in which the corresponding compositions are measured. We shall consider this evaluation procedure in Sec. 7.7, where it will be found that this approach is not as free of ambiguity as might be desired. For now we shall simply assume that we know the desired r values for a system in fact, extensive tabulations of such values exist. An especially convenient source of this information is the Polymer Handbook (Ref. 4). Table 7.1 lists some typical r values at 60°C. 

A. Grobe, Properties of Cellulose Materials, Polymer Handbook, 3rd ed., John Wiley Sons, Inc., New York, 1989, pp. 117—170. 

J. Brandmp and E. H. Immergut, eds.. Polymer Handbook, Wiley-Interscience, New York, 1967. 

Methods for measurement of kp have been reviewed by Stickler,340 41 van Herk Vl and more recently by Beuermann and Buback.343 A largely non critical summary of values of kp and k, obtained by various methods appears in the Polymer Handbook.344 Literature values of kp for a given monomer may span two or more orders of magnitude. The data and methods of measurement have heen critically assessed by IUPAC working parties"45"01 and reliable values for most common monomers are now available. 43 The wide variation in values of kp (and k,) obtained from various studies docs not reflect experimental error but differences in data interpretation and the dependence of kinetic parameters on chain length and polymerization conditions. 

Chain transfer is kinetically equivalent to copolymerization. The Q-e and Patterns of Reactivity schemes used to predict reactivity ratios in copolymerization (Section 7.3.4) can also be used to predict reactivities (chain transfer constants) in chain transfer and the same limitations apply. Tabulations of the appropriate parameters can be found in the Polymer Handbook 3 ... 

---